| Wheel Well Liner Nut Plates [message #308555] |
Tue, 11 October 2016 08:02  |
Jon payne
Messages: 495
Registered: May 2008
Karma: 1
|
Senior Member |
|
|
Hi All,
I have been looking, without success, for the correct size for the nut plates that slip on to the wheel well liners. I have checked the hardware stores in my area and the ones they carry typically have been to big and don't fit right. Mcmaster Carr has a good selection too but wondering if anyone knows the ones to get that fit correctly. I know, should be straight forward piece to get but I have been having a hard to finding the right ones.
Anyhelp is greatly appreciated!
Thanks,
Jon
Jon Payne
76 Palm Beach
Westfield,IN
|
|
|
|
| Re: Wheel Well Liner Nut Plates [message #308566 is a reply to message #308555] |
Tue, 11 October 2016 10:23  |
77Royale
Messages: 461
Registered: June 2014
Location: Mid Michigan
Karma: 6
|
Senior Member |
|
|
I took a set up to my local ACE hardware. Had a handful of replacements in a few minutes there. Key is going to a real hardware store.
77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy.
Mid Michigan
|
|
|
|
| Re: [GMCnet] Wheel Well Liner Nut Plates [message #308580 is a reply to message #308566] |
Tue, 11 October 2016 14:37 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Napa also has them.
On Tue, Oct 11, 2016 at 9:23 AM, Wayne Rogewski wrote:
> I took a set up to my local ACE hardware. Had a handful of replacements
> in a few minutes there. Key is going to a real hardware store.
> --
> 77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson
> carb and dizzy.
> Mid Michigan
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: Wheel Well Liner Nut Plates [message #308582 is a reply to message #308555] |
Tue, 11 October 2016 16:10 |
jimtze
Messages: 92
Registered: June 2011
Location: Victoria, BC
Karma: 1
|
Member |
|
|
I was able to get the exact product from my local auto parts supplier. O'Reilly's or any of the others should be able to access. The correct part is:
U Type Nuts
16480 (9433159)
#14 screw, panel
Range .125 - .250
Center Hole to Edge: 11/32 in.
Made by: Auto-Vehicle Parts Co.
Cold Spring, KY 41076
Jim Bratvold
Victoria, BC
76 Eleganza ll
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
