GMCforum: GMCnet » Looking for dash tags/labels

Home » Public Forums » GMCnet » Looking for dash tags/labels

Show: Today's Messages :: Polls :: Message Navigator

Looking for dash tags/labels [message #313346]

Thu, 16 February 2017 18:30

pjburt

Messages: 436
Registered: February 2016
Location: Fresno, California

Karma: 1

Senior Member

Are these tags/labels available from someone in the community or were they a one-off by a PO?
They seem to be glued onto the original inserts and are not lit. I am missing the headlight and Bat Boost tags.

http://www.gmcmhphotos.com/photos/misc/p62159-dash-tags.html

Thanks.

Jerry Burt Fresno, CA.
73 Gmc 26' Canyon Lands
Members: FMCA - GMCMI - GMCWS
A truly happy person is one who can enjoy the scenery on a detour.

[Updated on: Thu, 16 February 2017 18:31]

Report message to a moderator

Re: [GMCnet] Looking for dash tags/labels [message #313350 is a reply to message #313346]

Thu, 16 February 2017 18:55

bdub

Messages: 1578
Registered: February 2004
Location: Central Texas

Karma: 5

Senior Member

Try these

http://www.gmcmotorhomemarketplace.com/novak/

-----Original Message-----
From: Gmclist On Behalf Of Jerry Burt
Sent: Thursday, February 16, 2017 6:30 PM

Are these tags/labels available from someone in the community or were they a
one-off by a PO?
They seem to be glued onto the original inserts and are not lit. I am missing
the headlight and Bat Boost tags.

http://www.gmcmhphotos.com/photos/misc/p62159-dash-tags.html

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm

Report message to a moderator

Re: [GMCnet] Looking for dash tags/labels [message #313355 is a reply to message #313350]

Thu, 16 February 2017 19:44

pjburt

Messages: 436
Registered: February 2016
Location: Fresno, California

Karma: 1

Senior Member

Thanks Billy. What I need is 2 or 3 of the OEM black plastic frames. I don't need them to be lighted. I intend to redo the dash eventually so I just want to temporarily fill the holes I have missing. I can always relabel them as needed.

bdub wrote on Thu, 16 February 2017 16:55

Try these

http://www.gmcmotorhomemarketplace.com/novak/

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jerry Burt Fresno, CA.
73 Gmc 26' Canyon Lands
Members: FMCA - GMCMI - GMCWS
A truly happy person is one who can enjoy the scenery on a detour.

Report message to a moderator

Re: [GMCnet] Looking for dash tags/labels [message #313360 is a reply to message #313355]

Thu, 16 February 2017 21:33

tphipps

Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL

Karma: 9

Senior Member

Call out the 3D printers. Another great low production rate reproduction idea.
Very nice labels can be made with the Brother P-Touch label maker.
Tom, MS II

2012 Phoenix Cruiser model 2552 KA4CSG

Report message to a moderator

Re: [GMCnet] Looking for dash tags/labels [message #313362 is a reply to message #313360]

Thu, 16 February 2017 22:03

pjburt

Messages: 436
Registered: February 2016
Location: Fresno, California

Karma: 1

Senior Member

Hmmm... Thanks. May be a good reason to invest in a 3D printer and some software.

tphipps wrote on Thu, 16 February 2017 19:33

Call out the 3D printers. Another great low production rate reproduction idea.
Very nice labels can be made with the Brother P-Touch label maker.
Tom, MS II

Jerry Burt Fresno, CA.
73 Gmc 26' Canyon Lands
Members: FMCA - GMCMI - GMCWS
A truly happy person is one who can enjoy the scenery on a detour.

Report message to a moderator

Re: [GMCnet] Looking for dash tags/labels [message #313374 is a reply to message #313360]

Fri, 17 February 2017 08:14

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

tphipps wrote on Thu, 16 February 2017 22:33

Call out the 3D printers. Another great low production rate reproduction idea.
Very nice labels can be made with the Brother P-Touch label maker.
Tom, MS II

And,

If you have one of the Brother labelers that can talk to a computer (USB), you can take black letter on white tape and print it reverse to get translucent letters on a black background.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] Looking for dash tags/labels [message #313375 is a reply to message #313360]

Fri, 17 February 2017 08:33

Terry Taylor

Messages: 113
Registered: October 2004
Location: San Lorenzo, CA

Karma: 0

Senior Member

I started working on designing those bezels once before, I will try to get back on it soon.

The HARD part is the little metal clips that hold the bezels and fiber optic cable in place,

My original thought was to design a replacement with an LED inside vice the fiber optic.

On 2/16/2017 7:33 PM, Thomas Phipps wrote:
> Call out the 3D printers. Another great low production rate reproduction idea.
> Very nice labels can be made with the Brother P-Touch label maker.
> Tom, MS II

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Looking for dash tags/labels [message #313377 is a reply to message #313374]

Fri, 17 February 2017 09:26

lqqkatjon

Messages: 2324
Registered: October 2010
Location: St. Cloud, MN

Karma: 5

Senior Member

If you need labels off a Brother label maker. send me an email, I do have one, and it actually talks to my Laptop via wireless. I am no master at using it, but if it can do what you need, I can give it a try.

it is one of the edge models:

http://www.brother-usa.com/mobile/lp/ptedge/ptedge_models.aspx

Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

Report message to a moderator

Re: Looking for dash tags/labels [message #313382 is a reply to message #313346]

Fri, 17 February 2017 11:00

pjburt

Messages: 436
Registered: February 2016
Location: Fresno, California

Karma: 1

Senior Member

Thanks all. I just want some bezels to temporarily cleanup the dash until I rebuild the entire dash. The existing labels are engraved plastic glued to the bezels. I didn't know if they were available somewhere or done by the PO.
I'm just trying to cleanup a PO redo until I can do my own. My plan is to convert to electric wipers on the column, full gauges, different heating/ac controls, etc. So, the labels and lighting won't be needed.

Jerry Burt Fresno, CA.
73 Gmc 26' Canyon Lands
Members: FMCA - GMCMI - GMCWS
A truly happy person is one who can enjoy the scenery on a detour.

Report message to a moderator

Previous Topic:	[GMCnet] NEW LISTING! \| 1976 Royale - Rear Bath
Next Topic:	Re: [GMCnet] Looking for dash tags/lables

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 06 02:33:43 CST 2024

Total time taken to generate the page: 0.01751 seconds