GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » EFi Timing Control (Misar System) (Timing Control)
EFi Timing Control (Misar System) [message #285698] Mon, 24 August 2015 01:36 Go to next message
jturbo is currently offline  jturbo   United States
Messages: 76
Registered: August 2013
Location: Socal
Karma: 1
Member
Efi Kit's offer Timing Control and it seems we have several options to do this.

Has anyone tried any of the below items or do you find timing control does not work?

1. Oldsmobile 455 and 403 (MSD 6al and computer distributor?)
2. Oldsmobile 403 and 455 (Oldmobile 307) 7 Pin computer control distributor (No vacuum advance)
3. Oldsmobile 403 and 455 (Oldmobile 403 Misar Crank Trigger with or without Misar control box) (Tornado 77)
4. MSD or Edelbrock Crank Trigger kit?


If you have tried these above items what are your results?


1978 Royal 403 1977 Birchaven 455 1977 Kingsley 455 All under Upgrading and restoration Rosemead California
Re: EFi Timing Control (Misar System) [message #285701 is a reply to message #285698] Mon, 24 August 2015 02:25 Go to previous messageGo to next message
George Beckman is currently offline  George Beckman   United States
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma: 11
Senior Member
jturbo wrote on Sun, 23 August 2015 23:36
Efi Kit's offer Timing Control and it seems we have several options to do this.

Has anyone tried any of the below items or do you find timing control does not work?

1. Oldsmobile 455 and 403 (MSD 6al and computer distributor?)
2. Oldsmobile 403 and 455 (Oldmobile 307) 7 Pin computer control distributor (No vacuum advance)
3. Oldsmobile 403 and 455 (Oldmobile 403 Misar Crank Trigger with or without Misar control box) (Tornado 77)
4. MSD or Edelbrock Crank Trigger kit?


If you have tried these above items what are your results?


These answers relate to the answers to your six questions asked earlier.

The EBL EFI system uses #2. THe EBL spark control is integrated with fuel so it is more like modern computer controlled vehicles. For instance, when the computer deems it suitable to go into Lean Cruise (16.4 or more to 1 air fuel rather than the standard 14.7:1) the spark is advanced 4-5 degrees because lean mixtures take longer to get the fire going.

Atomic can be set up for #2 or MSD. Atomic spark control is like a distributor that is well curved and has a perfect set of weights and vacuum pot.

I think a couple of caddy engine coaches have crank trigger kits.

Knock sensors allow a more aggressive timing that is retarded when knocking is detected.


'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
Re: EFi Timing Control (Misar System) [message #285703 is a reply to message #285701] Mon, 24 August 2015 02:34 Go to previous messageGo to next message
jturbo is currently offline  jturbo   United States
Messages: 76
Registered: August 2013
Location: Socal
Karma: 1
Member
Knock Sensor?

Which EFi supports Knock sensor?


I am installing 3 different efi kits on 3 different GMC's and trying to figure out which is best optional parts for each.

1st one is getting Holley Terminator with 307 distributor so far the plan (Fuel system not sure)
2nd one is getting Msd Atomic system (have distributor MSD and 6al but not sure if that is better or another 307 compcontrol.
3rd one Edelbrock EFI street (same issue 307 comp control or something else and fuel (edelbrock sump pump)


each of these is early on but I plan on installing each but wanted opinions of what people have installed or added etc.


1978 Royal 403 1977 Birchaven 455 1977 Kingsley 455 All under Upgrading and restoration Rosemead California
Re: EFi Timing Control (Misar System) [message #285725 is a reply to message #285703] Mon, 24 August 2015 09:40 Go to previous message
wally is currently offline  wally   Canada
Messages: 643
Registered: August 2004
Location: Omaha Nebraska
Karma: 5
Senior Member
jturbo wrote on Mon, 24 August 2015 02:34
Knock Sensor?

Which EFi supports Knock sensor?


I am installing 3 different efi kits on 3 different GMC's and trying to figure out which is best optional parts for each.

1st one is getting Holley Terminator with 307 distributor so far the plan (Fuel system not sure)
2nd one is getting Msd Atomic system (have distributor MSD and 6al but not sure if that is better or another 307 compcontrol.
3rd one Edelbrock EFI street (same issue 307 comp control or something else and fuel (edelbrock sump pump)


each of these is early on but I plan on installing each but wanted opinions of what people have installed or added etc.

For integrated knock control Megasquirt 3 EFI has that as an option. http://www.msextra.com/ For windowed sensing individual cylinder retard Applied has J&S Safeguard that works stand alone. http://www.appliedgmc.com/prod.itml/icOid/1154 We have both installed. They "hear" different.

On the road Whitehorse, Yukon Ca


Wally Anderson
Omaha NE
75 Glenbrook
Previous Topic: [GMCnet] Off Topic. Missing a favorite Presidential candidate? They're ALL in IOWA.
Next Topic: [GMCnet] Shurflo 4028 Water Pump
Goto Forum:
  


Current Time: Sun Nov 17 09:23:45 CST 2024

Total time taken to generate the page: 0.00722 seconds