Home » Public Forums » GMCnet » Wet Floor (Previous Owner strikes again)
| Wet Floor [message #313914] |
Tue, 28 February 2017 20:38  |
Palmerdad
Messages: 60
Registered: August 2016
Location: Traverse City
Karma: 0
|
Member |
|
|
This week as I continue to remodel the interior of our '76 Eleganza I found that neither the seats nor seatbelts had nuts on the underside of the bolts to actually hold them into the floor. Now as I ripped up the suspiciously lain luan I found much moisture, mildew, and mold. Thankfully the floor still seems solid and it seems to be drying well. But the question of course is where the moisture could have come from.
A few more details. We bought it this last September and it was used and sat out during some good rains in Sept and October before being put away in a barn where it has been for the last 4 months. I never saw nor felt moisture on the top of the sheet vinyl floor that po put down, nor did I see moisture coming in from the ceiling.
So, where might it be coming from?
Overhead? When I removed the ceiling I found evidence of a leak above that area on the underside of the ceiling boards. But again I never saw any evidence of water coming from the ceiling this Fall and the moisture under the Luan seemed fresh. (I have since patched that area.)
Couldn't be from the water system as I have yet to put any water in it.
Is it possible for water to somehow get in from underneath? It is right by one of the wheel wells.
-James Palmer, Traverse City, MI
1976 Eleganza
|
|
|
|
| Re: Wet Floor [message #313918 is a reply to message #313914] |
Tue, 28 February 2017 21:57  |
thorndike
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma: 0
|
Senior Member |
|
|
Palmerdad,
As you are aware, water can travel quite well. It is completely possible for a leak in one of the upper seams/windows/etc to run down the wall and collect under the floor. Do you see any sort of staining that might point to a direction of a source? I found evidence of water leaks on the floor beneath the front seam that separates the cockpit from the main body. Good luck!
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
|
|
|
|
| Re: Wet Floor [message #313919 is a reply to message #313918] |
Tue, 28 February 2017 22:31 |
Palmerdad
Messages: 60
Registered: August 2016
Location: Traverse City
Karma: 0
|
Member |
|
|
That's the strange part, I really don't. I'd sure like to find the source before putting new flooring in. I thought I read somewhere that water could come in from the wheel well if something had deteriorated... Of course I can't remember the exact issue or find the post...
-James Palmer, Traverse City, MI
1976 Eleganza
|
|
|
|
| Re: Wet Floor [message #313920 is a reply to message #313919] |
Wed, 01 March 2017 01:37 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
What area of the coach are you working on with the wet floor? Does the the water come in when parked or only when driving down the road?
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: Wet Floor [message #313934 is a reply to message #313920] |
Wed, 01 March 2017 12:10 |
Palmerdad
Messages: 60
Registered: August 2016
Location: Traverse City
Karma: 0
|
Member |
|
|
It's right by the driver side rear wheel well. The water must have come in last October and just been trapped under the old floor and ply sub floor the last 4 months (it was only damp but was starting to mildew/mold). but I can't say whether it came in whilst driving or sitting. The area is by the drivers side rear wheel well which was why I was thinking wheel well.
-James Palmer, Traverse City, MI
1976 Eleganza
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313936 is a reply to message #313934] |
Wed, 01 March 2017 12:34 |
Emery Stora
Messages: 959
Registered: January 2011
Karma: 4
|
Senior Member |
|
|
If you look into the wheel wells behind the bogie arms you will see the edge of the plywood floor. There is a seam there that sometimes has a leak. When driving in wet weather the tires will throw water into that crack and it will run onto the top of the floor and your carpet will get wet.
Use a polyurethane caulk where the plywood floor meets the bottom of the wheel well liners with some black polyurethane sealant.. If you look closely just above the plywood you will probably see a little crack. Seal the front , the wall opposite the tires and the back of the liner and it will likely fix the problem.
I used PL sealant that I bought at Home Depot. It comes in black and other colors. One tube says t is made for foundation or roof and flashing sealing and also a tube that says "Windows and Doors" and another tube that says concrete. They are the same thing even though they have different labels. This comes in a standard caulking gun tube. Loctite has now bought out PL so look for the Loctite PL. It comes in Door and Window (white) , Concrete (Grey) and Roof and Flashing (Black).
The black will look best in the wheel well.
I have had to do this a couple of times, a few years apart, as the seam reopened after a few years .
That same black sealant works well around windows and for roof leaks and it is paintable. If using it on a roof seam use masking tape on both sides of the seam, fill the seam and smooth it with your finger and pull off the masking tape while it is still uncured.
After a week or so you can spray some white (or ivory) colored paint on it. Acrylic spray can works well. The Krylon Antique white matches many of the GMC beige colors.
