GMCforum: GMCnet » GMC Logo Light Insert for 2 Inch Receiver

Home » Public Forums » GMCnet » GMC Logo Light Insert for 2 Inch Receiver (Anyone have a good recommendation for one?)

Show: Today's Messages :: Polls :: Message Navigator

GMC Logo Light Insert for 2 Inch Receiver [message #268432]

Sun, 28 December 2014 09:57

mickey szilagyi

Messages: 273
Registered: January 2013

Karma: 0

Senior Member

Does anyone have a GMC logo 2 inch trailer hitch tail/brake light insert that you are satisfied with and would recommend? We have looked at a lot of them and are discouraged by the number of bad reviews. There are several GMC Logo inserts made by Bully, two of them as follows:

http://www.amazon.com/dp/B001G4KKOU/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=27ZQO9V73VX51&coliid=I3IBH7APOSKROM

http://www.amazon.com/dp/B0002MAJBQ/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=27ZQO9V73VX51&coliid=ICEE7497SH600

Many reviews comment on the poor quality and lack of longevity of the units. Some have a bunch of small LEDs that apparently don't last. One we found uses a regular 1047 or 1057 bulb that could be replaced with an equivelant LED. The Red lenses do not last either from what people are saying, they wear off. Many units are cheap plastic.

We're trying to spruce up the hitch when it's not in use so any suggestions or comments are greatly appreciated.

Thanks all and hope everyone is having a great Christmas Holiday season.

Mickey 1977 Kingsley, 403, Lansing, MI

Report message to a moderator