Home » Public Forums » GMCnet » Oil Filter Mount Thanks Jim K
| Oil Filter Mount Thanks Jim K [message #295912] |
Sun, 21 February 2016 18:02  |
George Zhookoff
Messages: 398
Registered: December 2004
Location: Snellville, GA
Karma: 6
|
Senior Member |
|
|
I'm headed to the Atlanta NASCAR race next week. Figured I'd change the oil, take sample, replace gasket for the adapter. (Thanks Rob M). Pulled up the GMC Photo album to glean any hints. But per the warning on the photo site I cracked the oil filter mount. Sunday afternoon now what? I called Jim K. Yep he answered the phone. Part to be shipped ASAP first thing Monday morning.
Folks when you need a part for the GMC go to Jim K.
George " why waste time" Zhookoff
78 EL II
Atlanta
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295922 is a reply to message #295912] |
Sun, 21 February 2016 18:38  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
George,
You might have saved a few miles by calling me. There's at least one in
the L/S container. :-)
Ken H.
On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff <
George.Zhookoff@haskell.com> wrote:
> I'm headed to the Atlanta NASCAR race next week. Figured I'd change the
> oil, take sample, replace gasket for the adapter. (Thanks Rob M). Pulled
> up
> the GMC Photo album to glean any hints. But per the warning on the photo
> site I cracked the oil filter mount. Sunday afternoon now what? I called
> Jim K. Yep he answered the phone. Part to be shipped ASAP first thing
> Monday morning.
>
> Folks when you need a part for the GMC go to Jim K.
>
> George " why waste time" Zhookoff
> 78 EL II
> Atlanta
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295932 is a reply to message #295922] |
Sun, 21 February 2016 20:23 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I can cancel the order.
On Sun, Feb 21, 2016 at 4:38 PM, Ken Henderson
wrote:
> George,
>
> You might have saved a few miles by calling me. There's at least one in
> the L/S container. :-)
>
> Ken H.
>
>
> On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff George.Zhookoff@haskell.com> wrote:
>
>> I'm headed to the Atlanta NASCAR race next week. Figured I'd change the
>> oil, take sample, replace gasket for the adapter. (Thanks Rob M).
> Pulled
>> up
>> the GMC Photo album to glean any hints. But per the warning on the photo
>> site I cracked the oil filter mount. Sunday afternoon now what? I
> called
>> Jim K. Yep he answered the phone. Part to be shipped ASAP first thing
>> Monday morning.
>>
>> Folks when you need a part for the GMC go to Jim K.
>>
>> George " why waste time" Zhookoff
>> 78 EL II
>> Atlanta
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295933 is a reply to message #295922] |
Sun, 21 February 2016 20:34 |
George Zhookoff
Messages: 398
Registered: December 2004
Location: Snellville, GA
Karma: 6
|
Senior Member |
|
|
Ken
Thanks for the thought!
George Zhookoff
> On Feb 21, 2016, at 7:40 PM, "Ken Henderson" wrote:
>
> George,
>
> You might have saved a few miles by calling me. There's at least one in
> the L/S container. :-)
>
> Ken H.
>
>
> On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff George.Zhookoff@haskell.com> wrote:
>
>> I'm headed to the Atlanta NASCAR race next week. Figured I'd change the
>> oil, take sample, replace gasket for the adapter. (Thanks Rob M). Pulled
>> up
>> the GMC Photo album to glean any hints. But per the warning on the photo
>> site I cracked the oil filter mount. Sunday afternoon now what? I called
>> Jim K. Yep he answered the phone. Part to be shipped ASAP first thing
>> Monday morning.
>>
>> Folks when you need a part for the GMC go to Jim K.
>>
>> George " why waste time" Zhookoff
>> 78 EL II
>> Atlanta
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295944 is a reply to message #295933] |
Sun, 21 February 2016 23:10 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Ken,
Why don't you do me a favor and send him the mount and the flat gasket as I
have many others to handle.
I'm sure Nick and Gary have plenty to handle with Monday phone calls that
overwhelm us on Mondays.
Were probable overpriced anyway and others can also buy boots for less for
other sources than your GMC suppliers as we are nothing more than bunch of
poachers.
On Sun, Feb 21, 2016 at 6:34 PM, Zhookoff, George <
George.Zhookoff@haskell.com> wrote:
> Ken
> Thanks for the thought!