Emery Stora
77 Kingsley
Frederick, CO
> On Mar 1, 2017, at 11:10 AM, James Palmer wrote:
>
> It's right by the driver side rear wheel well. The water must have come in last October and just been trapped under the old floor and ply sub floor
> the last 4 months (it was only damp but was starting to mildew/mold). but I can't say whether it came in whilst driving or sitting. The area is by
> the drivers side rear wheel well which was why I was thinking wheel well.
> --
> -James Palmer, Traverse City, MI
> 1976 Eleganza
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313941 is a reply to message #313936] |
Wed, 01 March 2017 13:40 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Rather than the paint overcoat Emery suggests, I prefer to use spray can
undercoating; it seems to preserve the seal better for me -- but my flares
hide the area from the outside, so the color doesn't matter to me.
Ken H.
On Wed, Mar 1, 2017 at 1:34 PM, Emery Stora wrote:
> If you look into the wheel wells behind the bogie arms you will see the
> edge of the plywood floor. There is a seam there that sometimes has a
> leak. When driving in wet weather the tires will throw water into that
> crack and it will run onto the top of the floor and your carpet will get
> wet.
>
> Use a polyurethane caulk where the plywood floor meets the bottom of the
> wheel well liners with some black polyurethane sealant.. If you look
> closely just above the plywood you will probably see a little crack. Seal
> the front , the wall opposite the tires and the back of the liner and it
> will likely fix the problem.
>
> I used PL sealant that I bought at Home Depot. It comes in black and
> other colors. One tube says t is made for foundation or roof and flashing
> sealing and also a tube that says "Windows and Doors" and another tube that
> says concrete. They are the same thing even though they have different
> labels. This comes in a standard caulking gun tube. Loctite has now
> bought out PL so look for the Loctite PL. It comes in Door and Window
> (white) , Concrete (Grey) and Roof and Flashing (Black).
> The black will look best in the wheel well.
>
> I have had to do this a couple of times, a few years apart, as the seam
> reopened after a few years .
>
> That same black sealant works well around windows and for roof leaks and
> it is paintable. If using it on a roof seam use masking tape on both sides
> of the seam, fill the seam and smooth it with your finger and pull off the
> masking tape while it is still uncured.
> After a week or so you can spray some white (or ivory) colored paint on
> it. Acrylic spray can works well. The Krylon Antique white matches many
> of the GMC beige colors.
>
> Emery Stora
> 77 Kingsley
> Frederick, CO
>
>> On Mar 1, 2017, at 11:10 AM, James Palmer wrote:
>>
>> It's right by the driver side rear wheel well. The water must have
> come in last October and just been trapped under the old floor and ply sub
> floor
>> the last 4 months (it was only damp but was starting to mildew/mold).
> but I can't say whether it came in whilst driving or sitting. The area is
> by
>> the drivers side rear wheel well which was why I was thinking wheel well.
>> --
>> -James Palmer, Traverse City, MI
>> 1976 Eleganza
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313945 is a reply to message #313941] |
Wed, 01 March 2017 14:13 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
If it was wet after driving then the advice from Ken and Emery applies. To
add to that, my last coach had carpet stapled directly through the wheel
wells. I ended up having to coat them with fiberglass resin do the
hundereds of staple holes.
If it got wet from sitting then it is not likely your wheel wells but
something higher.
Sully
77 eleganza 2
Seattle
On Wed, Mar 1, 2017 at 11:42 AM Ken Henderson
wrote:
> Rather than the paint overcoat Emery suggests, I prefer to use spray can
> undercoating; it seems to preserve the seal better for me -- but my flares
> hide the area from the outside, so the color doesn't matter to me.
>
> Ken H.
>
> On Wed, Mar 1, 2017 at 1:34 PM, Emery Stora wrote:
>
>> If you look into the wheel wells behind the bogie arms you will see the
>> edge of the plywood floor. There is a seam there that sometimes has a
>> leak. When driving in wet weather the tires will throw water into that
>> crack and it will run onto the top of the floor and your carpet will get
>> wet.
>>
>> Use a polyurethane caulk where the plywood floor meets the bottom of the
>> wheel well liners with some black polyurethane sealant.. If you look
>> closely just above the plywood you will probably see a little crack.
> Seal
>> the front , the wall opposite the tires and the back of the liner and it
>> will likely fix the problem.
>>
>> I used PL sealant that I bought at Home Depot. It comes in black and
>> other colors. One tube says t is made for foundation or roof and
> flashing
>> sealing and also a tube that says "Windows and Doors" and another tube
> that
>> says concrete. They are the same thing even though they have different
>> labels. This comes in a standard caulking gun tube. Loctite has now
>> bought out PL so look for the Loctite PL. It comes in Door and Window
>> (white) , Concrete (Grey) and Roof and Flashing (Black).
