|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277615 is a reply to message #277613] |
Sun, 10 May 2015 20:45 |
lqqkatjon
Messages: 2324 Registered: October 2010 Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
$180 AAA premier account, could get it hauled 200 miles.
then you have to worry about or pay for the next 100 miles, or you could have a second person get another AAA account to get the last 100 miles in.
probably cheaper then gas.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277619 is a reply to message #277613] |
Sun, 10 May 2015 22:18 |
trapper
Messages: 52 Registered: April 2015 Location: Saskatchewan, Canada
Karma: 0
|
Member |
|
|
www.uship.com
Put a posting and see what you get. If you are not in a hurry you can get a decent deal at times.
AAA is an option as well but they have some restrictions on where they will deliver (i.e., may need to be to an authorized repair facility only)
If it is going to a shop...definitely get the premier AAA and pay the last chunk.
75 Glenbrook
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277620 is a reply to message #277613] |
Sun, 10 May 2015 22:33 |
pzerkel
Messages: 212 Registered: September 2007 Location: Salisbury, IL
Karma: 0
|
Senior Member |
|
|
Not sure what part of central Illinois you are starting from, or even if I can help. But I am in Springfield IL. My contact info is on the blacklist. I may be able to put you in touch with some local tow and/or trucking firms.
Paul Zerkel
'78 Eleganza II
Salisbury IL (near Springfield)
|
|
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277633 is a reply to message #277631] |
Mon, 11 May 2015 07:43 |
jknezek
Messages: 1057 Registered: December 2007
Karma: 5
|
Senior Member |
|
|
thesmith wrote on Mon, 11 May 2015 08:23Its this sort of thing thats going to kill long distance towing for those that really need it..........
Pete
lqqkatjon wrote on Sun, 10 May 2015 20:45$180 AAA premier account, could get it hauled 200 miles.
then you have to worry about or pay for the next 100 miles, or you could have a second person get another AAA account to get the last 100 miles in.
probably cheaper then gas.
AAA has been doing this kind of thing for a long time. If it hasn't killed towing yet, it's not going to. I will say check your AAA RV closely. Here in Alabama (and Florida as well) it's only 100 miles for an RV, 200 miles for a car. But the mileage is dependent on where your AAA comes from, not where you are when you need it.
Thanks,
Jeremy Knezek
1976 Glenbrook
Birmingham, AL
|
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277673 is a reply to message #277619] |
Mon, 11 May 2015 15:30 |
bpimm
Messages: 211 Registered: June 2013 Location: Washougal Washington
Karma: 2
|
Senior Member |
|
|
AAA towed mine to my house no problem.
trapper_canada wrote on Sun, 10 May 2015 20:18www.uship.com
Put a posting and see what you get. If you are not in a hurry you can get a decent deal at times.
AAA is an option as well but they have some restrictions on where they will deliver (i.e., may need to be to an authorized repair facility only)
If it is going to a shop...definitely get the premier AAA and pay the last chunk.
Brian & RaeDean
1973 26' #383
Washougal WA
|
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277703 is a reply to message #277700] |
Mon, 11 May 2015 22:13 |
kerry pinkerton
Messages: 2565 Registered: July 2012 Location: Harvest, Al
Karma: 15
|
Senior Member |
|
|
BobDunahugh wrote on Mon, 11 May 2015 20:57...So much for high volume pumps being able to avoid oil delivery problems. That type of pump just has no value in these Olds engines as we use them.. And I'd like to have someone give a reason of what benefit is gained by there use...
Bob, the value in the high volume oil pump is increased oil pressure IF you have clearanced the thrust bearings like many recommend to increase lube on the thrust bearing. We did that on my 403 when we built it but used the standard pump. Hot oil pressure was 35psi at speed and about 18psi at hot idle. 18psi is plenty at idle but my digipanel beeps at 20psi and that annoyed me. When I had the tranny out, I pulled the pan, changed to a high volume pump AND the hardened oil pump shaft. Now I have 45psi at speed and 25psi at idle.
The high volume pump put enough oil up to the top of the engine to get the gauge reading higher.
Kerry Pinkerton - North Alabama
Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277706 is a reply to message #277703] |
Mon, 11 May 2015 22:49 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Dick Paterson also uses the High volume oil pump in his motor builds that he sell. He is after pressure of course, but he is also after volume of oil passing thru the motor. Can’t argue with success!
JR Wright
78 Buskirk Stretch
75 Avion
Michigan
> On May 11, 2015, at 11:13 PM, Kerry Pinkerton wrote:
>
> BobDunahugh wrote on Mon, 11 May 2015 20:57
>> ...So much for high volume pumps being able to avoid oil delivery problems. That type of pump just has no value in these Olds engines as we use
>> them.. And I'd like to have someone give a reason of what benefit is gained by there use...
