| Is this tap fused? [message #282184] |
Wed, 15 July 2015 14:32  |
bpimm
Messages: 211
Registered: June 2013
Location: Washougal Washington
Karma: 2
|
Senior Member |
|
|
While finding a switched ignition feed for the electric fuel pumps I came across this feed (circled in red) from the fuse block that goes to the BATT terminal on the electronic distributor with out a fuse, just wondering if it's tied through one of the fuses or is unfused.
Brian & RaeDean
1973 26' #383
Washougal WA
|
|
|
|
|
|
| Re: Is this tap fused? [message #282195 is a reply to message #282194] |
Wed, 15 July 2015 17:02  |
Carl S.
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
I just tapped into mine for a back up camera a few months ago and if I remember correctly, I'm pretty sure the power comes into the panel at the outsides and the center is fused. Try pulling a fuse to test this. If the test light lights up at the outer edge of the panel, and not in the center (with the fuse out) then what I stated is correct.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
