GMCforum: GMCnet » [GMCnet] Starter Bendix Gear

Home » Public Forums » GMCnet » [GMCnet] Starter Bendix Gear

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Starter Bendix Gear [message #261499]

Wed, 10 September 2014 13:34

Daniel DeLuca

Messages: 120
Registered: June 2014

Karma: 0

Senior Member

I got the Onan 6k working well, but the starter makes a horrible noise. The bendix gear must be only partially extending and grinding somewhat on the flywheel. This is a project I am probably going to put off till the spring, but has any one had any luck cleaning up the old starters and freeing up the gear, or is a new (expensive) starter in my future.

Dan
78 Eleganza II
Allentown, NJ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Starter Bendix Gear [message #261501 is a reply to message #261499]

Wed, 10 September 2014 13:54

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

Daniel DeLuca wrote on Wed, 10 September 2014 13:34

I got the Onan 6k working well, but the starter makes a horrible noise. The bendix gear must be only partially extending and grinding somewhat on the flywheel. This is a project I am probably going to put off till the spring, but has any one had any luck cleaning up the old starters and freeing up the gear, or is a new (expensive) starter in my future.

Dan
78 Eleganza II
Allentown, NJ

Take it out and take it apart. Worst that can happen is you can't fix it and you can't get it back together. If you can't repair it, buy one.

http://www.appliedgmc.com/prod.itml/icOid/928

Report message to a moderator

Re: [GMCnet] Starter Bendix Gear [message #261503 is a reply to message #261501]

Wed, 10 September 2014 14:52

tphipps

Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL

Karma: 9

Senior Member

Did you check the bracket holding the starter? They break pretty easily and the starter motor drops out of contact with the flywheel. Slide Mr. Onan out of his hole and grab the starter and wiggle it. If any movement, the bracket is broken. JmK has new ones. Fast and easy to replace.
Been there and done that.
Tom, MS II

2012 Phoenix Cruiser model 2552 KA4CSG

Report message to a moderator

Re: [GMCnet] Starter Bendix Gear [message #261505 is a reply to message #261503]

Wed, 10 September 2014 15:06

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

tphipps wrote on Wed, 10 September 2014 14:52

Did you check the bracket holding the starter? They break pretty easily and the starter motor drops out of contact with the flywheel. Slide Mr. Onan out of his hole and grab the starter and wiggle it. If any movement, the bracket is broken. JmK has new ones. Fast and easy to replace.
Been there and done that.
Tom, MS II

The starter bracket breaks because the rubber motor mounts have collapsed. If that's the case, he needs 4 new rubber motor mounts.

http://www.appliedgmc.com/prod.itml/icOid/1452

Report message to a moderator

Previous Topic:	GMC Spotted
Next Topic:	Painting the cockpit ceiling

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 28 04:25:18 CDT 2024

Total time taken to generate the page: 0.01220 seconds