|
|
Re: [GMCnet] 12V plug, switch, light, and cable fitting on one cover plate.What is it? [message #293030 is a reply to message #293021] |
Mon, 28 December 2015 08:54 |
tphipps
Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
This is the connection block from Winguard installed for TV antenna operation. You may or may not find it useful. Mine is not in use. I went a different way. If you choose to use this and tie into an antenna with an amplifier, you may have poor results. Two RF preamps do not improve the final results. One of the amps needs to be taken out of the loop. Need to think of how you intend to bring TV signal not the coach, then do a complete system design.
Winguard makes their wings with and without preamps installed, the heads are interchangible. Jack has the RF preamp installed internally. I do not know if you can defeat or remove the internal preamps from the circuit.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|