GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Roof Air
[GMCnet] Roof Air [message #282096] Tue, 14 July 2015 13:15 Go to next message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
Senior Member
With all this talk of air conditioning I thought I should report my first impressions of the Atwood air conditioner I bought from Jim K some months ago. It cools very well and the Onan never even begins to strain. The air flow seems very good - lots forward and back. My only complaint is the control panel is a flip-down affair that faces the back of the coach when down. My fingers just aren’t well suited to flipping that thing down, it too close to my eyes to focus on what I’m doing, and if it’s down I inevitably smack my head into it. It does have a little hand held remote control that I believe works from the front as well as the back, though I’ve not used it extensively.

Please don’t take this as a complaint! My old air conditioner had analog dials and rotary switches - this is an improvement! And it’s core function, cooling the coach, it does very well. It’s quieter than my old Intermatic unit, though the old one was low-profile and this is full sized.

The installation was straight-forward and without issues.

Count me as a satisfied customer.

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
Re: [GMCnet] Roof Air [message #282098 is a reply to message #282096] Tue, 14 July 2015 14:08 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
Billy Massy has the same unit, but it stops for few seconds when the temp
is reached then goes back on.
After some run around, I forced our supplier to send another new unit and
return the defective.
I'll probably get hit for half of the freight, but in my book, one needs
to know that when you run a business, you need to absorb these costs, or
not be in business.

On Tue, Jul 14, 2015 at 11:15 AM, Larry Davick wrote:

> With all this talk of air conditioning I thought I should report my first
> impressions of the Atwood air conditioner I bought from Jim K some months
> ago. It cools very well and the Onan never even begins to strain. The air
> flow seems very good - lots forward and back. My only complaint is the
> control panel is a flip-down affair that faces the back of the coach when
> down. My fingers just aren’t well suited to flipping that thing down, it
> too close to my eyes to focus on what I’m doing, and if it’s down I
> inevitably smack my head into it. It does have a little hand held remote
> control that I believe works from the front as well as the back, though
> I’ve not used it extensively.
>
> Please don’t take this as a complaint! My old air conditioner had analog
> dials and rotary switches - this is an improvement! And it’s core
> function, cooling the coach, it does very well. It’s quieter than my old
> Intermatic unit, though the old one was low-profile and this is full sized.
>
> The installation was straight-forward and without issues.
>
> Count me as a satisfied customer.
>
> Larry Davick
> A Mystery Machine
> 1976(ish) Palm Beach
> Fremont, CA
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Re: [GMCnet] Roof Air [message #282099 is a reply to message #282096] Tue, 14 July 2015 14:11 Go to previous messageGo to next message
gbarrow2 is currently offline  gbarrow2   United States
Messages: 765
Registered: February 2004
Location: Lake Almanor, Ca./ Red Bl...
Karma: 3
Senior Member
Larry,
Check your private messages.


Gene Barrow
Lake Almanor, Ca.
1976 Palm Beach
Re: [GMCnet] Roof Air [message #282129 is a reply to message #282096] Tue, 14 July 2015 20:21 Go to previous messageGo to next message
bdub is currently offline  bdub   United States
Messages: 1578
Registered: February 2004
Location: Central Texas
Karma: 5
Senior Member

I'd like to ask you about the control of your unit, Larry. I installed on
a month or so back. It's great and I love the fact that it dials back the
fan speed based on how close it is to the set point. It's very quite on
low speed.
BUT
When it does reach setpoint, after a while, I guess when the compressor
needs to come back on, it completely stops. Goes dead quite for a couple
of seconds, then the compressor starts up and at the same time the fan
comes on high speed. This is alright during the day, but when asleep it
jolts us out of bed. Just can't sleep with it. It even does it when not
in auto mode. We just have to shut it off and depend on the vent.