>
> George Zhookoff
>
>
>> On Feb 21, 2016, at 7:40 PM, "Ken Henderson"
> wrote:
>>
>> George,
>>
>> You might have saved a few miles by calling me. There's at least one in
>> the L/S container. :-)
>>
>> Ken H.
>>
>>
>> On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff > George.Zhookoff@haskell.com> wrote:
>>
>>> I'm headed to the Atlanta NASCAR race next week. Figured I'd change the
>>> oil, take sample, replace gasket for the adapter. (Thanks Rob M).
> Pulled
>>> up
>>> the GMC Photo album to glean any hints. But per the warning on the
> photo
>>> site I cracked the oil filter mount. Sunday afternoon now what? I
> called
>>> Jim K. Yep he answered the phone. Part to be shipped ASAP first thing
>>> Monday morning.
>>>
>>> Folks when you need a part for the GMC go to Jim K.
>>>
>>> George " why waste time" Zhookoff
>>> 78 EL II
>>> Atlanta
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295957 is a reply to message #295944] |
Mon, 22 February 2016 06:39 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Jim,
A few years ago you said something totally disrespectful like this on the GMCnet; do you remember what I told you to do?
Well go do it again!
Rob M.
The Pedantic Mechanic
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Jim Kanomata
Sent: Monday, February 22, 2016 4:11 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Oil Filter Mount Thanks Jim K
Ken,
Why don't you do me a favor and send him the mount and the flat gasket as I
have many others to handle.
I'm sure Nick and Gary have plenty to handle with Monday phone calls that
overwhelm us on Mondays.
Were probable overpriced anyway and others can also buy boots for less for
other sources than your GMC suppliers as we are nothing more than bunch of
poachers.
On Sun, Feb 21, 2016 at 6:34 PM, Zhookoff, George <
George.Zhookoff@haskell.com> wrote:
> Ken
> Thanks for the thought!
>
> George Zhookoff
>
>
>> On Feb 21, 2016, at 7:40 PM, "Ken Henderson"
> wrote:
>>
>> George,
>>
>> You might have saved a few miles by calling me. There's at least one in
>> the L/S container. :-)
>>
>> Ken H.
>>
>>
>> On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff > George.Zhookoff@haskell.com> wrote:
>>
>>> I'm headed to the Atlanta NASCAR race next week. Figured I'd change the
>>> oil, take sample, replace gasket for the adapter. (Thanks Rob M).
> Pulled
>>> up
>>> the GMC Photo album to glean any hints. But per the warning on the
> photo
>>> site I cracked the oil filter mount. Sunday afternoon now what? I
> called
>>> Jim K. Yep he answered the phone. Part to be shipped ASAP first thing
>>> Monday morning.
>>>
>>> Folks when you need a part for the GMC go to Jim K.
>>>
>>> George " why waste time" Zhookoff
>>> 78 EL II
>>> Atlanta
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295961 is a reply to message #295944] |
Mon, 22 February 2016 07:28 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Hey, Jim, I meant no implication against your cost. In fact, the comment
just sprung from the fact that I had just come from the storage trailer
where I saw a filter mount -- like the calipers I mentioned earlier.
Now, George, you tell me what to do: I'll be going to the PO in a couple
of hours to mail the caliper arms to Randy, shall I send you the filter
mount, or do you want to stick with the order to Jim?
Ken H.
On Mon, Feb 22, 2016 at 12:10 AM, Jim Kanomata
wrote:
> Ken,
> Why don't you do me a favor and send him the mount and the flat gasket as I
> have many others to handle.
> I'm sure Nick and Gary have plenty to handle with Monday phone calls that
> overwhelm us on Mondays.
> Were probable overpriced anyway and others can also buy boots for less for
> other sources than your GMC suppliers as we are nothing more than bunch of
> poachers.
>
>
> On Sun, Feb 21, 2016 at 6:34 PM, Zhookoff, George George.Zhookoff@haskell.com> wrote:
>
>> Ken
>> Thanks for the thought!
>>
>> George Zhookoff
>>
>>
>>> On Feb 21, 2016, at 7:40 PM, "Ken Henderson"
>> wrote:
>>>
>>> George,
>>>
>>> You might have saved a few miles by calling me. There's at least one
> in
>>> the L/S container. :-)
>>>
>>> Ken H.
