| Bottom Door Hinge [message #313024] |
Fri, 10 February 2017 22:45  |
davidlive
Messages: 143
Registered: November 2011
Location: Simi valley, Southern Cal...
Karma: -1
|
Senior Member |
|
|
I need to do a lower hinge repair on my 1978 coach i recently got, and the bracket part that held it is complely broke out, does anyone have the dimensions where to drill the holes for the bolts to go though the other side, (otherwise i'll just line up the hinge to the wear marks and use that)
Thanks David
78 Royal #749
74 #136
Oversteer is when you hit the wall with the rear of the car, understeer is when you hit the wall with the front of the car. Hp is how fast you hit the wall, and torque is how far you take the wall with you when you hit it.
|
|
|
|
|
|
| Re: Bottom Door Hinge [message #313039 is a reply to message #313024] |
Sat, 11 February 2017 12:48  |
Adrien G.
Messages: 474
Registered: May 2008
Location: Burns Flat, OK 73624
Karma: 1
|
Senior Member |
|
|
David,
I read a measurement from center of top hinge lower bolt to center of top bolt on lower hinge
of 38-5/8 inches.
Between hinges is 37-3/8 inches.
PO damaged the lower hinge on my coach, but not that severely. Just deformed.
Good luck on the repair.
Adrien & Jenny Genesoto
75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild
Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