Have you had any similar issues? I know there is at least one other person
in the Classics with the same experience.

bdub


On Tue, Jul 14, 2015 at 1:15 PM, Larry Davick wrote:

> With all this talk of air conditioning I thought I should report my first
> impressions of the Atwood air conditioner I bought from Jim K some months
> ago. It cools very well and the Onan never even begins to strain. The air
> flow seems very good - lots forward and back. My only complaint is the
> control panel is a flip-down affair that faces the back of the coach when
> down. My fingers just aren’t well suited to flipping that thing down, it
> too close to my eyes to focus on what I’m doing, and if it’s down I
> inevitably smack my head into it. It does have a little hand held remote
> control that I believe works from the front as well as the back, though
> I’ve not used it extensively.
>
> Please don’t take this as a complaint! My old air conditioner had analog
> dials and rotary switches - this is an improvement! And it’s core
> function, cooling the coach, it does very well. It’s quieter than my old
> Intermatic unit, though the old one was low-profile and this is full sized.
>
> The installation was straight-forward and without issues.
>
> Count me as a satisfied customer.
>
> Larry Davick
> A Mystery Machine
> 1976(ish) Palm Beach
> Fremont, CA
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm
Re: [GMCnet] Roof Air [message #282143 is a reply to message #282129] Wed, 15 July 2015 00:08 Go to previous messageGo to next message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
Senior Member
bdub,

I wish I had some brilliant insight that could explain or fix this situation. I’ve only run the air conditioner on manual modes and never let the newfangled computer tell me what it needs to do. Jim K talked to me about this very behavior and I could offer no similar experience.

I do feel that its cooling is very good as enhanced by good airflow.

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA

> On Jul 14, 2015, at 6:21 PM, Billy Massey wrote:
>
> I'd like to ask you about the control of your unit, Larry. I installed on
> a month or so back. It's great and I love the fact that it dials back the
> fan speed based on how close it is to the set point. It's very quite on
> low speed.
> BUT
> When it does reach setpoint, after a while, I guess when the compressor
> needs to come back on, it completely stops. Goes dead quite for a couple
> of seconds, then the compressor starts up and at the same time the fan
> comes on high speed. This is alright during the day, but when asleep it
> jolts us out of bed. Just can't sleep with it. It even does it when not
> in auto mode. We just have to shut it off and depend on the vent.
>
> Have you had any similar issues? I know there is at least one other person
> in the Classics with the same experience.
>
> bdub
>


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
Re: [GMCnet] Roof Air [message #282156 is a reply to message #282143] Wed, 15 July 2015 09:02 Go to previous messageGo to next message
bdub is currently offline  bdub   United States
Messages: 1578
Registered: February 2004
Location: Central Texas
Karma: 5
Senior Member

Thank for your experience, Larry. My unit does the "turn off, turn on High" dance every 5 minutes or so even in manual fan mode no matter which speed is chosen when the compressor needs to restart.

I don't know anything about how these work, but I'm thinking it nearly has to be in the little flip down control module. I think there's no other brains in the outside unit. If I could just get them to send me another one to try it would be so much easier than the whole blasted unit.

Has anyone else had any experience with the new Atwood 15kbtu Roof A/Cs?

bdub


-----Original Message-----
From: Gmclist On Behalf Of Larry Davick
Sent: Wednesday, July 15, 2015 12:08 AM

I wish I had some brilliant insight that could explain or fix this situation. I’ve only run the air conditioner on manual modes and never let the newfangled computer tell me what it needs to do. Jim K talked to me about this very behavior and I could offer no similar experience.

I do feel that its cooling is very good as enhanced by good airflow.


