| Transmission Pressure Port Location [message #289956] |
Wed, 04 November 2015 23:17  |
George Beckman
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma: 11
|
Senior Member |
|
|
I put the transmission pressure gauge sender in today. I only found one port, but it was not what I expected. The plug i found was on a 45* angle from the driver's side and located just above the pan and near the rear of the pan.. It was the 45* angle that I didn't expect.
Did I find the right port?
'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
|
|
|
|
| Re: [GMCnet] Transmission Pressure Port Location [message #289959 is a reply to message #289956] |
Wed, 04 November 2015 23:21  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Yes, it is at 45 degrees.
On Wed, Nov 4, 2015 at 9:17 PM, George Beckman wrote:
> I put the transmission pressure gauge sender in today. I only found one
> port, but it was not what I expected. The plug i found was on a 45* angle
> from
> the driver's side and located just above the pan and near the rear of the
> pan.. It was the 45* angle that I didn't expect.
>
> Did I find the right port?
> --
> '74 Eleganza, SE, Howell + EBL
> Best Wishes,
> George
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
