Onan Plug Wires [message #256002] |
Mon, 21 July 2014 09:04 |
jknezek
Messages: 1057 Registered: December 2007
Karma: 5
|
Senior Member |
|
|
Anyone got a part number handy for a 6K Powerdrawer for the Onan spark plug wires? I can make up my own by matching things up, but it'd be nice to have the actual part number just in case. Can't seem to find it on BDUB's site under the ONAN manual, but that may just be my incompetence.
Thanks,
Jeremy Knezek
1976 Glenbrook
Birmingham, AL
|
|
|
Re: Onan Plug Wires [message #256004 is a reply to message #256002] |
Mon, 21 July 2014 10:19 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Just make up your own. Use resistance wire if you want some ignition noise reduction. I have never tried the straight center conductor wires on an Onan to see if they generate any EMI (interference) or not. They might work.
You really do not want old design carbon resistance replacement wires.
I would use the 7mm silicone outer shell and spiral center conductor type of wire.
That said, I'm still using the OEM wires Onan shipped on this generator 38 or 39 years ago.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|