> On Jul 14, 2015, at 6:21 PM, Billy Massey wrote:
>
> I'd like to ask you about the control of your unit, Larry. I
> installed on a month or so back. It's great and I love the fact that
> it dials back the fan speed based on how close it is to the set point.
> It's very quite on low speed.
> BUT
> When it does reach setpoint, after a while, I guess when the
> compressor needs to come back on, it completely stops. Goes dead
> quite for a couple of seconds, then the compressor starts up and at
> the same time the fan comes on high speed. This is alright during the
> day, but when asleep it jolts us out of bed. Just can't sleep with it. It even does it when not
> in auto mode. We just have to shut it off and depend on the vent.
>
> Have you had any similar issues? I know there is at least one other
> person in the Classics with the same experience.




_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm
Re: [GMCnet] Roof Air [message #282165 is a reply to message #282096] Wed, 15 July 2015 10:44 Go to previous messageGo to next message
lqqkatjon is currently offline  lqqkatjon   United States
Messages: 2324
Registered: October 2010
Location: St. Cloud, MN
Karma: 5
Senior Member
I am that other guy experiencing the same performance on my 15.5k atwood as Billy. I do not use it in Auto mode, usually just cool, and fan on low. but it does cycle, stop, and fans/compressor kicks in and out. pretty busy. I have not really paid a huge amount of attention to exacly what it might be trying to do, but I am sure it is the same as Billy's from what he describes.

I just thought it was normal operation, But Billy stated that atwood service told him something was odd. so I am curious how others are operating?

I am personally a very happy customer with the atwood. I went from an original duo therm, to this atwood, and the difference is amazing. This atwood draws very little power, both the onan, and a honda 3000, did not flinch when the A/C comes on and off. It has not been a really hot season here, but so far the front A/C has been able to easily keep up with keeping the coach at 70 degrees, and the hotest outside temps I have used it in were about 90 out. I still have an original A/C in the rear of the coach, but have not needed to turn it on.

I used the heat pump feature on it, one weekend and it ran overnight and kept the coach at 68-69 degrees all night when outside temps dropped to about 50.

monday morning, it was not super hot out, but was humid, and it has a "dry" mode. I ran that, and I think it really helped with the humidity level without dropping the temps in the coach. I only ran that mode for an hour.

But as Billy mentioned, It seems to be a really busy machine, it kicks stuff on and off, and does alot of cycling. I thought that was normal, and part of how it was being "efficient". It is alot louder doing that on the heat pump mode, then the cooling mode. It is so much quieter then the original A/C unit, I have been fine and gotten used to that cycling pretty quick.


I have not had a chance to complete test the power consumption. It does not even make the onan flinch, and the honda 3000 I tried it on, did not really notice it at all. I ran it one whole weekend on a a 25 foot 12-2 cord(hooked to my 15' 50 amp cord attached to the coach), and the cord did not get hot at all. I ran it on a 15 amp outlet at home with that same cord for about an hour, and same results.

I have a line on a dometic LW3000plus (2400 watt running/2800 watt surge) watt generator I might buy on thursday night. I am pretty sure that will run the A/C. I do hope to test it on a honda 2000 soon. I am usually not one to think about buying a non honda or yamaha generator, but this one is at a price I can't pass up.







Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

[Updated on: Wed, 15 July 2015 10:56]

Report message to a moderator

Re: [GMCnet] Roof Air [message #282170 is a reply to message #282143] Wed, 15 July 2015 11:24 Go to previous messageGo to next message
thesmith is currently offline  thesmith   United States
Messages: 589
Registered: February 2015
Location: Cary, NC
Karma: 6
Senior Member
[quote title=ljdavick wrote on Wed, 15 July 2015 01:08]bdub,

"I've only run the air conditioner on manual modes and never let the newfangled computer tell me what it needs to do. Larry Davick"


It helps if you think of computers as attentive but not very bright minions...........


Cary, NC 1978 Center Kitchen Royale.
Re: [GMCnet] Roof Air [message #282172 is a reply to message #282170] Wed, 15 July 2015 11:46 Go to previous messageGo to next message
Scott Nutter is currently offline  Scott Nutter   United States
Messages: 782
Registered: January 2015
Location: Houston/San Diego
Karma: 4
Senior Member
My Atwood is doing the same cycling as Bdub's, in every mode. According to reviews the fan is suppose to run at all times, no cycling on and off. Other than this I love their product. For the taller folks (probably 6'1" and above), get the ceiling mount with the remote controller and then the flip down mode panel will not bump your head.

