403 RH exhaust manifold wanted [message #264982] |
Tue, 28 October 2014 09:13 |
Rick Williams
Messages: 256 Registered: July 2004
Karma: 0
|
Senior Member |
|
|
I posted on the swap meet but if you are like me, you do not look there often. You can find my contact information there. I replaced the gasket 32k miles ago with a Dave Lenzi gasket but the manifold now has a small crack near the top bolt. So, time for a (new) manifold. And no, I do not want to get into headers at this time. Rain and snow are predicted for Thursday and my barn is not yet heated. I do not have time to redo the entire exhaust to accommodate headers. Thanks for the help.
Rick
Rick Williams
Bliss, Michigan
1978 Eleganza II
|
|
|
Re: [GMCnet] 403 RH exhaust manifold wanted [message #264993 is a reply to message #264982] |
Tue, 28 October 2014 11:45 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Rick,
If you really need one quickly and none are available from the other owner who may have one. The only place that would have them in stock is Cinnabar.
http://www.thegmcmotorhomepeople.com
But be prepared to pay their price. You could check with Jim K but he does not list them on his website, but a quick call will see if he has any used right side manifolds. Jim B would be another choice as he may also have some take offs. Let your fingers do the walking
JR Wright
78 Buskirk Stretch
75 Avion
Michigan
> On Oct 28, 2014, at 10:13 AM, Rick Williams wrote:
>
> I posted on the swap meet but if you are like me, you do not look there often. You can find my contact information there. I replaced the gasket 32k
> miles ago with a Dave Lenzi gasket but the manifold now has a small crack near the top bolt. So, time for a (new) manifold. And no, I do not want to
> get into headers at this time. Rain and snow are predicted for Thursday and my barn is not yet heated. I do not have time to redo the entire exhaust
> to accommodate headers. Thanks for the help.
>
> Rick
> --
> Rick Williams
> Bliss, Michigan
> 1978 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
Re: 403 RH exhaust manifold wanted [message #265004 is a reply to message #264982] |
Tue, 28 October 2014 13:25 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Check with Peter Huber
Here is his post....
The following GMC parts are for sale:
Exhaust Manifold L/H and R.H. for 403 used, also # 407108 L.H. for 455;
Exhaust Manifold locks (7); Drive axle bolds (set of small heads); Upper
Control Arms L.H. and R.H. with supplied new Polyurethane Bushings, new Ball
Joints Moog K5238 and new Offset Bushings; Complete new Front End L.H. and
R.H. Assembly (Knuckle, Hub, Disk, Bearings and longer studs for the Alcoa
Wheels-ready to install; Also same as above set but used 14,623 Miles, still
good for another 10,400 Miles; Guard-Exhaust manifold for L.H. 403 Engine;
Steering Tilt and Telescoping unit used.
If you are interested make me a reasonable offer. Shipping is at your
expense. Please contact me at a1huber-AT-prodigy-DOT-net. Thank you.
Regards
Peter D Huber
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|