>>>
>>>
>>> On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff >> George.Zhookoff@haskell.com> wrote:
>>>
>>>> I'm headed to the Atlanta NASCAR race next week. Figured I'd change
> the
>>>> oil, take sample, replace gasket for the adapter. (Thanks Rob M).
>> Pulled
>>>> up
>>>> the GMC Photo album to glean any hints. But per the warning on the
>> photo
>>>> site I cracked the oil filter mount. Sunday afternoon now what? I
>> called
>>>> Jim K. Yep he answered the phone. Part to be shipped ASAP first thing
>>>> Monday morning.
>>>>
>>>> Folks when you need a part for the GMC go to Jim K.
>>>>
>>>> George " why waste time" Zhookoff
>>>> 78 EL II
>>>> Atlanta
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295962 is a reply to message #295961] |
Mon, 22 February 2016 08:04 |
George Zhookoff
Messages: 398
Registered: December 2004
Location: Snellville, GA
Karma: 6
|
Senior Member |
|
|
I'll stick with Jim. Gotta support our GMC vendors ya know. And I made a commitment by calling on Sunday and Jim jumped right to it.
Thanks again,
George "see you in Dothan" Zhookoff
George Zhookoff
> On Feb 22, 2016, at 8:30 AM, "Ken Henderson" wrote:
>
> Hey, Jim, I meant no implication against your cost. In fact, the comment
> just sprung from the fact that I had just come from the storage trailer
> where I saw a filter mount -- like the calipers I mentioned earlier.
>
> Now, George, you tell me what to do: I'll be going to the PO in a couple
> of hours to mail the caliper arms to Randy, shall I send you the filter
> mount, or do you want to stick with the order to Jim?
>
> Ken H.
>
>
> On Mon, Feb 22, 2016 at 12:10 AM, Jim Kanomata
> wrote:
>
>> Ken,
>> Why don't you do me a favor and send him the mount and the flat gasket as I
>> have many others to handle.
>> I'm sure Nick and Gary have plenty to handle with Monday phone calls that
>> overwhelm us on Mondays.
>> Were probable overpriced anyway and others can also buy boots for less for
>> other sources than your GMC suppliers as we are nothing more than bunch of
>> poachers.
>>
>>
>> On Sun, Feb 21, 2016 at 6:34 PM, Zhookoff, George > George.Zhookoff@haskell.com> wrote:
>>
>>> Ken
>>> Thanks for the thought!
>>>
>>> George Zhookoff
>>>
>>>
>>>> On Feb 21, 2016, at 7:40 PM, "Ken Henderson"
>>> wrote:
>>>>
>>>> George,
>>>>
>>>> You might have saved a few miles by calling me. There's at least one
>> in
>>>> the L/S container. :-)
>>>>
>>>> Ken H.
>>>>
>>>>
>>>> On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff >>> George.Zhookoff@haskell.com> wrote:
>>>>
>>>> > I'm headed to the Atlanta NASCAR race next week. Figured I'd change
>> the
>>>> > oil, take sample, replace gasket for the adapter. (Thanks Rob M).
>>> Pulled
>>>> > up
>>>> > the GMC Photo album to glean any hints. But per the warning on the
>>> photo
>>>> > site I cracked the oil filter mount. Sunday afternoon now what? I
>>> called
>>>> > Jim K. Yep he answered the phone. Part to be shipped ASAP first thing
>>>> > Monday morning.
>>>> >
>>>> > Folks when you need a part for the GMC go to Jim K.
>>>> >
>>>> > George " why waste time" Zhookoff
>>>> > 78 EL II
>>>> > Atlanta
>>>> >
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>>
>> --
>> Jim Kanomata
>> Applied/GMC, Fremont,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #295975 is a reply to message #295962] |
Mon, 22 February 2016 11:36 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Hope this shows up on the site, as I know I was out of line .
Ken Henderson is the last person I would show disrespect as he has aided me
several times and consider him a friend.
Ken , I apologise to you.
It is so easy to let your fingers print.
However,I still do not appreciate some people jabbing us by saying where
else to acquire parts .
If you feel that way come and say it to my face, or to Jim B or Jeff Sirum
and we will stop stocking parts and keep them for or service customers only.
I know Jim B and Jeff S feel that way.
On Mon, Feb 22, 2016 at 6:04 AM, Zhookoff, George <
George.Zhookoff@haskell.com> wrote:
> I'll stick with Jim. Gotta support our GMC vendors ya know. And I made a
> commitment by calling on Sunday and Jim jumped right to it.