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas
Re: [GMCnet] Roof Air [message #282173 is a reply to message #282156] Wed, 15 July 2015 12:08 Go to previous messageGo to next message
jw mills is currently offline  jw mills   United States
Messages: 199
Registered: September 2006
Karma: -30
Senior Member
IF you can watch the voltage at the AC unit there may be a voltage sag
when the compressor starts
--
Jim Mills KD0NPU
Greeley, CO
1973 CanyonLands 260 TZE-063V100731(under renovation)

On Wed, 2015-07-15 at 09:02 -0500, Billy Massey wrote:

> Thank for your experience, Larry. My unit does the "turn off, turn on High" dance every 5 minutes or so even in manual fan mode no matter which speed is chosen when the compressor needs to restart.
>
> I don't know anything about how these work, but I'm thinking it nearly has to be in the little flip down control module. I think there's no other brains in the outside unit. If I could just get them to send me another one to try it would be so much easier than the whole blasted unit.
>
> Has anyone else had any experience with the new Atwood 15kbtu Roof A/Cs?
>
> bdub
>
>
> -----Original Message-----
> From: Gmclist On Behalf Of Larry Davick
> Sent: Wednesday, July 15, 2015 12:08 AM
>
> I wish I had some brilliant insight that could explain or fix this situation. I’ve only run the air conditioner on manual modes and never let the newfangled computer tell me what it needs to do. Jim K talked to me about this very behavior and I could offer no similar experience.
>
> I do feel that its cooling is very good as enhanced by good airflow.
>
>
>> On Jul 14, 2015, at 6:21 PM, Billy Massey wrote:
>>
>> I'd like to ask you about the control of your unit, Larry. I
>> installed on a month or so back. It's great and I love the fact that
>> it dials back the fan speed based on how close it is to the set point.
>> It's very quite on low speed.
>> BUT
>> When it does reach setpoint, after a while, I guess when the
>> compressor needs to come back on, it completely stops. Goes dead
>> quite for a couple of seconds, then the compressor starts up and at
>> the same time the fan comes on high speed. This is alright during the
>> day, but when asleep it jolts us out of bed. Just can't sleep with it. It even does it when not
>> in auto mode. We just have to shut it off and depend on the vent.
>>
>> Have you had any similar issues? I know there is at least one other
>> person in the Classics with the same experience.
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Re: [GMCnet] Roof Air [message #282175 is a reply to message #282096] Wed, 15 July 2015 12:19 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
I am arranging to have a new one to replace the defective one N/C as soon
as we get all the info. to the warehouse.
Rest of you that aquired one that is misbehaving should see if you can get
them to do the same for you. Good luck.

On Wed, Jul 15, 2015 at 10:08 AM, mills wrote:

> IF you can watch the voltage at the AC unit there may be a voltage sag
> when the compressor starts
> --
> Jim Mills KD0NPU
> Greeley, CO
> 1973 CanyonLands 260 TZE-063V100731(under renovation)
>
> On Wed, 2015-07-15 at 09:02 -0500, Billy Massey wrote:
>
>> Thank for your experience, Larry. My unit does the "turn off, turn on
> High" dance every 5 minutes or so even in manual fan mode no matter which
> speed is chosen when the compressor needs to restart.
>>
>> I don't know anything about how these work, but I'm thinking it nearly
> has to be in the little flip down control module. I think there's no other
> brains in the outside unit. If I could just get them to send me another
> one to try it would be so much easier than the whole blasted unit.
>>
>> Has anyone else had any experience with the new Atwood 15kbtu Roof A/Cs?
>>
>> bdub
>>
>>
>> -----Original Message-----
>> From: Gmclist On Behalf Of Larry Davick
>> Sent: Wednesday, July 15, 2015 12:08 AM
>>
>> I wish I had some brilliant insight that could explain or fix this
> situation. I’ve only run the air conditioner on manual modes and never let
> the newfangled computer tell me what it needs to do. Jim K talked to me
> about this very behavior and I could offer no similar experience.
>>
>> I do feel that its cooling is very good as enhanced by good airflow.
>>
>>
>>> On Jul 14, 2015, at 6:21 PM, Billy Massey wrote:
>>>
>>> I'd like to ask you about the control of your unit, Larry. I
>>> installed on a month or so back. It's great and I love the fact that
>>> it dials back the fan speed based on how close it is to the set point.
>>> It's very quite on low speed.
>>> BUT
>>> When it does reach setpoint, after a while, I guess when the
>>> compressor needs to come back on, it completely stops. Goes dead
>>> quite for a couple of seconds, then the compressor starts up and at
>>> the same time the fan comes on high speed. This is alright during the
>>> day, but when asleep it jolts us out of bed. Just can't sleep with
> it. It even does it when not
>>> in auto mode. We just have to shut it off and depend on the vent.
>>>
>>> Have you had any similar issues? I know there is at least one other
>>> person in the Classics with the same experience.
>>
>>
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>



--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Re: [GMCnet] Roof Air [message #282181 is a reply to message #282175] Wed, 15 July 2015 13:58 Go to previous messageGo to next message
bdub is currently offline  bdub   United States
Messages: 1578
Registered: February 2004
Location: Central Texas
Karma: 5
Senior Member

Thanks for weighing in guys. Larry, I guess you just got lucky.

Yes Jon, I should receive both inside and outside units, so my first step
will be to see if only changing out the inside with the controller will
solve the problem. (fingers crossed).

Oh, btw, I did watch an amp meter during operation. The unit only pulls
12A when working as hard as it can. When compressor kicks off, it drops to
.4A with only the fan running. Can't detect any sag when compressor kicks
back on. (Fluke digi-meter)

I'll let everyone know what it takes to make it act right as soon as I can.

bdub
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm
Re: [GMCnet] Roof Air [message #282189 is a reply to message #282096] Wed, 15 July 2015 15:29 Go to previous messageGo to next message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
Senior Member
Billy -

The sample speed on the Fluke probably isn't quick enough to pick up the starting surge, particularly if it's small. Get an analog with a 20A scale and you'll see it. You still won't see the true amount, you'd likely need a storage scope for that. But, empirically, it's so small and so quick, the Onan inetia holds it up, so who really cares?
And remember, "If it works, it's a fluke!"

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
Re: [GMCnet] Roof Air [message #282191 is a reply to message #282189] Wed, 15 July 2015 15:54 Go to previous messageGo to next message
k2gkk is currently offline  k2gkk   United States
Messages: 4452
Registered: November 2009
Karma: -8
Senior Member
One of the reasons I just bought a brand new Simpson 260!

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ Since 30 November '53 ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ Member GMCMI and Classics ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
~ ~ ~ '76 ex-Palm Beach ~ ~ ~
~~ k2gkk + hotmail dot com ~~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
______________
|[ ]~~~[][ ][]\
"--OO--[]---O-"



