Home » Public Forums » GMCnet » [GMCnet] ft wheel bearings
| [GMCnet] ft wheel bearings [message #256742] |
Sun, 27 July 2014 18:33  |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
In 1996 I bought my GMC.
One night last week I received a phone call from the seller. It seems he
had, previous to my purchase, sold several GMC's in the province. Since '96
he has been in the diesel pusher re-sale business and had a number of boxes
of GMC parts he was getting rid of and was wondering if I still had mine
and if I wanted the boxes .
He arrived a couple of days later. A great guy and we talked mainly about
GMCs=good and Vogue=not so good.
Among the 5 large boxes of 'stuff' I went looking for a carb gasket for the
Onan tonight. I didn't find a carb gasket but one of the things I did find
find was 2 sets of front wheel bearings, new and in their boxes.
The spacers had .006 engraved on them. It has been a long time since I
thought about these and cannot remember... is .006 the conventional
thinking ??
Thanks in advance.
Mike
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
* This is my second trip through the 60's; the first time the drugs were
better !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] ft wheel bearings [message #256795 is a reply to message #256742] |
Sun, 27 July 2014 23:46  |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mike,
I think the ones for a GMC should be marked 0.009, the 0.006 are for a Toronado???
Regards,
Rob M.
The Pedantic Mechanic
USAussie - Downunder
USA '75 Avion - Double Trouble TZE365V100426
AUS '75 Avion - The Blue Streak TZE365V100428
-----Original Message-----
From: Kingsley Coach
In 1996 I bought my GMC.
One night last week I received a phone call from the seller. It seems he
had, previous to my purchase, sold several GMC's in the province. Since '96
he has been in the diesel pusher re-sale business and had a number of boxes
of GMC parts he was getting rid of and was wondering if I still had mine
and if I wanted the boxes .
He arrived a couple of days later. A great guy and we talked mainly about
GMCs=good and Vogue=not so good.
Among the 5 large boxes of 'stuff' I went looking for a carb gasket for the
Onan tonight. I didn't find a carb gasket but one of the things I did find
find was 2 sets of front wheel bearings, new and in their boxes.
The spacers had .006 engraved on them. It has been a long time since I
thought about these and cannot remember... is .006 the conventional
thinking ??
Thanks in advance.
Mike
--
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] ft wheel bearings [message #256814 is a reply to message #256795] |
Mon, 28 July 2014 06:00 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Tks Rob
I thought there was something, but just couldn't recall.
Mike
On Mon, Jul 28, 2014 at 1:46 AM, Rob Mueller
wrote:
> Mike,
>
> I think the ones for a GMC should be marked 0.009, the 0.006 are for a
> Toronado???
>
> Regards,
> Rob M.
> The Pedantic Mechanic
> USAussie - Downunder
> USA '75 Avion - Double Trouble TZE365V100426
> AUS '75 Avion - The Blue Streak TZE365V100428
>
>
> -----Original Message-----
> From: Kingsley Coach
>
> In 1996 I bought my GMC.
> One night last week I received a phone call from the seller. It seems he
> had, previous to my purchase, sold several GMC's in the province. Since '96
> he has been in the diesel pusher re-sale business and had a number of boxes
> of GMC parts he was getting rid of and was wondering if I still had mine
> and if I wanted the boxes .
> He arrived a couple of days later. A great guy and we talked mainly about
> GMCs=good and Vogue=not so good.
>
> Among the 5 large boxes of 'stuff' I went looking for a carb gasket for the
> Onan tonight. I didn't find a carb gasket but one of the things I did find
> find was 2 sets of front wheel bearings, new and in their boxes.
> The spacers had .006 engraved on them. It has been a long time since I
> thought about these and cannot remember... is .006 the conventional
> thinking ??
>
> Thanks in advance.
>
> Mike
> --
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
* This is my second trip through the 60's; the first time the drugs were
better !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] ft wheel bearings [message #256823 is a reply to message #256795] |
Mon, 28 July 2014 07:54 |
midlf
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
USAussie wrote on Sun, 27 July 2014 23:46Mike,
I think the ones for a GMC should be marked 0.009, the 0.006 are for a Toronado???
Regards,
Rob M.
IIRC wasn't the 0.006 the original dimension and later it was changed to the 0.009 dimension. I thought I heard that here so maybe someone can elaborate.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
|
|
| Re: [GMCnet] ft wheel bearings [message #257428 is a reply to message #256742] |
Fri, 01 August 2014 09:11 |
rjw
Messages: 697
Registered: September 2005
Karma: 4
|
Senior Member |
|
|
Kingsley Coach wrote on Sun, 27 July 2014 19:33In 1996 I bought my GMC.