> Thanks again,
> George "see you in Dothan" Zhookoff
>
> George Zhookoff
>
>
>> On Feb 22, 2016, at 8:30 AM, "Ken Henderson"
> wrote:
>>
>> Hey, Jim, I meant no implication against your cost. In fact, the comment
>> just sprung from the fact that I had just come from the storage trailer
>> where I saw a filter mount -- like the calipers I mentioned earlier.
>>
>> Now, George, you tell me what to do: I'll be going to the PO in a couple
>> of hours to mail the caliper arms to Randy, shall I send you the filter
>> mount, or do you want to stick with the order to Jim?
>>
>> Ken H.
>>
>>
>> On Mon, Feb 22, 2016 at 12:10 AM, Jim Kanomata
>> wrote:
>>
>>> Ken,
>>> Why don't you do me a favor and send him the mount and the flat gasket
> as I
>>> have many others to handle.
>>> I'm sure Nick and Gary have plenty to handle with Monday phone calls
> that
>>> overwhelm us on Mondays.
>>> Were probable overpriced anyway and others can also buy boots for less
> for
>>> other sources than your GMC suppliers as we are nothing more than bunch
> of
>>> poachers.
>>>
>>>
>>> On Sun, Feb 21, 2016 at 6:34 PM, Zhookoff, George >> George.Zhookoff@haskell.com> wrote:
>>>
>>>> Ken
>>>> Thanks for the thought!
>>>>
>>>> George Zhookoff
>>>>
>>>>
>>>> > On Feb 21, 2016, at 7:40 PM, "Ken Henderson"
>>>> wrote:
>>>> >
>>>> > George,
>>>> >
>>>> > You might have saved a few miles by calling me. There's at least one
>>> in
>>>> > the L/S container. :-)
>>>> >
>>>> > Ken H.
>>>> >
>>>> >
>>>> > On Sun, Feb 21, 2016 at 7:02 PM, George Zhookoff >>> > George.Zhookoff@haskell.com> wrote:
>>>> >
>>>> >> I'm headed to the Atlanta NASCAR race next week. Figured I'd change
>>> the
>>>> >> oil, take sample, replace gasket for the adapter. (Thanks Rob M).
>>>> Pulled
>>>> >> up
>>>> >> the GMC Photo album to glean any hints. But per the warning on the
>>>> photo
>>>> >> site I cracked the oil filter mount. Sunday afternoon now what? I
>>>> called
>>>> >> Jim K. Yep he answered the phone. Part to be shipped ASAP first
> thing
>>>> >> Monday morning.
>>>> >>
>>>> >> Folks when you need a part for the GMC go to Jim K.
>>>> >>
>>>> >> George " why waste time" Zhookoff
>>>> >> 78 EL II
>>>> >> Atlanta
>>>> >>
>>>> >> _______________________________________________
>>>> >> GMCnet mailing list
>>>> >> Unsubscribe or Change List Options:
>>>> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>>
>>>
>>>
>>> --
>>> Jim Kanomata
>>> Applied/GMC, Fremont,CA
>>> jimk@appliedairfilters.com
>>> http://www.appliedgmc.com
>>> 1-800-752-7502
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296001 is a reply to message #295975] |
Mon, 22 February 2016 18:47 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Jim,
It's just toooo easy for all of us to misinterpret intentions in this
communications medium. I know you didn't really think I was trying to
"steal your customer/sale". Nor did I do so. Fact is, with George having
reported already finding what he needed, there was no use for me to waste
electrons with my comment; it was just meant, if anything, to remind a
neighbor that we need to stay in close contact to share our resources. No
need for either you nor I to apologize to the other, AFAIK.
I WILL say, however, that it's important for EVERYONE to remember that this
is, and must remain, an open discussion group, not the private domain of
anyone (except for owner Patrick, who wants it to be open). No one should
ever be criticized by anyone for providing information and/or advice to
anyone else, on any topic. Unless the offering is false or erroneous, in
which case, the other members here will see that it's rectified. It's well
known that we don't tolerate "flaming"; I consider sniping at advice-giving
to be a variation of that.
Adding to the absurdity of the whole thing: Later today I was in my L/S
container and looked again at the oil filter adapter. Turns out, I'd have
had to visit my parts cache 12 miles away to get an Olds oil filter adapter
for George -- this one is an integral part of a Cad 500 OIL PUMP! :-(
Ken H.
