Photo request for interior rear wall [message #315366] |
Sun, 02 April 2017 20:29 |
|
GMC Jimmy
Messages: 199 Registered: September 2016 Location: Niagara, Ontario
Karma: 2
|
Senior Member |
|
|
Hello All, hope everyone had a nice weekend.
I am in the process of framing for my rear lounge and would like to tie the framing into the rear wall for support.
I have searched the photo archive and didn't see what I was looking for, do you have a photo of the rear wall with the aluminum structure exposed?
Ideally if you can provide the locations of and or distances between aluminum studs it would be a great help. I suppose I could use PL Premium and glue the wood framing to the wall but I would prefer the easy to undo method.
Thanks again for the help,
Regards,
Mike
[Updated on: Sun, 02 April 2017 20:32] Report message to a moderator
|
|
|
|
|
Re: [GMCnet] Photo request for interior rear wall [message #315370 is a reply to message #315369] |
Sun, 02 April 2017 21:12 |
Emery Stora
Messages: 959 Registered: January 2011
Karma: 4
|
Senior Member |
|
|
> On Apr 2, 2017, at 8:01 PM, Jerry Burt wrote:
>
> This should give you the info you need.
> http://www.bdub.net/GMCdrawings/
>
>
> GMC Jimmy wrote on Sun, 02 April 2017 18:29
>> Hello All, hope everyone had a nice weekend.
>>
>> I am in the process of framing for my rear lounge and would like to tie the framing into the rear wall for support.
>>
>> I have searched the photo archive and didn't see what I was looking for, do you have a photo of the rear wall with the aluminum structure
>> exposed?
>>
>> Ideally if you can provide the locations of and or distances between aluminum studs it would be a great help. I suppose I could use PL Premium and
>> glue the wood framing to the wall but I would prefer the easy to undo method.
>>
>> Thanks again for the help,
>> Regards,
>> Mike
>
>
> --
> Patti & Jerry Burt
> 73 Gmc 26' Canyon Lands -
None of those show the inside real wall that he wants. I’ll look to see if I have anything when I get home in a couple of days.
Emery Stora
77 Kingsley
Frederick, CO
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
|
Re: [GMCnet] Photo request for interior rear wall [message #315381 is a reply to message #315366] |
Mon, 03 April 2017 07:50 |
Jim Miller
Messages: 501 Registered: March 2008
Karma: 10
|
Senior Member |
|
|
On Apr 2, 2017, at 9:29 PM, Mike wrote:
> I am in the process of framing for my rear lounge and would like to tie the framing into the rear wall for support.
> I have searched the photo archive and didn't see what I was looking for, do you have a photo of the rear wall with the aluminum structure exposed?
As others have pointed out there is no aluminum framing in the rear cap. See my photo album for pictures; each photo can be clicked on to enlarge. I added wooden blocking for the table support and as a backer for the roof ladder mount.
http://www.jcmco.com/gallery/album25
—Jim
Jim Miller
1977 Eleganza
1977 Royale
Hamilton, OH
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Miller
1977 Eleganza II
1977 Royale
Hamilton, OH
|
|
|
|