> Date: Wed, 15 Jul 2015 14:29:36 -0600
> To: gmclist@list.gmcnet.org
> From: jhbridges@ymail.com
> Subject: Re: [GMCnet] Roof Air
>
> Billy -
>
> The sample speed on the Fluke probably isn't quick enough to pick up the starting surge, particularly if it's small. Get an analog with a 20A scale
> and you'll see it. You still won't see the true amount, you'd likely need a storage scope for that. But, empirically, it's so small and so quick,
> the Onan inetia holds it up, so who really cares?
> And remember, "If it works, it's a fluke!"
>
> --johnny
>
> --
> '76 23' transmode Norris upfit
> Braselton, Ga.
>
> "Sometimes I wonder what tomorrow's gonna bring when I think about my dirty life and times" --Warren Zevon
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] Roof Air [message #282193 is a reply to message #282191] Wed, 15 July 2015 16:38 Go to previous messageGo to next message
George B. is currently offline  George B.   United States
Messages: 213
Registered: February 2012
Karma: 1
Senior Member
I have two of the New Atwood 15KBTU Heat Pump units, one on each coach. First, I think you can you can change the direction of the drop-down control panel by dropping the plenum and rotating it (the entire plenum) 180. That also puts more cooled air to the rear. Like I said "I Think" you can. When I was doing the work below it seemed like you could change the direction of the plenum. I was looking at this as internally one vent seems larger then the other and maybe wanted to rotate it to blow more air to the rear but I did not try it yet. Check it out
Next, both my units were cycling about every 5 min. Would cool down to the set temp and the compressor would shut down until the inside temp went back to ambient and then cool down and repeat the cycle. Called Atwood customer service and was told "It appears there may warm intake air and cooled exhaust air mixing in the plenum. Check the connections between items 3, 4 & 5 to assure there are not gaps". (items from owners manual picture). I did that and it appeared that the installer did not line up the plenum correctly with the cold air duct therefore it was mixing the cooled air with the intake air. I lined it up carefully and no more problems. Both units were installed by an Atwood Dealer, one in Las Vegas and the other one in Calif. and both made the same mistake. The ceiling plenum can be misaligned by just 1/4 inch and it will cause a problem. Now they both work great!


George Butts Las Vegas Nevada 73 "Custom 26' Q" & 76 23' Birchaven 71 Honda 600 Coupe & 01 Tracker Toads
Re: [GMCnet] Roof Air [message #282209 is a reply to message #282193] Wed, 15 July 2015 20:34 Go to previous messageGo to next message
bdub is currently offline  bdub   United States
Messages: 1578
Registered: February 2004
Location: Central Texas
Karma: 5
Senior Member

Thanks for your response, George.

The plenum is not reversible as the outlet is closer to the rear of the
unit, matching that of the plenum. There doesn't appear to be any blockage
on either side that would make more air come out either end. Registers on
both ends are identical.

The custom cut connecting duct must be seated correctly for it to close up
all the way. If it is too long, it will not come together. If it is long
enough and misaligned, it will not come together. If it is too short, you
got problems and one more chance to get it right.

I did take mine down one time to install ceiling material and made sure a
second time that it was installed correctly. The extension duct is just
the right length and is a slip fit over the adapters on both ends.

http://www.atwoodmobile.com/manuals/ac/MPD_15000_AC_IOM_NON-DUCTED_12_03_2014_rev_8.pdf

bdub .... 5 Atwood A/Cs installed in GMCs and counting.


On Wed, Jul 15, 2015 at 4:38 PM, GEORGE BUTTS wrote:

