GMCforum: GMCnet » Front Wheel Bearing tool & Torsion Bar Unloader tool

Home » Public Forums » GMCnet » Front Wheel Bearing tool & Torsion Bar Unloader tool

Show: Today's Messages :: Polls :: Message Navigator

Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320132]

Fri, 07 July 2017 19:51

carnutbill

Messages: 65
Registered: February 2004
Location: Rochester N.Y.

Karma: 0

Member

For sale on Ebay are a Front wheel bearing tool, Torsion bar unloader tool & Bogie pins.

http://www.ebay.com/itm/152604932422?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

http://www.ebay.com/itm/152604883409?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

http://www.ebay.com/itm/152604864453?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2648

Report message to a moderator

Re: Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320136 is a reply to message #320132]

Fri, 07 July 2017 21:54

Bullitthead

Messages: 1411
Registered: November 2013

Karma: 5

Senior Member

The Body Electric down here in Red Sector A needs that bearing tool so I will not have to service them again or take them apart for rotor work (according to Murphy's Law) Cool

I put it in my watchlist, but I will surely be outbid by a dollar at the end of the auction, so I may have to do without or Rube Goldberg my own like last time.

Terry Kelpien ASE Master Technician 73 Glacier 260 Smithfield, Va.

Report message to a moderator

Re: [GMCnet] Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320137 is a reply to message #320136]

Fri, 07 July 2017 22:00

James Hupy

Messages: 6806
Registered: May 2010

Karma: -62

Senior Member

The torsion bar tool is one of my early ones that does not have the
business end turned smaller for clearance. Still, if the price is right, .
Jim Hupy

On Jul 7, 2017 7:55 PM, "Terry" wrote:

> The Body Electric down here in Red Sector A needs that bearing tool so I
> will not have to service them again or take them apart for rotor work
> (according to Murphy's Law) 8)
>
> I put it in my watchlist, but I will surely be outbid by a dollar at the
> end of the auction, so I may have to do without or Rube Goldberg my own like
> last time.
> --
> Terry Kelpien
>
> ASE Master Technician
>
> 73 Glacier 260
>
> Smithfield, Va.
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320138 is a reply to message #320132]

Fri, 07 July 2017 22:20

bdub

Messages: 1578
Registered: February 2004
Location: Central Texas

Karma: 5

Senior Member

Beware!
The bearing tool is missing the OTC 927 Puller which is over $100 by itself.

Early Bogie Pins are used.

On Fri, Jul 7, 2017 at 7:51 PM, Bill Gagnier wrote:

> For sale on Ebay are a Front wheel bearing tool, Torsion bar unloader tool
> & Bogie pins.
>
> http://www.ebay.com/itm/152604932422?ssPageName=STRK:MESELX:
> IT&_trksid=p3984.m1555.l2649
>
> http://www.ebay.com/itm/152604883409?ssPageName=STRK:MESELX:
> IT&_trksid=p3984.m1555.l2649
>
> http://www.ebay.com/itm/152604864453?ssPageName=STRK:MESELX:
> IT&_trksid=p3984.m1555.l2648
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm

Report message to a moderator

Re: [GMCnet] Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320141 is a reply to message #320138]

Sat, 08 July 2017 05:54

Bruce Hart

Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming

Karma: 5

Senior Member

On the unloader tool he wants another $41 for shipping?

On Fri, Jul 7, 2017 at 9:20 PM, Billy Massey wrote:

> Beware!
> The bearing tool is missing the OTC 927 Puller which is over $100 by
> itself.
>
> Early Bogie Pins are used.
>
>
>
> On Fri, Jul 7, 2017 at 7:51 PM, Bill Gagnier wrote:
>
>> For sale on Ebay are a Front wheel bearing tool, Torsion bar unloader
> tool
>> & Bogie pins.
>>
>> http://www.ebay.com/itm/152604932422?ssPageName=STRK:MESELX:
>> IT&_trksid=p3984.m1555.l2649
>>
>> http://www.ebay.com/itm/152604883409?ssPageName=STRK:MESELX:
>> IT&_trksid=p3984.m1555.l2649
>>
>> http://www.ebay.com/itm/152604864453?ssPageName=STRK:MESELX:
>> IT&_trksid=p3984.m1555.l2648
>>
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

Re: [GMCnet] Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320143 is a reply to message #320141]

Sat, 08 July 2017 07:04

carnutbill

Messages: 65
Registered: February 2004
Location: Rochester N.Y.

Karma: 0

Member

Shipping is actual cost $14 not $41.

Report message to a moderator

Re: [GMCnet] Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320148 is a reply to message #320143]

Sat, 08 July 2017 08:57

GMC.LES

Messages: 505
Registered: April 2014

Karma: -2

Senior Member

Ebay Seller "earlydistantwarning"is Marcus McGee, who used to frequent GMCnet in the past. He is trustworthy, and and interesting character to meet.

Les Burt
Montreal
'75 Eleganza 26'

> On Jul 8, 2017, at 8:04 AM, Bill Gagnier wrote:
>
>
> Shipping is actual cost $14 not $41.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Front Wheel Bearing tool & Torsion Bar Unloader tool [message #320162 is a reply to message #320148]

Sat, 08 July 2017 13:34

bdub

Messages: 1578
Registered: February 2004
Location: Central Texas

Karma: 5

Senior Member

I haven't heard anything out of Marcus in many years. Glad he's putting
the rest of his GM stuff back into the community.

bdub

On Sat, Jul 8, 2017 at 8:57 AM, Les Burt wrote:

> Ebay Seller "earlydistantwarning"is Marcus McGee, who used to frequent
> GMCnet in the past. He is trustworthy, and and interesting character to
> meet.
>
>> On Jul 8, 2017, at 8:04 AM, Bill Gagnier wrote:
>>
>> Shipping is actual cost $14 not $41.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm

Report message to a moderator

Previous Topic:	[GMCnet] Thanks, so far so good!
Next Topic:	[GMCnet] FMCA convention in Indy Are you going?

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Nov 07 04:09:53 CST 2024

Total time taken to generate the page: 0.00766 seconds