>> The black will look best in the wheel well.
>>
>> I have had to do this a couple of times, a few years apart, as the seam
>> reopened after a few years .
>>
>> That same black sealant works well around windows and for roof leaks and
>> it is paintable. If using it on a roof seam use masking tape on both
> sides
>> of the seam, fill the seam and smooth it with your finger and pull off
> the
>> masking tape while it is still uncured.
>> After a week or so you can spray some white (or ivory) colored paint on
>> it. Acrylic spray can works well. The Krylon Antique white matches many
>> of the GMC beige colors.
>>
>> Emery Stora
>> 77 Kingsley
>> Frederick, CO
>>
>>> On Mar 1, 2017, at 11:10 AM, James Palmer wrote:
>>>
>>> It's right by the driver side rear wheel well. The water must have
>> come in last October and just been trapped under the old floor and ply
> sub
>> floor
>>> the last 4 months (it was only damp but was starting to mildew/mold).
>> but I can't say whether it came in whilst driving or sitting. The area
> is
>> by
>>> the drivers side rear wheel well which was why I was thinking wheel
> well.
>>> --
>>> -James Palmer, Traverse City, MI
>>> 1976 Eleganza
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313946 is a reply to message #313941] |
Wed, 01 March 2017 14:18 |
Emery Stora
Messages: 959
Registered: January 2011
Karma: 4
|
Senior Member |
|
|
I was not suggesting painting the sealant in the wheel area. That is why I suggested using the black polyurethane.
My reference to painting was when I discussed the use of the sealant on the roof.
Emery Stora
77 Kingsley
Frederick, CO
> On Mar 1, 2017, at 12:40 PM, Ken Henderson wrote:
>
> Rather than the paint overcoat Emery suggests, I prefer to use spray can
> undercoating; it seems to preserve the seal better for me -- but my flares
> hide the area from the outside, so the color doesn't matter to me.
>
> Ken H.
>
> On Wed, Mar 1, 2017 at 1:34 PM, Emery Stora wrote:
>
>> If you look into the wheel wells behind the bogie arms you will see the
>> edge of the plywood floor. There is a seam there that sometimes has a
>> leak. When driving in wet weather the tires will throw water into that
>> crack and it will run onto the top of the floor and your carpet will get
>> wet.
>>
>> Use a polyurethane caulk where the plywood floor meets the bottom of the
>> wheel well liners with some black polyurethane sealant.. If you look
>> closely just above the plywood you will probably see a little crack. Seal
>> the front , the wall opposite the tires and the back of the liner and it
>> will likely fix the problem.
>>
>> I used PL sealant that I bought at Home Depot. It comes in black and
>> other colors. One tube says t is made for foundation or roof and flashing
>> sealing and also a tube that says "Windows and Doors" and another tube that
>> says concrete. They are the same thing even though they have different
>> labels. This comes in a standard caulking gun tube. Loctite has now
>> bought out PL so look for the Loctite PL. It comes in Door and Window
>> (white) , Concrete (Grey) and Roof and Flashing (Black).
>> The black will look best in the wheel well.
>>
>> I have had to do this a couple of times, a few years apart, as the seam
>> reopened after a few years .
>>
>> That same black sealant works well around windows and for roof leaks and
>> it is paintable. If using it on a roof seam use masking tape on both sides
>> of the seam, fill the seam and smooth it with your finger and pull off the
>> masking tape while it is still uncured.
>> After a week or so you can spray some white (or ivory) colored paint on
>> it. Acrylic spray can works well. The Krylon Antique white matches many
>> of the GMC beige colors.
>>
>> Emery Stora
>> 77 Kingsley
>> Frederick, CO
>>
>>> On Mar 1, 2017, at 11:10 AM, James Palmer wrote:
>>>
>>> It's right by the driver side rear wheel well. The water must have
>> come in last October and just been trapped under the old floor and ply sub
>> floor
>>> the last 4 months (it was only damp but was starting to mildew/mold).
>> but I can't say whether it came in whilst driving or sitting. The area is
>> by
>>> the drivers side rear wheel well which was why I was thinking wheel well.
>>> --
>>> -James Palmer, Traverse City, MI
>>> 1976 Eleganza
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313948 is a reply to message #313946] |
Wed, 01 March 2017 14:33 |
tphipps
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
Flex Seal, as seen on TV, will also do the trick. Available at your nearest big box store, black, white, clear, and tan. Colors may not all be in stock at one time. You can get it as a spray can, small pressurized tube, or paint on. Material is paintable.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313958 is a reply to message #313948] |
Wed, 01 March 2017 15:59 |
Keith V
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
pay attention to any cracks in anything. I chased leaks for years in my AC covers that turned out to be a couple of small cracks.
