GMCforum: GMCnet » [GMCnet] Simple way to remove steel frame from a gmc.

Home » Public Forums » GMCnet » [GMCnet] Simple way to remove steel frame from a gmc.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Simple way to remove steel frame from a gmc. [message #321299]

Sun, 30 July 2017 13:03

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

Get Bobcat out of shop. Flip GMC up side down. Remove frame. NOTE. NOT recommended for all applications. GRIN. Finally getting down to the END. Bob Dunahugh 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Simple way to remove steel frame from a gmc. [message #321307 is a reply to message #321299]

Sun, 30 July 2017 14:43

Mike Kelley

Messages: 467
Registered: February 2017

Karma: -2

Senior Member

Bob:
Cool idea!
Just wish I had a bobcat - Ha!
To get out of the shop I also wish I had!
Mike/The Corvair a holic

Sent from my iPhone

> On Jul 30, 2017, at 1:03 PM, Bob Dunahugh wrote:
>
> Get Bobcat out of shop. Flip GMC up side down. Remove frame. NOTE. NOT recommended for all applications. GRIN. Finally getting down to the END. Bob Dunahugh 78 Royale
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Previous Topic:	[GMCnet] ignition problem
Next Topic:	[GMCnet] I was told that the outside body panel around the rear tires was impossible to remove, and not break. Wrong.

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 02 11:23:40 CDT 2024

Total time taken to generate the page: 0.00555 seconds