On Mon, Feb 22, 2016 at 12:36 PM, Jim Kanomata
wrote:
> Hope this shows up on the site, as I know I was out of line .
> Ken Henderson is the last person I would show disrespect as he has aided me
> several times and consider him a friend.
> Ken , I apologise to you.
> It is so easy to let your fingers print.
> However,I still do not appreciate some people jabbing us by saying where
> else to acquire parts .
> If you feel that way come and say it to my face, or to Jim B or Jeff Sirum
> and we will stop stocking parts and keep them for or service customers
> only.
> I know Jim B and Jeff S feel that way.
>
>
>
> On Mon, Feb 22, 2016 at 6:04 AM, Zhookoff, George George.Zhookoff@haskell.com> wrote:
>
>> I'll stick with Jim. Gotta support our GMC vendors ya know. And I made a
>> commitment by calling on Sunday and Jim jumped right to it.
>> Thanks again,
>> George "see you in Dothan" Zhookoff
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296003 is a reply to message #296001] |
Mon, 22 February 2016 19:22 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Ken,
I sincerely appreciate you reminding me of this forum.
Lot of times one thinks that we understand it all like everything in life.
At least I am man enough to listen and hope I learn it for a long time, not
a year or two like I have been.
I thank you for being a friend and understanding my weakness as well.
On Mon, Feb 22, 2016 at 4:47 PM, Ken Henderson
wrote:
> Jim,
>
> It's just toooo easy for all of us to misinterpret intentions in this
> communications medium. I know you didn't really think I was trying to
> "steal your customer/sale". Nor did I do so. Fact is, with George having
> reported already finding what he needed, there was no use for me to waste
> electrons with my comment; it was just meant, if anything, to remind a
> neighbor that we need to stay in close contact to share our resources. No
> need for either you nor I to apologize to the other, AFAIK.
>
> I WILL say, however, that it's important for EVERYONE to remember that this
> is, and must remain, an open discussion group, not the private domain of
> anyone (except for owner Patrick, who wants it to be open). No one should
> ever be criticized by anyone for providing information and/or advice to
> anyone else, on any topic. Unless the offering is false or erroneous, in
> which case, the other members here will see that it's rectified. It's well
> known that we don't tolerate "flaming"; I consider sniping at advice-giving
> to be a variation of that.
>
> Adding to the absurdity of the whole thing: Later today I was in my L/S
> container and looked again at the oil filter adapter. Turns out, I'd have
> had to visit my parts cache 12 miles away to get an Olds oil filter adapter
> for George -- this one is an integral part of a Cad 500 OIL PUMP! :-(
>
> Ken H.
>
>
> On Mon, Feb 22, 2016 at 12:36 PM, Jim Kanomata
> wrote:
>
>> Hope this shows up on the site, as I know I was out of line .
>> Ken Henderson is the last person I would show disrespect as he has aided
> me
>> several times and consider him a friend.
>> Ken , I apologise to you.
>> It is so easy to let your fingers print.
>> However,I still do not appreciate some people jabbing us by saying where
>> else to acquire parts .
>> If you feel that way come and say it to my face, or to Jim B or Jeff
> Sirum
>> and we will stop stocking parts and keep them for or service customers
>> only.
>> I know Jim B and Jeff S feel that way.
>>
>>
>>
>> On Mon, Feb 22, 2016 at 6:04 AM, Zhookoff, George > George.Zhookoff@haskell.com> wrote:
>>
>>> I'll stick with Jim. Gotta support our GMC vendors ya know. And I made
> a
>>> commitment by calling on Sunday and Jim jumped right to it.
>>> Thanks again,
>>> George "see you in Dothan" Zhookoff
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296004 is a reply to message #296003] |
Mon, 22 February 2016 19:32 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Jim,
May nothing ever come between us, Friend.
Ken
On Mon, Feb 22, 2016 at 8:22 PM, Jim Kanomata wrote:
> Ken,
> I sincerely appreciate you reminding me of this forum.
> Lot of times one thinks that we understand it all like everything in life.
> At least I am man enough to listen and hope I learn it for a long time, not
> a year or two like I have been.
> I thank you for being a friend and understanding my weakness as well.