I think the crack sucks the water in by capiliary action. it's amazingly effective
________________________________
From: Gmclist on behalf of Thomas Phipps
Sent: Wednesday, March 1, 2017 2:33:20 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Wet Floor
Flex Seal, as seen on TV, will also do the trick. Available at your nearest big box store, black, white, clear, and tan. Colors may not all be in
stock at one time. You can get it as a spray can, small pressurized tube, or paint on. Material is paintable.
Tom, MS II
--
1975 GMC Avion
KA4CSG
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313963 is a reply to message #313958] |
Wed, 01 March 2017 18:09 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Cracks in the bottom ac tray will leak badly to the interior when the ac is
operating. The tray works as a gutter to carry away the condensation
created sduring operation.
Sully
77 eleganza 2
Seattle
On Wed, Mar 1, 2017 at 2:00 PM Keith V wrote:
> pay attention to any cracks in anything. I chased leaks for years in my AC
> covers that turned out to be a couple of small cracks.
>
> I think the crack sucks the water in by capiliary action. it's amazingly
> effective
>
> ________________________________
> From: Gmclist on behalf of Thomas
> Phipps
> Sent: Wednesday, March 1, 2017 2:33:20 PM
> To: gmclist@list.gmcnet.org
> Subject: Re: [GMCnet] Wet Floor
>
> Flex Seal, as seen on TV, will also do the trick. Available at your
> nearest big box store, black, white, clear, and tan. Colors may not all be
> in
> stock at one time. You can get it as a spray can, small pressurized tube,
> or paint on. Material is paintable.
> Tom, MS II
> --
> 1975 GMC Avion
> KA4CSG
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
| Re: [GMCnet] Wet Floor [message #313967 is a reply to message #313948] |
Thu, 02 March 2017 00:11 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
tphipps wrote on Wed, 01 March 2017 14:33Flex Seal, as seen on TV, will also do the trick. Available at your nearest big box store, black, white, clear, and tan. Colors may not all be in stock at one time. You can get it as a spray can, small pressurized tube, or paint on. Material is paintable.
Tom, MS II
Flex seal spray as recommended Tom works well. There are other brands of the same thing. I used the Rustoleum brand of the stuff. (available at Menards.)
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: Wet Floor [message #313969 is a reply to message #313934] |
Thu, 02 March 2017 00:40 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Leaks in that location can be caused by a drain tube blocked in the access panel where the power cord is located. If you open the power cord access door from the outside and remove the cord completely you will see that in the bottom part of that storage area is a plastic tray or tub. When it rains water sometimes collects there. There is a small drain hole in the bottom of the tub that connects to a 1/4" id tube that runs through a hole in the fiberglass and also the fender liner. Over time that tube can get blocked and the tub will over flow collected rain water into the area that you are describing.
If you want to see the other end of that tube, look at the fender liner above and in front of the middle wheel on the left side of the coach.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: Wet Floor [message #313970 is a reply to message #313969] |
Thu, 02 March 2017 00:53 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Ken Burton wrote on Thu, 02 March 2017 00:40Leaks in that location can be caused by a drain tube blocked in the access panel where the power cord is located. If you open the power cord access door from the outside and remove the cord completely you will see that in the bottom part of that storage area is a plastic tray or tub. When it rains water sometimes collects there. There is a small drain hole in the bottom of the tub that connects to a 1/4" id tube that runs through a hole in the fiberglass and also the fender liner. Over time that tube can get blocked and the tub will over flow collected rain water into the area that you are describing.
If you want to see the other end of that tube, look at the fender liner above and in front of the middle wheel on the left side of the coach.
Also leaks in that area can be caused if the hose is disconnected from the bottom of the tub. Do NOT pull the hose out unless it is absolutely necessary as it is a real problem to get it back in there again.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: Wet Floor [message #313971 is a reply to message #313914] |
Thu, 02 March 2017 08:08 |
Palmerdad
Messages: 60
Registered: August 2016
Location: Traverse City
Karma: 0
|
Member |
|
|
I will definitely grab a can of flex seal and go after the wheel well. Even if that isn't the problem it sounds like it should be done. (Hopefully that will solve the problem though too!) Thanks again guys!
-James Palmer, Traverse City, MI
1976 Eleganza
|
|
|
|
|
|
| Re: Wet Floor [message #314001 is a reply to message #313971] |
Thu, 02 March 2017 23:34 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
IF you have not read my previous posting, please do so. Also for a quick check open the door where the power cord goes and look for an evidence of accumulated water in that area. It will only take you a couple of minutes.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
Goto Forum:
Current Time: Fri Nov 15 12:23:28 CST 2024
Total time taken to generate the page: 0.00817 seconds
|
GMCforum
Search
Help
Register
Login
Home
