|
|
| Re: House AC replacement - top plate question [message #277257 is a reply to message #277253] |
Mon, 04 May 2015 14:02   |
lqqkatjon
Messages: 2324
Registered: October 2010
Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
take a look at my blog. I just did some roof A/C work and took some pictures.
both top and bottom plate need to be removed. the top plate does peal off, but you might need a scraper and mineral spirits to clean off the black goo underneath. nasty stuff, so be careful cleaning up the black goo underneath the top plate.
the bottom plate I cut to remove, or I would of had to cut my headliner an inch. (bottom plate is like 15.5" square, vs the 14 in square opening.
here are some pictures:
http://lqqkatjon.blogspot.com/search?q=atwood+15.5k
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
|
| Re: House AC replacement - top plate question [message #277262 is a reply to message #277257] |
Mon, 04 May 2015 14:50 |
dr.diesel
Messages: 85
Registered: April 2015
Location: The Haute, Indiana
Karma: 0
|
Member |
|
|
Thanks for the picts.
Wow, your not kidding, man just as goo as the day it was put on! ha ha. The one time you wish something had hardened over 35 years and would just flake off.
Yeah, I just cut the inside plate as well with some tin snips, came right out no problem.
77 Kingsley
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