>
> On Mon, Feb 22, 2016 at 4:47 PM, Ken Henderson
> wrote:
>
>> Jim,
>>
>> It's just toooo easy for all of us to misinterpret intentions in this
>> communications medium. I know you didn't really think I was trying to
>> "steal your customer/sale". Nor did I do so. Fact is, with George
> having
>> reported already finding what he needed, there was no use for me to waste
>> electrons with my comment; it was just meant, if anything, to remind a
>> neighbor that we need to stay in close contact to share our resources.
> No
>> need for either you nor I to apologize to the other, AFAIK.
>>
>> I WILL say, however, that it's important for EVERYONE to remember that
> this
>> is, and must remain, an open discussion group, not the private domain of
>> anyone (except for owner Patrick, who wants it to be open). No one
> should
>> ever be criticized by anyone for providing information and/or advice to
>> anyone else, on any topic. Unless the offering is false or erroneous, in
>> which case, the other members here will see that it's rectified. It's
> well
>> known that we don't tolerate "flaming"; I consider sniping at
> advice-giving
>> to be a variation of that.
>>
>> Adding to the absurdity of the whole thing: Later today I was in my L/S
>> container and looked again at the oil filter adapter. Turns out, I'd
> have
>> had to visit my parts cache 12 miles away to get an Olds oil filter
> adapter
>> for George -- this one is an integral part of a Cad 500 OIL PUMP! :-(
>>
>> Ken H.
>>
>>
>> On Mon, Feb 22, 2016 at 12:36 PM, Jim Kanomata
>> wrote:
>>
>>> Hope this shows up on the site, as I know I was out of line .
>>> Ken Henderson is the last person I would show disrespect as he has
> aided
>> me
>>> several times and consider him a friend.
>>> Ken , I apologise to you.
>>> It is so easy to let your fingers print.
>>> However,I still do not appreciate some people jabbing us by saying
> where
>>> else to acquire parts .
>>> If you feel that way come and say it to my face, or to Jim B or Jeff
>> Sirum
>>> and we will stop stocking parts and keep them for or service customers
>>> only.
>>> I know Jim B and Jeff S feel that way.
>>>
>>>
>>>
>>> On Mon, Feb 22, 2016 at 6:04 AM, Zhookoff, George >> George.Zhookoff@haskell.com> wrote:
>>>
>>>> I'll stick with Jim. Gotta support our GMC vendors ya know. And I
> made
>> a
>>>> commitment by calling on Sunday and Jim jumped right to it.
>>>> Thanks again,
>>>> George "see you in Dothan" Zhookoff
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296005 is a reply to message #296004] |
Mon, 22 February 2016 20:22 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
While we're talking parts - Jim K, are you going to bring a truck of ordered parts to Dothan? I've a need for several small items I'd rather call Nick and pay for them and have him toss them on the truck if there's one coming.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: Oil Filter Mount Thanks Jim K [message #296014 is a reply to message #295912] |
Tue, 23 February 2016 00:53 |
 |
John Heslinga
Messages: 632
Registered: February 2011
Location: Edmonton, Alberta, Canada
Karma: 4
|
Senior Member |
|
|
George:
May I add one other thing about mounting that cooler adaptor on the oil filter mount. There is a positioning Key that needs to fit in the slot of the oil filter mount. If that was out of place, things can crack too. Watch for its proper alignment and placement when you reinstall things. My photos are not the best to indicate this so you will need to expand them.
I removed (ground out) that key so I could re-clock the adaptor.
In this photo it is on the left side of the Adaptor. (Notice the chunk of aluminium)
http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49862-oil-cooler-adaptor-and-lines-3.html
It fits in the indentation on the left in this photo. Notice that it is not round.
http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49850-filter-base-ports-2.html
Notice how the key has been machined away in this photo.
http://www.gmcmhphotos.com/photos/discussion-photos/p55769-silicone-o-ring-for-oil-cooler-adaptor.html
Best regards
John and Cathie Heslinga
1974 Canyonlands 260
455, Manny tranny and 1 ton, 3:70 LS,
Red Seal Journeyman, DTE, BEd. MEd.
Edmonton, Alberta
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296015 is a reply to message #296014] |
Tue, 23 February 2016 01:04 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
John,
I'm glad you interjected tht information, as that will cause the mount to
be damaged.
For us that have done this operation few times, it becomes automatic and
forget to advise people that have not done so as often.
403 is tricky as one will feel it must be set an an angle that looks
proper, but not quite right.
