|
Re: [GMCnet] Restoration.Never pulled holding tanks. Need advice on that. [message #294664 is a reply to message #294659] |
Fri, 29 January 2016 07:29 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Bob,
IIRC, all Coachmen tanks' connections were slip joints (grommets with
inserted pipes). If that's the case, seems to me all you've got to do is
remove the straps holding the tanks up and lower them. For peace of mind,
I guess the thing to do is get a hold on any stubs you can reach and pull
them up first.
Ken H.
On Fri, Jan 29, 2016 at 2:53 AM, Bob Dunahugh wrote:
> Due to the fire. Access from the top isn't possible. But everything
> underneath is fine. So can I still get both tanks out? I have two warm
> days to get the tanks out. And the drivetrain. It's going to be above 30.
> Next week highs are expected to be around 15 above zero. Need to boogie
> on this. Bob Dunahugh 78 Royale
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
Re: [GMCnet] Restoration.Never pulled holding tanks. Need advice on that. [message #294728 is a reply to message #294726] |
Sat, 30 January 2016 13:49 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Coachmans did different things, so it's hard to know till one looks at it
from the top.
On Sat, Jan 30, 2016 at 10:17 AM, James Hupy wrote:
> Sawzall is your friend here.
> Jim Hupy
> Salem, Or
> 78 GMC ROYALE 403
> On Jan 30, 2016 10:01 AM, "John Yurtinus" wrote:
>
>> My Birchaven had glued ABS joints from the top (on ABS tanks). I tried
>> pulling them from the top and just ended up busting the tops of the old
>> tanks.
>> The tanks were busted anyway so no skin off my teeth, but if you do have
>> ABS tanks you might want to try to get a clean cut on the pipes from the
> top
>> before dropping them from below. I'm replacing them with PE tanks and
> slip
>> joints.
>> --
>> 77 Birchaven 23 w/ 455
>> Reno, NV
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|