GMCforum: GMCnet

Home » Public Forums » GMCnet » SEATS (What replacement Seats are being used)

Show: Today's Messages :: Polls :: Message Navigator

SEATS [message #285691]

Mon, 24 August 2015 01:15

jturbo

Messages: 76
Registered: August 2013
Location: Socal

Karma: 1

Member

I have seen several times that people are using honds Seats what year model what has to be done?

Also saw people using dodge seats same question

1978 Royal 403 1977 Birchaven 455 1977 Kingsley 455 All under Upgrading and restoration Rosemead California

Report message to a moderator

Re: SEATS [message #285694 is a reply to message #285691]

Mon, 24 August 2015 01:27

GMC Cruse

Messages: 606
Registered: June 2009
Location: SE Michigan

Karma: 3

Senior Member

jturbo wrote on Mon, 24 August 2015 02:15

I have seen several times that people are using honds Seats what year model what has to be done?

Also saw people using dodge seats same question

Search for Honda seats on photo site, a lot of info there. Example:
http://www.gmcmhphotos.com/photos/men-27s-mall-gems/p48481-honda-odyssey-center-row-seats.html

Mike K. '75 PB Southeast Michigan

[Updated on: Mon, 24 August 2015 01:30]

Report message to a moderator

Re: SEATS [message #285706 is a reply to message #285691]

Mon, 24 August 2015 02:42

George Beckman

Messages: 1085
Registered: October 2008
Location: Colfax, CA

Karma: 11

Senior Member

jturbo wrote on Sun, 23 August 2015 23:15

I have seen several times that people are using honds Seats what year model what has to be done?

Also saw people using dodge seats same question

I got the Honda seats. Mine is a '74 and the pedestal is slanted and it was too high. We cut it down and rewelded it.

There was some sort of sound proofing goo on them that made it a pain. Sorry I am not a better welder. It holds but looks like a two year old did it. Painted gray they looked fine. The last picture shows my wife's pedestal. My nice little board with the EFI computer no longer fit under the seat and so I had to pull the modules off the board and sort of stuff them under her seat. Not real proud of that work.

http://www.gmcmhphotos.com/photos/g5288-honda-seats-on-early-sloped-pedestals.html

'74 Eleganza, SE, Howell + EBL
Best Wishes,
George

Report message to a moderator

Re: [GMCnet] SEATS [message #285723 is a reply to message #285706]

Mon, 24 August 2015 09:12

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

Read here
http://gmcmotorhome.info/living.html#honda

On Monday, August 24, 2015, George Beckman wrote:

> jturbo wrote on Sun, 23 August 2015 23:15
>> I have seen several times that people are using honds Seats what year
> model what has to be done?
>>
>> Also saw people using dodge seats same question
>
> I got the Honda seats. Mine is a '74 and the pedestal is slanted and it
> was too high. We cut it down and rewelded it.
>
> There was some sort of sound proofing goo on them that made it a pain.
> Sorry I am not a better welder. It holds but looks like a two year old did
> it.
> Painted gray they looked fine. The last picture shows my wife's pedestal.
> My nice little board with the EFI computer no longer fit under the seat and
> so I had to pull the modules off the board and sort of stuff them under
> her seat. Not real proud of that work.
>
>
> http://www.gmcmhphotos.com/photos/g5288-honda-seats-on-early-sloped-pedestals.html
> --
> '74 Eleganza, SE, Howell + EBL
> Best Wishes,
> George
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] SEATS [message #285727 is a reply to message #285694]

Mon, 24 August 2015 09:56

powerjon

Messages: 2446
Registered: January 2004

Karma: 5

Senior Member

The Honda Seats are nice, good quality, limited choice of color, Tan and Grey, Sit well and we mounted our on 6 way power seat bases. Others have report of using Middle seats out of other vans.

JR Wright
GMC Great Laker MHC
GMC Eastern States
GMCGL Tech Editor
GMCMHI
78 GMC Buskirk 30’ Stretch
1975 GMC Avion (Under Reconstruction)
Michigan

> On Aug 24, 2015, at 2:27 AM, Mike wrote:
>
> jturbo wrote on Mon, 24 August 2015 02:15
>> I have seen several times that people are using honds Seats what year model what has to be done?
>>
>> Also saw people using dodge seats same question
>
>
> http://www.gmcmhphotos.com/photos/men-27s-mall-gems/p48481-honda-odyssey-center-row-seats.html
> --
> Mike K.
> '75 PB
> Southeast Michigan
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan

Report message to a moderator

Re: [GMCnet] SEATS [message #285734 is a reply to message #285691]

Mon, 24 August 2015 11:01

Rob

Messages: 651
Registered: November 2013
Location: Victoria, BC

Karma: 3

Senior Member

I've also come across some nice looking middle seats (with armrests on both sides) from Ford Windstars. I just haven't found a pair in tan...

Rob
Victoria, BC
76 Royale - Rear Twins/Dry Bath

On 2015-08-23, at 11:15 PM, john wrote:

> I have seen several times that people are using honds Seats what year model what has to be done?
>
> Also saw people using dodge seats same question
>
> --
> 1978 Royal 403
> 1977 Birchaven 455
> 1977 Kingsley 455
>
> All under Upgrading and restoration
>
> Rosemead California
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Rob - Victoria, BC - 76 Royale - Rear Twins/Dry Bath

Report message to a moderator

Previous Topic:	[GMCnet] Shurflo 4028 Water Pump
Next Topic:	Introduction and Question on Torsion Bars

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 20:22:58 CDT 2024

Total time taken to generate the page: 0.00859 seconds