>
>
> Bob, the value in the high volume oil pump is increased oil pressure IF you have clearanced the thrust bearings like many recommend to increase lube
> on the thrust bearing. We did that on my 403 when we built it but used the standard pump. Hot oil pressure was 35psi at speed and about 18psi at hot
> idle. 18psi is plenty at idle but my digipanel beeps at 20psi and that annoyed me. When I had the tranny out, I pulled the pan, changed to a high
> volume pump AND the hardened oil pump shaft. Now I have 45psi at speed and 25psi at idle.
>
> The high volume pump put enough oil up to the top of the engine to get the gauge reading higher.
> --
> Kerry Pinkerton
>
> North Alabama
>
> 77 Eleganza II, 403CI, Manny Brakes, 1 ton, tranny, lots of aluminum goodies.
>
> 77 Kingsley by Buskirk. Rear twins/dry bath, EFI Caddy.
>
> Also a 76 Eleganza to be re-bodied as an Art Deco car hauler
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277715 is a reply to message #277700] |
Tue, 12 May 2015 00:30 |
roy1
Messages: 2126 Registered: July 2004 Location: Minden nevada
Karma: 6
|
Senior Member |
|
|
[quote title=BobDunahugh wrote on Mon, 11 May 2015 18:57]Towing plans don't apply here. The coach was bought broken. So far we have a bid of $1,000 from Springfield Ill to Springfield Mo. That price seems far to me. But still checking. As to what I found Sat. The engine has about 8,000 miles on the rebuild. Seems to have a main bearing that died. Nothing is broken. So this will be a simple fix. And the engine bill of material listed a high volume oil pump. So much for high volume pumps being able to avoid oil delivery problems. That type of pump just has no value in these Olds engines as we use them.. And I'd like to have someone give a reason of what benefit is gained by there use. Bob Dunahugh
From: yenko108@hotmail.com
To: gmclist@temp.gmcnet.org
Subject: Any suggestions on getting a GMC hauled 300 miles?
Date: Sun, 10 May 2015 20:04:01 -0500
When you take the bottom end apart it would be interesting as to what was wrong with a main bearing? If it is only one bearing I assume we are talking about the thrust bearing? Also look close at the oil filter relief I am going to pry the relief out of mine as it looks like the disc is worn and leaking by at times. I will fix it of course and put it back in.
Roy Keen
Minden,NV
76 X Glenbrook
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277721 is a reply to message #277700] |
Tue, 12 May 2015 09:16 |
BobDunahugh
Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
No argument. I said last week that I'd get back and report on what I found wrong with Glen, and BJ's coach for the new owners. So I did. And there's a thought out there that a high volume pumps are better for lubricating engines. High volume oil pumps are useful on good condition engines that you add any item that requires oil for that items operation. Like turbo chargers,or an extra oil cooler. Another application would be if you had an engine that has excessive bearing clearance that will let excess oil pass between the bearing and it's mating cam, or crankshaft. It's the only way to increase you oil pressure in a warn out engine because oil demand is higher then the stock pump can deliver. If a high volume oil pump is installed in an engine that is in good condition. The excesses oil that is pumped will just be sent back to the bottom of the oil pan by the relief valve. There will be no extra oil put into suspension to cool the bottom of the pistons. The relief valve wi
ll dump this oil at 35 PSI. This pumping oil back to the pan will waste HP to move this extra oil, and produce extra heat. And put extra load on the oil pump drive that GM didn't design for. So no argument. Just the facts. Bob Dunahugh
From: yenko108@hotmail.com
To: gmclist@temp.gmcnet.org
Subject: RE: Any suggestions on getting a GMC hauled 300 miles?
Date: Mon, 11 May 2015 20:57:39 -0500
Towing plans don't apply here. The coach was bought broken. So far we have a bid of $1,000 from Springfield Ill to Springfield Mo. That price seems far to me. But still checking. As to what I found Sat. The engine has about 8,000 miles on the rebuild. Seems to have a main bearing that died. Nothing is broken. So this will be a simple fix. And the engine bill of material listed a high volume oil pump. So much for high volume pumps being able to avoid oil delivery problems. That type of pump just has no value in these Olds engines as we use them.. And I'd like to have someone give a reason of what benefit is gained by there use. Bob Dunahugh
From: yenko108@hotmail.com
To: gmclist@temp.gmcnet.org
Subject: Any suggestions on getting a GMC hauled 300 miles?
Date: Sun, 10 May 2015 20:04:01 -0500
Needs to be hauled from central Illinois to central Missouri. Engine isn't running. A friend bought it. I'm just trying to help. Bob Dunahugh Member GMCMI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
Re: [GMCnet] Any suggestions on getting a GMC hauled 300 miles? [message #277755 is a reply to message #277613] |
Wed, 13 May 2015 08:26 |
kerry pinkerton
Messages: 2565 Registered: July 2012 Location: Harvest, Al
Karma: 15
|
Senior Member |
|
|
700 is a good price. I paid a grand to have my parts coach hauled about 300 miles from Macon Ga. I used UShip. The only snag was I had to hire a roll back to pick the coach up and get it high enough so it would go on the trailer because the air bags wouldn't air up.
Kerry Pinkerton - North Alabama
Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L
|
|
|
|