EV4010 [message #303365] |
Sun, 10 July 2016 12:05 |
|
Husker92592
Messages: 137 Registered: August 2013 Location: Temecula ca
Karma: -4
|
Senior Member |
|
|
Does anyone have the dimensions or correct layout for installing this gen set? I see photos but nothing to say this is the original plate cut down or what have you.
Thanks
1974 GMC Sequoia 26'
|
|
|
|
|
|
|
|
|
Re: [GMCnet] EV4010 [message #303422 is a reply to message #303421] |
Mon, 11 July 2016 09:27 |
tphipps
Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
The templates for the ev4010 and the ev6010 have enough differences that make them non interchangible. Get the right one, dummy it in cheap material (foam) and see how it fits inside the genset compartment. Remember that Honda recommends nothing to be placed in front of the cooling fan.
I was able to place mine about an inch further from the back and an inch further from the left side for additional air flow. Honda airflow is directed across the genset and exhausts out the bottom of the genset.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|