GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Microlevel Design credit
Microlevel Design credit [message #308472] Sun, 09 October 2016 20:04 Go to next message
Keith V is currently offline  Keith V   United States
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
Senior Member
I really need to give credit to a guy that really made an impact on getting this thing created and to where it is now.
He was an immense help and did a fantastic job complaining very little Smile
I'm not sure where I would be without him.
He did the electrical design, schematic design and PCB layout

Say Hi to Dave Mathis!


Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
Re: [GMCnet] Microlevel Design credit [message #308474 is a reply to message #308472] Sun, 09 October 2016 22:05 Go to previous messageGo to next message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
Senior Member
Congratulations, Dave. What model GMC do you have? :-)

Ken H.

On Sun, Oct 9, 2016 at 9:04 PM, Keith V wrote:

> I really need to give credit to a guy that really made an impact on
> getting this thing created and to where it is now.
> He was an immense help and did a fantastic job complaining very little :)
> I'm not sure where I would be without him.
> He did the electrical design, schematic design and PCB layout
>
> Say Hi to Dave Mathis!
> --
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
Re: Microlevel Design credit [message #308493 is a reply to message #308472] Mon, 10 October 2016 10:38 Go to previous messageGo to next message
Dave Mathis is currently offline  Dave Mathis   United States
Messages: 5
Registered: November 2012
Location: San Jose, CA
Karma: 0
Junior Member
We have a 23' 76 Birchaven rear bath.

It does not get out as much as I would like..
Maybe I spend too much time on electronics Smile

This has been a fun project. While everyone has ideas for projects,
including me, Keith was the one that pushed this forward and has
done the vast majority of the work.
Now I have to get one installed in our coach ...

Dave


Dave AG6NV 1976 Birchaven 23' San Jose, CA
Re: [GMCnet] Microlevel Design credit [message #308510 is a reply to message #308493] Mon, 10 October 2016 14:58 Go to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
Senior Member
Dave,

Do "get it out more" -- attend rallies. There are more than a few GMCers
with electronics backgrounds/interests for you to talk to. My own MSEE and
early computer store ownership would let me at least understand a little of
what you might say. I must admit, though, that I recently gave most of my
electronics test equipment to my grandsons, hoping to increase their
interest in fundamentals rather than just software. :-)

Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI & EBL,
Manny Brakes & 1-Ton, etc., etc., etc.
www.gmcwipersetc.com

On Mon, Oct 10, 2016 at 11:38 AM, David Mathis wrote:

> We have a 23' 76 Birchaven rear bath.
>
> It does not get out as much as I would like..
> Maybe I spend too much time on electronics :)
>
> This has been a fun project. While everyone has ideas for projects,
> including me, Keith was the one that pushed this forward and has
> done the vast majority of the work.
> Now I have to get one installed in our coach ...
>
> Dave
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
Previous Topic: Finally running!
Next Topic: Alcoa center caps & lug nut covers for sale. SOLD
Goto Forum:
  


Current Time: Wed Nov 06 23:33:26 CST 2024

Total time taken to generate the page: 0.01017 seconds