Fuel Filler Tube Hoses [message #301054] |
Tue, 24 May 2016 10:39 |
Who_dun_it
Messages: 176 Registered: April 2007 Location: Thousand Oaks, CA
Karma: 1
|
Senior Member |
|
|
Hi All I am in the process of changing all the fuel system hoses and have found that the hose connecting the filler tube tee to the front tank is not available. The filler tube tee is 1-1/8" and the tank inlet is 1-3/8". I am looking for suggestions for making that connection.
Thank you
Les
T.O. CA
|
|
|
|
|
Re: Fuel Filler Tube Hoses [message #301058 is a reply to message #301054] |
Tue, 24 May 2016 13:38 |
GMC Cruse
Messages: 606 Registered: June 2009 Location: SE Michigan
Karma: 3
|
Senior Member |
|
|
Who_dun_it wrote on Tue, 24 May 2016 11:39Hi All I am in the process of changing all the fuel system hoses and have found that the hose connecting the filler tube tee to the front tank is not available. The filler tube tee is 1-1/8" and the tank inlet is 1-3/8". I am looking for suggestions for making that connection.
Thank you
Les
T.O. CA
I Googled "1-3/8 fuel hose" a few places have it but it's expensive. Filler Neck Supply has it for $1.50 per inch. Green Line has type 2 hardwall for $8.88 per foot.
Mike K.
'75 PB
Southeast Michigan
[Updated on: Tue, 24 May 2016 13:43] Report message to a moderator
|
|
|
|
|
|
|
|
Re: Fuel Filler Tube Hoses [message #301079 is a reply to message #301077] |
Tue, 24 May 2016 21:06 |
PigPen4x4
Messages: 61 Registered: March 2014 Location: Chattanooga Tn
Karma: 1
|
Member |
|
|
I got them from Cinnabar for my '75.
I am re-thinking the filler tube though,
'cause there is a lot, a LOT of rust in it.
Christopher Brewer
Chattanooga Tn
Well, no longer an owner.
|
|
|
|
|
Re: [GMCnet] Fuel Filler Tube Hoses [message #301362 is a reply to message #301359] |
Wed, 01 June 2016 11:33 |
PigPen4x4
Messages: 61 Registered: March 2014 Location: Chattanooga Tn
Karma: 1
|
Member |
|
|
Hmm, it's intersting you have a diffrent set up.
I am doing this too, and on the front tank the straight hose
is the same dia.
Least it seems to be, I tried the hose both
ways to be sure I had it right.
I hope you find a solution...
PP4x4
Christopher Brewer
Chattanooga Tn
Well, no longer an owner.
|
|
|
Re: [GMCnet] Fuel Filler Tube Hoses [message #301396 is a reply to message #301359] |
Wed, 01 June 2016 19:45 |
|
Matt Colie
Messages: 8547 Registered: March 2007 Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
[quote title=Who_dun_it wrote on Wed, 01 June 2016 11:10]Who_dun_it wrote on Tue, 24 May 2016 18:36James Hupy wrote on Tue, 24 May 2016 12:01That hose is a molded "T" . GM made it. Check with Cinnabar if Applied GMC does not have them. Call on their 800 line. It is a free call if that is what deters you from dialing the phone.
Jim Hupy
My coach has a brass tee. I did call Cinnabar and it appears that they have the hose needed. I will know in a few days when it gets here.
Thanks
Les
It turns out that Cinnabar does not have the hose that is needed.
Now I am back to searching for methods of making the connection between the 1-3/8" tank inlet and the 1-1/8" tee.
Les
Les,
I am not the most experienced here, but I have had more than a few coaches tanks down and I have never seen a brass T, I think I saw a rubber T on a very late 78.
I do have two suggestions:
Get a fuel fill from a parts coach and use that, or
Get a T made out of small exhaust tubing to join up with the sizes you have.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
Re: [GMCnet] Fuel Filler Tube Hoses [message #301424 is a reply to message #301362] |
Thu, 02 June 2016 00:43 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
The 73 has lot of parts that was put together only or that year.
Our guys hate working on that year.
On Wed, Jun 1, 2016 at 9:33 AM, Christopher Brewer
wrote:
> Hmm, it's intersting you have a diffrent set up.
> I am doing this too, and on the front tank the straight hose
> is the same dia.
> Least it seems to be, I tried the hose both
> ways to be sure I had it right.
>
> I hope you find a solution...
> PP4x4
> --
> Christopher Brewer
> Chattanooga Tn
> 1975 Palm Beach
> Still mostly original
> EV-6010 Norcold 962 Sully's Wireless Air Mach 15k
> Gettin better, $1 at a time...
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|