On Mon, Feb 22, 2016 at 10:53 PM, John Heslinga wrote:
> George:
>
> May I add one other thing about mounting that cooler adaptor on the oil
> filter mount. There is a positioning Key that needs to fit in the slot of
> the
> oil filter mount. If that was out of place, things can crack too. Watch
> for its proper alignment and placement when you reinstall things. My photos
> are not the best to indicate this so you will need to expand them.
> I removed (ground out) that key so I could re-clock the adaptor.
> In this photo it is on the left side of the Adaptor. (Notice the chunk of
> aluminium)
>
> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49862-oil-cooler-adaptor-and-lines-3.html
>
>
> It fits in the indentation on the left in this photo. Notice that it is
> not round.
>
> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49850-filter-base-ports-2.html
>
>
>
> Notice how the key has been machined away in this photo.
>
> http://www.gmcmhphotos.com/photos/discussion-photos/p55769-silicone-o-ring-for-oil-cooler-adaptor.html
>
>
>
> Best regards
> --
> John and Cathie Heslinga
> 1974 Canyonlands 260
> 455, Manny tranny and 1 ton, 3:70 LS,
> Red Seal Journeyman, DTE, BEd. MEd.
> Edmonton, Alberta
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296016 is a reply to message #296015] |
Tue, 23 February 2016 01:08 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Ken,
You are not only a great friend but a gentleman and I appreciate the way
you accept me for my faults.
I have a small poster here that says:
A friend is someone that knows all about you, but still likes you anyway.
Thank you.
On Mon, Feb 22, 2016 at 11:04 PM, Jim Kanomata
wrote:
> John,
> I'm glad you interjected tht information, as that will cause the mount to
> be damaged.
> For us that have done this operation few times, it becomes automatic and
> forget to advise people that have not done so as often.
> 403 is tricky as one will feel it must be set an an angle that looks
> proper, but not quite right.
>
> On Mon, Feb 22, 2016 at 10:53 PM, John Heslinga
> wrote:
>
>> George:
>>
>> May I add one other thing about mounting that cooler adaptor on the oil
>> filter mount. There is a positioning Key that needs to fit in the slot of
>> the
>> oil filter mount. If that was out of place, things can crack too. Watch
>> for its proper alignment and placement when you reinstall things. My photos
>> are not the best to indicate this so you will need to expand them.
>> I removed (ground out) that key so I could re-clock the adaptor.
>> In this photo it is on the left side of the Adaptor. (Notice the chunk of
>> aluminium)
>>
>> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49862-oil-cooler-adaptor-and-lines-3.html
>>
>>
>> It fits in the indentation on the left in this photo. Notice that it is
>> not round.
>>
>> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49850-filter-base-ports-2.html
>>
>>
>>
>> Notice how the key has been machined away in this photo.
>>
>> http://www.gmcmhphotos.com/photos/discussion-photos/p55769-silicone-o-ring-for-oil-cooler-adaptor.html
>>
>>
>>
>> Best regards
>> --
>> John and Cathie Heslinga
>> 1974 Canyonlands 260
>> 455, Manny tranny and 1 ton, 3:70 LS,
>> Red Seal Journeyman, DTE, BEd. MEd.
>> Edmonton, Alberta
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296021 is a reply to message #296016] |
Tue, 23 February 2016 03:45 |
Guy Lopes
Messages: 499
Registered: April 2004
Location: Sacramento, CA
Karma: 3
|
Senior Member |
|
|
Jim,
Hell, if that's the criteria, please count me as another one of your friends!
Guy Lopes
76 Birchaven "Orion"
Sacramento, CA
W6TOL
www.GMC-Guy.com
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Jim Kanomata
Sent: Monday, February 22, 2016 11:09 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Oil Filter Mount Thanks Jim K
Ken,
You are not only a great friend but a gentleman and I appreciate the way you accept me for my faults.
I have a small poster here that says:
A friend is someone that knows all about you, but still likes you anyway.
Thank you.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Guy Lopes
76 Birchaven "Orion"
Sacramento, CA
W6TOL
www.GMC-Guy.com
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296022 is a reply to message #296014] |
Tue, 23 February 2016 07:16 |
George Zhookoff
Messages: 398
Registered: December 2004
Location: Snellville, GA
Karma: 6
|
Senior Member |
|
|
John
Thanks for the heads up. Yes I reviewed all your pictures closely before the operation. The thought has crossed my mind that maybe I hadn't positioned the adapter properly.
This time I'll go to the extreme to confirm fit.
