Home » Public Forums » GMCnet » Front brake hose number
Front brake hose number [message #274151] |
Sat, 21 March 2015 23:04 |
Hal StClair
Messages: 971 Registered: March 2013 Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
Anyone have the part numbers for the one ton front end rubber brake hoses?
Going brain dead but couldn't find the numbers.
Thanks, Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
|
|
|
|
Re: [GMCnet] Front brake hose number [message #274165 is a reply to message #274163] |
Sun, 22 March 2015 08:13 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
There COULD be something different in our installation, but I doubt it
since all of the manufacturers seem to have two different part numbers for
L & R.
Thanks for letting Manny ( & Karen?) know.
Ken H.
On Sun, Mar 22, 2015 at 9:00 AM, John Wright wrote:
> Thanks Ken for the additional part number. The Kit Part List for
> installing the “One Ton Front End Version II latest copyright 2015 listed
> only listed the quantity of 2 of the Dorman H380-533 hoses. I’ve copied
> Manny also on this potential error in the manual “Notes: Kit Parts List”
> section of the installation manual.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Front brake hose number [message #274166 is a reply to message #274165] |
Sun, 22 March 2015 08:33 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Ken, on the MH stock brakes same as Toro but we use two rights cause of the position of the coller for the mounting. Could this be the case also for the one ton?
Ken Henderson wrote on Sun, 22 March 2015 09:13There COULD be something different in our installation, but I doubt it
since all of the manufacturers seem to have two different part numbers for
L & R.
Thanks for letting Manny ( & Karen?) know.
Ken H.
On Sun, Mar 22, 2015 at 9:00 AM, John Wright wrote:
> Thanks Ken for the additional part number. The Kit Part List for
> installing the "One Ton Front End Version II latest copyright 2015 listed
> only listed the quantity of 2 of the Dorman H380-533 hoses. I've copied
> Manny also on this potential error in the manual "Notes: Kit Parts List"
> section of the installation manual.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
C. Boyd
76 Crestmont
East Tennessee
|
|
|
Re: [GMCnet] Front brake hose number [message #274168 is a reply to message #274166] |
Sun, 22 March 2015 08:54 |
Hal StClair
Messages: 971 Registered: March 2013 Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
Thank you folks, I needed that.
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
Re: [GMCnet] Front brake hose number [message #274170 is a reply to message #274166] |
Sun, 22 March 2015 09:04 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Huh? That's the first time I ever heard that. I just looked back at the
spreadsheet Bobby Moore and I made up in Sep 02 on 6-wheel disc brake
upgrades. It's very specific in specifying L & R 80 mm calipers -- not two
rights.
Wouldn't be the first time I've been wrong -- even today -- but I don tink
so!
Ken H.
On Sun, Mar 22, 2015 at 9:33 AM, Charles Boyd
wrote:
> Ken, on the MH stock brakes same as Toro but we use two rights cause of
> the position of the coller for the mounting. Could this be the case also
> for
> the one ton?
>
>
>
> Ken Henderson wrote on Sun, 22 March 2015 09:13
>> There COULD be something different in our installation, but I doubt it
>> since all of the manufacturers seem to have two different part numbers
> for
>> L & R.
>>
>> Thanks for letting Manny ( & Karen?) know.
>>
>> Ken H.
>>
>> On Sun, Mar 22, 2015 at 9:00 AM, John Wright wrote:
>>
>>> Thanks Ken for the additional part number. The Kit Part List for
>>> installing the "One Ton Front End Version II latest copyright 2015
> listed
>>> only listed the quantity of 2 of the Dorman H380-533 hoses. I've
> copied
>>> Manny also on this potential error in the manual "Notes: Kit Parts
> List"
>>> section of the installation manual.
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Front brake hose number [message #274175 is a reply to message #274170] |
Sun, 22 March 2015 09:20 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Ken, I was speaking of the hose only from the original question. I should have been more specific.
Ken Henderson wrote on Sun, 22 March 2015 10:04Huh? That's the first time I ever heard that. I just looked back at the
spreadsheet Bobby Moore and I made up in Sep 02 on 6-wheel disc brake
upgrades. It's very specific in specifying L & R 80 mm calipers -- not two
rights.
Wouldn't be the first time I've been wrong -- even today -- but I don tink
so!
Ken H.
On Sun, Mar 22, 2015 at 9:33 AM, Charles Boyd
wrote:
> Ken, on the MH stock brakes same as Toro but we use two rights cause of
> the position of the coller for the mounting. Could this be the case also
> for
> the one ton?
