| SEMNO GMC Lunch reminder Saturday (again) [message #308924] |
Mon, 17 October 2016 18:38  |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Southeast Michigan and Northwest Ohio GMC Lunch Bunch.
1:00PM 22 October 2016
The first after summer event.
And the last annoying reminder.
We are going back to the:
All American Buffet
13753 Eureka Road (in the Southgate Shopping Center)
Southgate, MI 48195
Saturday Earlybird until 2:30 9.99$ (Seniors 9.25)
We are planning to bring the coach, but there is no requirement.
There is LOTS of room to park.
This is not a club event and no membership is required.
You don't even have to currently own a TZE, but we expect you to know what it is.
Hope to see you there.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
| Re: SEMNO GMC Lunch reminder Saturday (again) [message #309024 is a reply to message #308924] |
Tue, 18 October 2016 20:56  |
kingd
Messages: 592
Registered: June 2004
Karma: 2
|
Senior Member |
|
|
Matt, I'm going to try to make it to the lunch coming from Toronto.
I don't know if I'll ever have a GMCMH but I certainly would like
to have one. Hope to see you Saturday.
DAVE KING
DAVE KING
lurker, wannabe
Toronto, Ontario, Canada
|
|
|
|
| Re: SEMNO GMC Lunch reminder Saturday (again) [message #309037 is a reply to message #309024] |
Wed, 19 October 2016 08:03 |
|
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
kingd wrote on Tue, 18 October 2016 21:56Matt, I'm going to try to make it to the lunch coming from Toronto.
I don't know if I'll ever have a GMCMH but I certainly would like to have one. Hope to see you Saturday.
DAVE KING
Dave,
As said, all you need to have is an idea what a TZE is.
You will be very welcome, but as an actual question and on offense intended, but...
Are You Nuts???
It is a 5 Hour drive not including the time in customs both ways.
When we go to the cousins' in London, the worst part of the trip is US customs.
We will be glad to see you if you do show up.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
|
|
| Re: SEMNO GMC Lunch reminder Saturday (again) [message #309212 is a reply to message #308924] |
Sun, 23 October 2016 11:37 |
kingd
Messages: 592
Registered: June 2004
Karma: 2
|
Senior Member |
|
|
So the lunch did happen. Someone help me with the count here. I believe
11 males and 5 ? ladies and 2 coaches
Ken Burton was going to come but took ill. Can someone find out how Ken is
doing and maybe post here
I think a good time was had by all.
I enjoyed putting faces to the names I only new from here.
Any comments from anyone else ?
Thanks to Matt for organizing this.
DAVE KING
lurker, wannabe
Toronto, Ontario, Canada
|
|
|
|
|
|
| Re: SEMNO GMC Lunch reminder Saturday (again) [message #309239 is a reply to message #309223] |
Sun, 23 October 2016 19:55 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I'm OK.
I was just a little under the weather. After driving a little over 100 miles, I gave Mike's seats to Paul Bartz in Kalamazoo, turned around, and went back home.
.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: SEMNO GMC Lunch reminder Saturday (again) [message #309296 is a reply to message #308924] |
Mon, 24 October 2016 12:10 |
kingd
Messages: 592
Registered: June 2004
Karma: 2
|
Senior Member |
|
|
Ken, glad to hear you're OK
Matt, what I know from our conversation. Use the steel shim head gasket if
I can find one. As the engine is a"type" 3 it doesn't use a standard
440 gasket. If I can't find a steel shim type, any suggestions?
BTW, I don't have skype.
DAVE KING
lurker, wannabe
Toronto, Ontario, Canada
|
|
|
|
| Re: SEMNO GMC Lunch reminder Saturday (again) [message #309298 is a reply to message #309296] |
Mon, 24 October 2016 12:27 |
|
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
kingd wrote on Mon, 24 October 2016 13:10Ken, glad to hear you're OK
Matt, what I know from our conversation. Use the steel shim head gasket if I can find one. As the engine is a"type" 3 it doesn't use a standard
440 gasket. If I can't find a steel shim type, any suggestions?
BTW, I don't have skype.
Dave, My antique McCord book is out in my barn. (It was new when I got it.)
When I can get out there, I will drag it back in.
Hit me back at <matt[numbers seven three two three]tze at gmail dot com> so we can take this off line.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
