Wtb: passenger side "door panel" [message #315473] |
Tue, 04 April 2017 18:55 |
Justin Brady
Messages: 769 Registered: April 2015 Location: Bell Buckle, TN
Karma: 11
|
Senior Member |
|
|
I am in need of a passenger side plastic dash panel (the one with the ash tray and cubby) the whole panel.
If anyone has a spare one sitting around or a parts coach with one let me know.
I'm in middle TN but willing to pay for shipping it.
I've got a perfectly good one, but after a botched vinyl attempt the contact cement just won't come off. No amount of solvent or elbow grease will get it off.
Justin Brady
http://www.thegmcrv.com/
1976 Palm Beach 455
|
|
|
|
Re: Wtb: passenger side "door panel" [message #315486 is a reply to message #315473] |
Tue, 04 April 2017 23:45 |
Adrien G.
Messages: 474 Registered: May 2008 Location: Burns Flat, OK 73624
Karma: 1
|
Senior Member |
|
|
Justin,
I feel your pain, I had 2 failed attempts.
I cleaned the glue with 3M #08984 General Purpose Adhesive Cleaner. It will not damage the part.
Work in small areas , pour some remover, let it soften the glue and paper towel it off.
May need to do it more then once.
Then get the only glue that works
DAP Weldwood Landau Top & Trim
HHR Solvent type UPC # 70798 00233 1 gl size
HHR Solvent type UPC # 70795 00095 5 gl size
High Heat Resistant Solvent Type (HHR) is what you need to look for, then buy a cheap pressure spray gun from HF to spay the glue.
Or pay to have it done, which in some cases, a few peaces, may be less expensive then the materials & tools to do it.
Adrien & Jenny Genesoto
75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild
Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
|
|
|
|
|
|
|
|
Re: Wtb: passenger side "door panel" [message #315555 is a reply to message #315473] |
Wed, 05 April 2017 22:10 |
bryhart
Messages: 90 Registered: July 2015 Location: Salem, OR
Karma: 0
|
Member |
|
|
Justin - I know you had mentioned that you were going to have the "door panels" professionally done. Is that who botched the job? What were the mistakes? I have mine out and I was thinking of taking mine to somebody. I would prefer to not make the same mistakes if they can be prevented.
1977 Palm Beach
[Updated on: Wed, 05 April 2017 22:11] Report message to a moderator
|
|
|
|