Onan Ignition Wires [message #294248] |
Sat, 23 January 2016 17:48 |
mechanic007
Messages: 31 Registered: August 2015 Location: Santa Monica, CA
Karma: 0
|
Member |
|
|
On 4k watt Onan there are two ignition wires at the top back of the generator, one on the right and one on the left. One seems to be missing and one is disconnected on one end. What are the proper connections? Thanks.
'73 Canyonlands 230 23' in Southern California.
1973 Canyonlands 230 (23')
Odometer reads 37K but probably 137K or 237K
Side wet bath/Rear bed/couch
Kitchen to the rear of the door
inSanity Monica,California
|
|
|
|
|
|
Re: Onan Ignition Wires [message #294258 is a reply to message #294248] |
Sat, 23 January 2016 19:17 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Are you taking about plug wires or 12V wires? Plug wires can go eitherway as it was mentioned it is waste spark type. Voltage goes from one coil tower through plug wire to the center electrode of one plug, jumps gap to outer electrode to block, conducts through block to outer electrode of other plug, jumps to center electrode, through plug wire to other coil tower.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|