GMCforum: GMCnet » Oil pressure sender

Home » Public Forums » GMCnet » Oil pressure sender

Show: Today's Messages :: Polls :: Message Navigator

Oil pressure sender [message #287963]

Mon, 28 September 2015 03:38

Loffen

Messages: 1087
Registered: August 2013
Location: Norway

Karma: 1

Senior Member

Does anyone know if the original oil pressure sender is for a 60 or 80 psi gauge ? or if the original gauge range is 60 or 80 psi ?

1973 23' # 1848 Sky Blue Glacier called Baby Blue and a 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Green, And sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel in Norway

Report message to a moderator

Re: Oil pressure sender [message #287967 is a reply to message #287963]

Mon, 28 September 2015 08:30

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

The Advance replacement puts mine at half scale, which the DigiPanen calls 40PSI.. which would indicate 80 PSI full scale.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Re: [GMCnet] Oil pressure sender [message #287973 is a reply to message #287963]

Mon, 28 September 2015 08:04

powwerjon

Messages: 849
Registered: March 2013

Karma: -2

Senior Member

It would be an 80 PSIG sender. The gauge does know or care what sender it is attached to as long it is a 0 to 90 ohm sender. Gauge indicator is 0, 20, 40, 60 and 80 psig thru is range. Typically the accuracy of automotive gauges is 1 to 2 percent of range.

J.R. Wright
GMC GreatLaker
Newsletter Editor/Publisher
GMCGL Tech Editor
78 Buskirk 30' Stretch
75 Avion Under Reconstruction
Michigan

> On Sep 28, 2015, at 2:38 AM, Espen Heitmann wrote:
>
> Does anyone know if the original oil pressure sender is for a 60 or 80 psi gauge ? or if the original gauge range is 60 or 80 psi ?
> --
> 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Mean Green Machine,
> And just sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel
> in Norway
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Oil pressure sender [message #287977 is a reply to message #287973]

Mon, 28 September 2015 12:02

Loffen

Messages: 1087
Registered: August 2013
Location: Norway

Karma: 1

Senior Member

Thanks Johnny Smile

No that is true, the gauge does not care as long as it get a 0-90 ohm signal, it does however matter for the reading of the gauge if it is set up for a 90 ohm signal at 60 or 80 psi, now it is not so important on my GMC as the dial does not have and numbers on it, but if it had the gauge would show 40 psi at 30 psi with the 60 psi sender.

Report message to a moderator

Previous Topic:	Battery Isolator Photos
Next Topic:	Noisy Lifter (I think)

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 06:39:43 CST 2024

Total time taken to generate the page: 0.01494 seconds