>
>
>
> Ken Henderson wrote on Sun, 22 March 2015 09:13
>> There COULD be something different in our installation, but I doubt it
>> since all of the manufacturers seem to have two different part numbers
> for
>> L & R.
>>
>> Thanks for letting Manny ( & Karen?) know.
>>
>> Ken H.
>>
>> On Sun, Mar 22, 2015 at 9:00 AM, John Wright wrote:
>>
>>> Thanks Ken for the additional part number. The Kit Part List for
>>> installing the "One Ton Front End Version II latest copyright 2015
> listed
>>> only listed the quantity of 2 of the Dorman H380-533 hoses. I've
> copied
>>> Manny also on this potential error in the manual "Notes: Kit Parts
> List"
>>> section of the installation manual.
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
C. Boyd
76 Crestmont
East Tennessee
|
|
|
Re: [GMCnet] Front brake hose number [message #363677 is a reply to message #274170] |
Sun, 25 April 2021 05:40 |
cadelec
Messages: 303 Registered: September 2011 Location: Brisbane Australia
Karma: 1
|
Senior Member |
|
|
hello Ken Henderson
I am trying to find info on the brake system of Bobby Moore's old coach. I have had one of the middle calipers sieze and ruined a rotor, do you still have the spreadsheet regarding parts used from Bobby, i believe the rotors I need are cadillac but I will need to have them machined here in Australia. do you also have the details of what machining is required
Trevor
Brisbane Australia
Siesta Koala 76 Edgemont (old Bobby Moores)
71 Cadillac Eldo Convert
58 Cadillac Eldorado Brougham Project
|
|
|
Re: [GMCnet] Front brake hose number [message #363678 is a reply to message #274170] |
Sun, 25 April 2021 05:41 |
cadelec
Messages: 303 Registered: September 2011 Location: Brisbane Australia
Karma: 1
|
Senior Member |
|
|
hello Ken Henderson
I am trying to find info on the brake system of Bobby Moore's old coach. I have had one of the middle calipers sieze and ruined a rotor, do you still have the spreadsheet regarding parts used from Bobby, i believe the rotors I need are cadillac but I will need to have them machined here in Australia. do you also have the details of what machining is required
Trevor
Brisbane Australia
Siesta Koala 76 Edgemont (old Bobby Moores)
71 Cadillac Eldo Convert
58 Cadillac Eldorado Brougham Project
|
|
|
[GMCnet] Re: Front brake hose number [message #363679 is a reply to message #363678] |
Sun, 25 April 2021 06:00 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Trevor,
Maybe this will help: Brakes Upgrade Spreadsheet - (gmcmhphotos.com)
It's old, making prices, even in US, absurd. And doesn't seem to include
any drawings, but you should be able to take any required dimensions from
your old parts. IIRC, the only changes to the discs was to enlarge the
center hole to fit the GMC flange and drill the 8-lug bolt pattern.
Good luck!
Ken H.
On Sun, Apr 25, 2021 at 6:41 AM Trevor Pordage
wrote:
> hello Ken Henderson
> I am trying to find info on the brake system of Bobby Moore's old coach. I
> have had one of the middle calipers sieze and ruined a rotor, do you still
> have the spreadsheet regarding parts used from Bobby, i believe the rotors
> I need are cadillac but I will need to have them machined here in
> Australia. do you also have the details of what machining is required
> --
> Trevor
> Brisbane Australia
> Siesta Koala 76 Edgemont (old Bobby Moores)
> 71 Cadillac Eldo Convert
> 58 Cadillac Eldorado Brougham Project
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
[GMCnet] Re: Front brake hose number [message #363695 is a reply to message #363679] |
Sun, 25 April 2021 14:00 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
We established our Dis Brake system as Bobby Moore insisted we adopt it.
Call me and we can supply or give you part #
On Sun, Apr 25, 2021 at 4:01 AM Ken Henderson
wrote:
> Trevor,
>
> Maybe this will help: Brakes Upgrade Spreadsheet - (gmcmhphotos.com)
>
>
> It's old, making prices, even in US, absurd. And doesn't seem to include
> any drawings, but you should be able to take any required dimensions from
> your old parts. IIRC, the only changes to the discs was to enlarge the
> center hole to fit the GMC flange and drill the 8-lug bolt pattern.
>
> Good luck!
>
> Ken H.
>
>
> On Sun, Apr 25, 2021 at 6:41 AM Trevor Pordage
> wrote:
>
>> hello Ken Henderson
>> I am trying to find info on the brake system of Bobby Moore's old coach.
