GMCforum: GMCnet » [GMCnet] Bearing Tool Loaner Program

Home » Public Forums » GMCnet » [GMCnet] Bearing Tool Loaner Program

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Bearing Tool Loaner Program [message #269954]

Sun, 18 January 2015 19:10

bdub

Messages: 1578
Registered: February 2004
Location: Central Texas

Karma: 5

Senior Member

Originating in the Facebook group, "Classic GMC Motorhomes", the Bearing
Tool donated by Alex Ferrara for sharing by the rest of us is ready to go.
I've supplied a special box with cutout foam padding and created a
laminated instruction booklet to go along with it. It will fit into a
medium size Priority Mail box and ship anywhere in the U.S. for $12.65.

Use the email link at http://www.bdub.net/bearingtool/ to request the
tool. A scheduling calendar is available as an aid. All is open to
negotiation.

As soon as you get done and get it all cleaned up, pack it up like you
received it and mail it on to the next person in line.

bdub

https://www.facebook.com/groups/classicgmcmotorhomes/permalink/381711771953366/
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm

Report message to a moderator

Re: [GMCnet] Bearing Tool Loaner Program [message #269956 is a reply to message #269954]

Sun, 18 January 2015 19:22

Kingsley Coach

Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada

Karma: -34

Senior Member

You're gonna make me get an account to see what's going on aren't
you.....

Mike in NS

On Sun, Jan 18, 2015 at 9:10 PM, Billy Massey wrote:

> Originating in the Facebook group, "Classic GMC Motorhomes", the Bearing
> Tool donated by Alex Ferrara for sharing by the rest of us is ready to go.
> I've supplied a special box with cutout foam padding and created a
> laminated instruction booklet to go along with it. It will fit into a
> medium size Priority Mail box and ship anywhere in the U.S. for $12.65.
>
> Use the email link at http://www.bdub.net/bearingtool/ to request the
> tool. A scheduling calendar is available as an aid. All is open to
> negotiation.
>
> As soon as you get done and get it all cleaned up, pack it up like you
> received it and mail it on to the next person in line.
>
> bdub
>
>
> https://www.facebook.com/groups/classicgmcmotorhomes/permalink/381711771953366/
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS

Life is too short to hold a grudge; slash some tires and call it even !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Bearing Tool Loaner Program [message #269979 is a reply to message #269954]

Mon, 19 January 2015 08:31

Olly Schmidt

Messages: 1265
Registered: February 2014
Location: Germany and Scottsville, ...

Karma: 8

Senior Member

Billy,
> Originating in the Facebook group, "Classic GMC Motorhomes", the Bearing
> Tool donated by Alex Ferrara for sharing by the rest of us is ready to go.
>

Great idea! Even if it originated on the FB group :D

--
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA

'76a Eleganza II, VA

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Best regards

Olly Schmidt
PGP Key ID: 0x18a9 3a1f 4196 bf22
'76a Eleganza II, VA
'73 Sequoia, SH, Germany

Report message to a moderator

Previous Topic:	[GMCnet] Frontend Alignment Near Farmville, VA
Next Topic:	Norcold fridge

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 02:40:57 CST 2024

Total time taken to generate the page: 0.07668 seconds