> I have two of the New Atwood 15KBTU Heat Pump units, one on each coach.
> First, I think you can you can change the direction of the drop-down control
> panel by dropping the plenum and rotating it (the entire plenum) 180.
> That also puts more cooled air to the rear. Like I said "I Think" you can.
> When I was doing the work below it seemed like you could change the
> direction of the plenum. I was looking at this as internally one vent seems
> larger then the other and maybe wanted to rotate it to blow more air to
> the rear but I did not try it yet. Check it out
> Next, both my units were cycling about every 5 min. Would cool down to
> the set temp and the compressor would shut down until the inside temp went
> back to ambient and then cool down and repeat the cycle. Called Atwood
> customer service and was told "It appears there may warm intake air and
> cooled
> exhaust air mixing in the plenum. Check the connections between items 3,
> 4 & 5 to assure there are not gaps". (items from owners manual picture). I
> did that and it appeared that the installer did not line up the plenum
> correctly with the cold air duct therefore it was mixing the cooled air with
> the intake air. I lined it up carefully and no more problems. Both
> units were installed by an Atwood Dealer, one in Las Vegas and the other
> one in
> Calif. and both made the same mistake. The ceiling plenum can be
> misaligned by just 1/4 inch and it will cause a problem. Now they both
> work great!
>
> --
> George Butts
> Las Vegas Nevada
> 73 "Custom 26' Q" & 76 23' Birchaven
> 71 Honda 600 Coupe & 01 Tracker Toads
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm
Re: [GMCnet] Roof Air [message #282219 is a reply to message #282209] Thu, 16 July 2015 00:50 Go to previous messageGo to next message
Scott Nutter is currently offline  Scott Nutter   United States
Messages: 782
Registered: January 2015
Location: Houston/San Diego
Karma: 4
Senior Member
I was able to get hold of a tech at Atwood today. I explained the cycling problem to him. His guess was possible circuit board failure. I was under the impression there was only one circuit board (inside the temp controller flip down panel). He said there is also a second circuit board in the upper main unit. Not wanting to wrestle the A/C off the coach again, I ask him what was the easiest solution from here. He said just to take it to any Atwood service center and they could fix it there under warranty. Well, now we will see how good their warranty program is........

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas
Re: [GMCnet] Roof Air [message #282230 is a reply to message #282189] Thu, 16 July 2015 11:34 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
Johnny Bridges wrote on Wed, 15 July 2015 16:29
Billy -

The sample speed on the Fluke probably isn't quick enough to pick up the starting surge, particularly if it's small. Get an analog with a 20A scale and you'll see it. You still won't see the true amount, you'd likely need a storage scope for that. But, empirically, it's so small and so quick, the Onan inetia holds it up, so who really cares?
And remember, "If it works, it's a fluke!"

--johnny

Johnny,

Right on most counts, but if he can search up either a "Flying Bar" 70 series or a 80 series Flukes, that bar graph will see the spike as it updates 20/sec. The 80s also have a peak capture that I use for starter currents all the time.

Matt - I-30


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
Re: [GMCnet] Roof Air [message #282235 is a reply to message #282096] Thu, 16 July 2015 12:51 Go to previous messageGo to next message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
Senior Member
True dat - but expensive. I do like the peak hold. We bought them because they measure true RMS, necessary in my field of endeavor. And used a 260 (analog) for tuning.

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
Re: [GMCnet] Roof Air [message #282268 is a reply to message #282219] Thu, 16 July 2015 20:51 Go to previous messageGo to previous message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
Senior Member
Scott,

Double Trouble had a Dometic 13,500 BTU unit with an out of balance fan (shipping damage) that the original seller and FedEx
declined to cover so I took it to Channelview RV for repair. I didn't tell them that it was damaged in shipping.

I set up an appointment with them explaining what the problem was and they had a spare fan assembly in stock. They troubleshot the
unit, confirmed it was the fan, contacted Dometic, got the OK to replace it under warranty and did so while I waited. I drove Double
Trouble back to it's storage facility in Humble when they were done several hours later.

Regards,
Rob M.
The Pedantic Mechanic


-----Original Message-----
From: Scott Nutter

I was able to get hold of a tech at Atwood today. I explained the cycling problem to him. His guess was possible circuit board
failure. I was under the impression there was only one circuit board (inside the temp controller flip down panel). He said there is
also a second circuit board in the upper main unit. Not wanting to wrestle the A/C off the coach again, I ask him what was the
easiest solution from here. He said just to take it to any Atwood service center and they could fix it there under warranty. Well,
now we will see how good their warranty program is........
--
Scott


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
Previous Topic: Safety Issue:
Next Topic: Canopy
Goto Forum:
  


Current Time: Tue Nov 05 13:13:04 CST 2024

Total time taken to generate the page: 0.01805 seconds