GMCforum: GMCnet » Body mounts

Home » Public Forums » GMCnet » Body mounts (front and rear - the round ones)

Show: Today's Messages :: Polls :: Message Navigator

Body mounts [message #306463]

Sat, 03 September 2016 16:34

jimtze

Messages: 92
Registered: June 2011
Location: Victoria, BC

Karma: 1

Member

I am in the middle of replacing the body pads. Have the rectangular ones at the front and rear out and in. The middle ones still to go. My concern is that the forward bushing mounts seem to not line up with the hole in the body support. It looks to be too far to the rear by just enough to prevent the bolts from going through. Has anyone had problems with this and what was the solution?

I did note that you have to ensure the ground cable does not escape from the right front mount bracket.

Thanks

Jim Bratvold Victoria, BC 76 Eleganza ll

Report message to a moderator

Previous Topic:	Fantastic warranty
Next Topic:	[GMCnet] UPDATE - Oman troubleshooting and testing...

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 06 04:32:41 CST 2024

Total time taken to generate the page: 0.02134 seconds