[GMCnet] Frozen axle nut [message #285639] |
Sat, 22 August 2015 22:09 |
Tom Whitton
Messages: 235 Registered: February 2004 Location: Paducah, KY
Karma: 0
|
Senior Member |
|
|
Sorry, John, I addressed my post to the wrong person. I should have addressed it to Sigmund.
Tom Whitton
26 ft updated GMC
Paducah, KY
John,
I understand your problem in trying to loosen the axle nut. Like everyone else, I had the same problem. I'm sorry but my solution isn't going to help you but maybe it will give you an idea. My engine was still intact and running. I put a cheater pipe over a 3/4" drive break over bar, put it on the axle nut, made sure the pipe was on the ground, put the coach in reverse (right side) and backed up. The nut came loose right away. Unorthodox but it worked.
Tom Whitton
26 ft updated GMC
Paducah, KY
Just wondering with no heads and therefore no intake, where will you attach pick points?? Head bolt holes? I have never tryed to loosten that so don't
know LH or RH.
--
John Lebetski
Woodstock, IL
77 Eleganza II
Source America First
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|