[GMCnet] Duracool kit [message #283015] |
Fri, 24 July 2015 09:24 |
glwgmc
Messages: 1014 Registered: June 2004
Karma: 10
|
Senior Member |
|
|
Hi Gary,
No need as the system still held pressure. Just put the cans in in the order described in the included instructions. They say to run the AC 15-30 minutes after putting in the dryer can, then another 15 minutes following the sealer and another 15 following the oil. I was a bit less patient so did not run quite that long between cans. I will retest the pressure today to make sure it is staying even. Seems to me to be a good preventative maintenance step that should be performed every few years which is what I plan to do from here on.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
===============
Message: 8
Date: Thu, 23 Jul 2015 19:23:00 -0700
From: Duallycc
To: "gmclist@list.gmcnet.org"
Subject: Re: [GMCnet] Duracool kit
Message-ID:
Content-Type: text/plain; charset=utf-8
Hey Gerry;
Did you pull a vacuum on the system first???
Gary Berry in Prosser, WA
================
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|