> I
>> have had one of the middle calipers sieze and ruined a rotor, do you
> still
>> have the spreadsheet regarding parts used from Bobby, i believe the
> rotors
>> I need are cadillac but I will need to have them machined here in
>> Australia. do you also have the details of what machining is required
>> --
>> Trevor
>> Brisbane Australia
>> Siesta Koala 76 Edgemont (old Bobby Moores)
>> 71 Cadillac Eldo Convert
>> 58 Cadillac Eldorado Brougham Project
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Re: Front brake hose number [message #363697 is a reply to message #363679] |
Sun, 25 April 2021 15:55 |
cadelec
Messages: 303 Registered: September 2011 Location: Brisbane Australia
Karma: 1
|
Senior Member |
|
|
Thanks ken
that info is of great help
i do have 1 spare rotor that came with the coach but it is so close to the limit of thickness i am reluctant to use it.
i have purchased 2 replacement eldorado rotors from rockauto for 77 dollars australian each delivered.
I hava a Mate that has a small engineering shop and hopefully i will be able to use his lathe and milling machine
thanks trevor
Ken Henderson wrote on Sun, 25 April 2021 21:00Trevor,
Maybe this will help: Brakes Upgrade Spreadsheet - (gmcmhphotos.com)
It's old, making prices, even in US, absurd. And doesn't seem to include
any drawings, but you should be able to take any required dimensions from
your old parts. IIRC, the only changes to the discs was to enlarge the
center hole to fit the GMC flange and drill the 8-lug bolt pattern.
Good luck!
Ken H.
On Sun, Apr 25, 2021 at 6:41 AM Trevor Pordage
wrote:
> hello Ken Henderson
> I am trying to find info on the brake system of Bobby Moore's old coach. I
> have had one of the middle calipers sieze and ruined a rotor, do you still
> have the spreadsheet regarding parts used from Bobby, i believe the rotors
> I need are cadillac but I will need to have them machined here in
> Australia. do you also have the details of what machining is required
> --
> Trevor
> Brisbane Australia
> Siesta Koala 76 Edgemont (old Bobby Moores)
> 71 Cadillac Eldo Convert
> 58 Cadillac Eldorado Brougham Project
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Trevor
Brisbane Australia
Siesta Koala 76 Edgemont (old Bobby Moores)
71 Cadillac Eldo Convert
58 Cadillac Eldorado Brougham Project
|
|
|
[GMCnet] Re: Front brake hose number [message #363703 is a reply to message #363697] |
Sun, 25 April 2021 18:45 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Your front uses a Banjo Bolt to the caliper, look for 3/4 ton chev front
1980 and see that they use the 80mm calipers.
On Sun, Apr 25, 2021 at 1:56 PM Trevor Pordage
wrote:
> Thanks ken
> that info is of great help
> i do have 1 spare rotor that came with the coach but it is so close to the
> limit of thickness i am reluctant to use it.
> i have purchased 2 replacement eldorado rotors from rockauto for 77
> dollars australian each delivered.
> I hava a Mate that has a small engineering shop and hopefully i will be
> able to use his lathe and milling machine
>
> thanks trevor
>
> Ken Henderson wrote on Sun, 25 April 2021 21:00
>> Trevor,
>>
>> Maybe this will help: Brakes Upgrade Spreadsheet - (gmcmhphotos.com)
>>
>>
>> It's old, making prices, even in US, absurd. And doesn't seem to include
>> any drawings, but you should be able to take any required dimensions from
>> your old parts. IIRC, the only changes to the discs was to enlarge the
>> center hole to fit the GMC flange and drill the 8-lug bolt pattern.
>>
>> Good luck!
>>
>> Ken H.
>>
>>
>> On Sun, Apr 25, 2021 at 6:41 AM Trevor Pordage
>> wrote:
>>
>>> hello Ken Henderson
>>> I am trying to find info on the brake system of Bobby Moore's old
> coach. I
>>> have had one of the middle calipers sieze and ruined a rotor, do you
> still
>>> have the spreadsheet regarding parts used from Bobby, i believe the
> rotors
>>> I need are cadillac but I will need to have them machined here in
>>> Australia. do you also have the details of what machining is required
>>> --
>>> Trevor
>>> Brisbane Australia
>>> Siesta Koala 76 Edgemont (old Bobby Moores)
>>> 71 Cadillac Eldo Convert
>>> 58 Cadillac Eldorado Brougham Project
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>
>
> --
> Trevor
> Brisbane Australia
> Siesta Koala 76 Edgemont (old Bobby Moores)
> 71 Cadillac Eldo Convert
> 58 Cadillac Eldorado Brougham Project
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Goto Forum:
Current Time: Fri Oct 04 22:19:30 CDT 2024
Total time taken to generate the page: 0.01998 seconds
|