Thanks again
George Zhookoff
78 EL II
Atlanta
> On Feb 23, 2016, at 1:54 AM, "John Heslinga" wrote:
>
> George:
>
> May I add one other thing about mounting that cooler adaptor on the oil filter mount. There is a positioning Key that needs to fit in the slot of the
> oil filter mount. If that was out of place, things can crack too. Watch for its proper alignment and placement when you reinstall things. My photos
> are not the best to indicate this so you will need to expand them.
> I removed (ground out) that key so I could re-clock the adaptor.
> In this photo it is on the left side of the Adaptor. (Notice the chunk of aluminium)
> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49862-oil-cooler-adaptor-and-lines-3.html
>
>
> It fits in the indentation on the left in this photo. Notice that it is not round.
> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49850-filter-base-ports-2.html
>
>
>
> Notice how the key has been machined away in this photo.
> http://www.gmcmhphotos.com/photos/discussion-photos/p55769-silicone-o-ring-for-oil-cooler-adaptor.html
>
>
>
> Best regards
> --
> John and Cathie Heslinga
> 1974 Canyonlands 260
> 455, Manny tranny and 1 ton, 3:70 LS,
> Red Seal Journeyman, DTE, BEd. MEd.
> Edmonton, Alberta
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296055 is a reply to message #296022] |
Tue, 23 February 2016 19:00 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Guy,
Oh my gosh, you have seen my dirty under ware that I have flipped over and
worn, and still want to be my friend ?
On Tue, Feb 23, 2016 at 5:16 AM, Zhookoff, George <
George.Zhookoff@haskell.com> wrote:
> John
> Thanks for the heads up. Yes I reviewed all your pictures closely before
> the operation. The thought has crossed my mind that maybe I hadn't
> positioned the adapter properly.
> This time I'll go to the extreme to confirm fit.
> Thanks again
> George Zhookoff
> 78 EL II
> Atlanta
>
>
>> On Feb 23, 2016, at 1:54 AM, "John Heslinga"
> wrote:
>>
>> George:
>>
>> May I add one other thing about mounting that cooler adaptor on the oil
> filter mount. There is a positioning Key that needs to fit in the slot of
> the
>> oil filter mount. If that was out of place, things can crack too.
> Watch for its proper alignment and placement when you reinstall things. My
> photos
>> are not the best to indicate this so you will need to expand them.
>> I removed (ground out) that key so I could re-clock the adaptor.
>> In this photo it is on the left side of the Adaptor. (Notice the chunk
> of aluminium)
>>
> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49862-oil-cooler-adaptor-and-lines-3.html
>>
>>
>> It fits in the indentation on the left in this photo. Notice that it is
> not round.
>>
> http://www.gmcmhphotos.com/photos/oil-filter-and-cooler/p49850-filter-base-ports-2.html
>>
>>
>>
>> Notice how the key has been machined away in this photo.
>>
> http://www.gmcmhphotos.com/photos/discussion-photos/p55769-silicone-o-ring-for-oil-cooler-adaptor.html
>>
>>
>>
>> Best regards
>> --
>> John and Cathie Heslinga
>> 1974 Canyonlands 260
>> 455, Manny tranny and 1 ton, 3:70 LS,
>> Red Seal Journeyman, DTE, BEd. MEd.
>> Edmonton, Alberta
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Oil Filter Mount Thanks Jim K [message #296076 is a reply to message #296055] |
Wed, 24 February 2016 02:52 |
Guy Lopes
Messages: 499
Registered: April 2004
Location: Sacramento, CA
Karma: 3
|
Senior Member |
|
|
Hahaha! I would like to formally inform everyone that is simply a figure of
speech.
Not only yes, but heck yes Jim!
Guy Lopes
76 Birchaven "Orion"
Sacramento, CA
W6TOL
www.GMC-Guy.com
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Jim
Kanomata
Sent: Tuesday, February 23, 2016 5:01 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Oil Filter Mount Thanks Jim K
Guy,
Oh my gosh, you have seen my dirty under ware that I have flipped over and
worn, and still want to be my friend ?
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Guy Lopes
76 Birchaven "Orion"
Sacramento, CA
W6TOL
www.GMC-Guy.com
|
|
|
|
Goto Forum:
Current Time: Fri Oct 04 02:33:03 CDT 2024
Total time taken to generate the page: 0.00922 seconds
|
GMCforum
Search
Help
Register
Login
Home
