| Heater hose ?? [message #258910] |
Fri, 15 August 2014 11:30  |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
I am working on a 76 Birch. Heater hoses have been replaced before and has 1/2 " heater hose going to & from the house water heater behind drivers seat. Is this correct? To replace all I`m thinkin 25' of 5/8 and 10' of 3/4 should be enough? Am I close?
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: Heater hose ?? [message #258929 is a reply to message #258910] |
Fri, 15 August 2014 14:14  |
Carl S.
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
Chuck,
Somewhere on Erf's site, there is a quantity on heater hose for a 26 footer. IIRC, I used almost all of a box (50') of 5/8" and about 6' of 3/4" for my 26 footer. Of course that included the water heater that s located above the left rear wheel well. I'm sure a Birch has different requirements.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
|
|
|
| Re: [GMCnet] Heater hose ?? [message #258996 is a reply to message #258930] |
Sat, 16 August 2014 00:42 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Billy,
That is great bunch of information.Make sure no one will get to your site
and use it.
The hose length on a Birchhave/ Royal is shorter as the water heater is
closer to the engine and easy to measure.
Should this information pop up on another sit, I will hive a good idea
where it was pulled from.
On Fri, Aug 15, 2014 at 12:50 PM, Billy Massey wrote:
> http://www.bdub.net/gmcfaq-body.html#How%20much%20heater%20hose
>
> On Aug 15, 2014 11:31 AM, "Charles Boyd"
> wrote:
>>
>> I am working on a 76 Birch. Heater hoses have been replaced before and
> has 1/2 " heater hose going to & from the house water heater behind drivers
>> seat. Is this correct? To replace all I`m thinkin 25' of 5/8 and 10' of
> 3/4 should be enough? Am I close?
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Heater hose ?? [message #259003 is a reply to message #258996] |
Sat, 16 August 2014 01:27 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
jimk wrote on Sat, 16 August 2014 00:42Billy,
That is great bunch of information.Make sure no one will get to your site
and use it.
The hose length on a Birchhave/ Royal is shorter as the water heater is
closer to the engine and easy to measure.
Should this information pop up on another sit, I will hive a good idea
where it was pulled from.
When I was working, the theft of intellectual capital was always a problem. On almost everything I wrote or assembled from other peoples writings, I had to put a allowable use statement including who was allowed to use it, and how they could use it.
This applied even if the information or document was released into the public domain.
We had a major company that reverse engineered one of our products using a patented encoding technique. We sued and lost because someone in the company wrote a maintenance manual on the product and did not specify exactly who was able to use the document and what they could use it for.
Many things could be copied and redistributed by others as long as the original use statement and source information was included.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