One night last week I received a phone call from the seller. It seems he
had, previous to my purchase, sold several GMC's in the province. Since '96
he has been in the diesel pusher re-sale business and had a number of boxes
of GMC parts he was getting rid of and was wondering if I still had mine
and if I wanted the boxes .
He arrived a couple of days later. A great guy and we talked mainly about
GMCs=good and Vogue=not so good.
Mike
--
Sounds like Christmas in July for a GMC nut like you. Weren't you surprised that he remembered you after all these years? But then again, we bought our GMC in 1998 and the PO emailed me a few months ago wondering how we were doing with his former baby that he had owned for 18 years.
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
|
|
|
|
| Re: [GMCnet] ft wheel bearings [message #257683 is a reply to message #257428] |
Sun, 03 August 2014 20:19 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Emery
Thanks for the info...I thought there was something but wasn't sure what.
I hope I won't need to get start pulling things apart for a while .
I also thought that maybe I could use the spacers from my currently
installed set...perhaps Not!
I guess I'll worry about that when I have to deal with it...
Mike
On Fri, Aug 1, 2014 at 11:11 AM, RJW wrote:
> Kingsley Coach wrote on Sun, 27 July 2014 19:33
>> In 1996 I bought my GMC.
>> One night last week I received a phone call from the seller. It seems he
>> had, previous to my purchase, sold several GMC's in the province. Since
> '96
>> he has been in the diesel pusher re-sale business and had a number of
> boxes
>> of GMC parts he was getting rid of and was wondering if I still had mine
>> and if I wanted the boxes .
>> He arrived a couple of days later. A great guy and we talked mainly about
>> GMCs=good and Vogue=not so good.
>>
>> Mike
>> --
>
> Sounds like Christmas in July for a GMC nut like you. Weren't you
> surprised that he remembered you after all these years? But then again, we
> bought
> our GMC in 1998 and the PO emailed me a few months ago wondering how we
> were doing with his former baby that he had owned for 18 years.
> --
> Richard
> 76 Palm Beach
> SE Michigan
> www.PalmBeachGMC.com
>
>
> Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator,
> Manny Tranny etc.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
* This is my second trip through the 60's; the first time the drugs were
better !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] ft wheel bearings [message #257684 is a reply to message #256742] |
Sun, 03 August 2014 20:29 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Richard
Christmas in July..exactly!
I still have to find where dozens of seals go. They are in GM boxes with GM
numbers but an old interchange book (supplied) will let me track them down
when I get to it. There are other things that look like air pumps for the
rear suspension for 78's. I have a '77 so it will involve inspecting
another local guys 78.
I can tell you who will be going to the top of my Christmas card list !
Mike
On Sun, Aug 3, 2014 at 10:19 PM, Kingsley Coach
wrote:
> Emery
> Thanks for the info...I thought there was something but wasn't sure what.
> I hope I won't need to get start pulling things apart for a while .
> I also thought that maybe I could use the spacers from my currently
> installed set...perhaps Not!
>
> I guess I'll worry about that when I have to deal with it...
>
> Mike
>
>
> On Fri, Aug 1, 2014 at 11:11 AM, RJW wrote:
>
>> Kingsley Coach wrote on Sun, 27 July 2014 19:33
>>> In 1996 I bought my GMC.
>>> One night last week I received a phone call from the seller. It seems he
>>> had, previous to my purchase, sold several GMC's in the province. Since
>> '96
>>> he has been in the diesel pusher re-sale business and had a number of
>> boxes
>>> of GMC parts he was getting rid of and was wondering if I still had mine
>>> and if I wanted the boxes .
>>> He arrived a couple of days later. A great guy and we talked mainly
>> about
>>> GMCs=good and Vogue=not so good.
>>>
>>> Mike
>>> --
>>
>> Sounds like Christmas in July for a GMC nut like you. Weren't you
>> surprised that he remembered you after all these years? But then again, we
>> bought
>> our GMC in 1998 and the PO emailed me a few months ago wondering how we
>> were doing with his former baby that he had owned for 18 years.
>> --
>> Richard
>> 76 Palm Beach
>> SE Michigan
>> www.PalmBeachGMC.com
>>
>>
>> Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator,
>> Manny Tranny etc.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
>
> * This is my second trip through the 60's; the first time the drugs were
> better !
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
* This is my second trip through the 60's; the first time the drugs were
better !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Tue Nov 19 19:59:10 CST 2024
Total time taken to generate the page: 0.01261 seconds
|
GMCforum
Search
Help
Register
Login
Home
