Home » Public Forums » GMCnet » Gas Tank Fill Leak
| Gas Tank Fill Leak [message #315614] |
Fri, 07 April 2017 19:30  |
A Hamilto
Messages: 4508
Registered: April 2011
Karma: 39
|
Senior Member |
|
|
Today we drained all but 12 gallons of the 5 year old gas and added some SeaFoam to prevent sticky valve problems, and 20 gallons of ethanol gas to absorb as much water as practical. We drained 10 gallons and added 20, less what leaked on the ground, which I guess was less than a gallon.
While adding the 20 gallons of gas from 5 gallon cans, after the first 10 gallons, we noticed A LOT of gas running onto the ground and it seemed to be coming from the junction of the fill tube to the front tank. It leaks while we are putting gas in, and stops shortly after we stop filling, but doesn't seem to loose all the that was added.
We tried funneling the gas in a way that it stayed in the center of the fill neck, and not into the vent part, with the same leakage.
Again, it doesn't seem to leak all the gas out that we put in. It leaks while we are filling, and stops a little while after we stop. We repeated that test a couple of times.
If it was actually leaking from a fill tube connection, wouldn't it keep leaking until all the gas we put in leaked out? I don't think it is doing that. More like it leaks before the gas from the rear tank (where it wants to go) equalizes with the gas in the front tank.
The level in the tanks is definitely higher than the fill line all the time, yet it doesn't leak all the time, only when gas is being added.
What could be causing it?
The prospective new owner is planning to replace all the rubber lines (fill, vent, engine, Onan, liquid/vapor separator and vent canister), but this is not giving him confidence that he can drive it to where that job can be done. This has the makings of a deal breaker, and I want to keep this "sale" on track.
Thanks in advance for suggestions.
|
|
|
|
| Re: [GMCnet] Gas Tank Fill Leak [message #315616 is a reply to message #315614] |
Fri, 07 April 2017 20:57  |
Kosier
Messages: 834
Registered: February 2008
Karma: 1
|
Senior Member |
|
|
Since it's only a temporary fix, I would take the hose off and go to the
nearest REAL parts store. If they don't have any proper gas hose,
look for the shortest radiator hose in that diameter. Cut a piece the same
length and put it on. Yes, it will deteriorate, but not for a
while and it will allow the new owner to get somewhere else and fix it
properly.
Gary Kosier
77PB w/500Cad
Newark, Ohio
--------------------------------------------------
From: "A."
Sent: Friday, April 07, 2017 8:31 PM
To:
Subject: [GMCnet] Gas Tank Fill Leak
> Today we drained all but 12 gallons of the 5 year old gas and added some
> SeaFoam to prevent sticky valve problems, and 20 gallons of ethanol gas to
> absorb as much water as practical. We drained 10 gallons and added 20,
> less what leaked on the ground, which I guess was less than a gallon.
>
> While adding the 20 gallons of gas from 5 gallon cans, after the first 10
> gallons, we noticed A LOT of gas running onto the ground and it seemed to
> be
> coming from the junction of the fill tube to the front tank. It leaks
> while we are putting gas in, and stops shortly after we stop filling, but
> doesn't seem to loose all the that was added.
>
> We tried funneling the gas in a way that it stayed in the center of the
> fill neck, and not into the vent part, with the same leakage.
>
> Again, it doesn't seem to leak all the gas out that we put in. It leaks
> while we are filling, and stops a little while after we stop. We repeated
> that
> test a couple of times.
>
> If it was actually leaking from a fill tube connection, wouldn't it keep
> leaking until all the gas we put in leaked out? I don't think it is doing
> that. More like it leaks before the gas from the rear tank (where it wants
> to go) equalizes with the gas in the front tank.
>
> The level in the tanks is definitely higher than the fill line all the
> time, yet it doesn't leak all the time, only when gas is being added.
>
> What could be causing it?
>
> The prospective new owner is planning to replace all the rubber lines
> (fill, vent, engine, Onan, liquid/vapor separator and vent canister), but
> this
> is not giving him confidence that he can drive it to where that job can be
> done. This has the makings of a deal breaker, and I want to keep this
> "sale" on track.
>
> Thanks in advance for suggestions.
> --
> 73 23' Sequoia 4 Sale
> 73 23' CanyonLands Parts Unit 4 Sale
> Upper Alabama
> "When I grow up I am going to be a curmudgeon."
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: Gas Tank Fill Leak [message #315617 is a reply to message #315614] |
Fri, 07 April 2017 21:18 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
If you need them, I have a full set of the three fill line hoses that I got from Jim K. 6 years ago. I planned to drop my tanks and replace them but haven't got around to doing it yet. I still plan to do it some day, but I could send these overnight or 2nd day if you need them in a rush. You could order replacement ones for me at your leisure.
Ken B.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
| Re: Gas Tank Fill Leak [message #315619 is a reply to message #315618] |
Fri, 07 April 2017 23:28 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
OK, then I will not go look for the ones that I have. I know that they are in my basement somewhere.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: Gas Tank Fill Leak [message #315635 is a reply to message #315618] |
Sat, 08 April 2017 09:36 |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
A,
Getting the fill line down and back up is not a big or a bad job. You do have to have the coach high enough to work under. I (in my unfortunate experience) found it much easy to deal with the fuel tanks with the fill plumbing out of the way.
You have a 73, so there is a rubber Ell at the rear tank. Take that out first. Then pull the long pipe to the T. There are three pieces of rubber there. The T is also not a bi-direction part. It is polar, look at it carefully. The big side goes forward.
All of this is a 15 minute job if the coach is high enough to work under and you have a helper to pass tools.
The last PITA is the rubber that couples to the actual fill pipe down leg. For that you want to peal out the wheel well liner. Then it is easy to loosen clamps and pull that and replace the kinked hose that makes that turn.
Best of luck
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
Goto Forum:
Current Time: Tue Nov 12 11:21:46 CST 2024
Total time taken to generate the page: 0.01012 seconds
|
GMCforum
Search
Help
Register
Login
Home
