[GMCnet] Onan Bridge Rectifier [message #252037] |
Thu, 12 June 2014 10:14 |
Terry Taylor
Messages: 113 Registered: October 2004 Location: San Lorenzo, CA
Karma: 0
|
Senior Member |
|
|
I am looking for someone who might loan/give me the plastic
part (preferably with wires attached) that the bridge
rectifier plugs into on the Onan.
What I want to do is to try and model the part in a 3D cad
program and then change the orientation of the connector
holes to match the new bridge rectifiers.
We would then have a part that could be 3D printed (yes, I
have a small 3D printer) and either directly install or be
used as a plug for a mold and cast the part in hard rubber.
If you have one of these that you would be willing to loan
or give, please let me know.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Onan Bridge Rectifier [message #252047 is a reply to message #252037] |
Thu, 12 June 2014 22:08 |
jim kanomata
Messages: 257 Registered: March 2007 Location: fremont,ca
Karma: 12
|
Senior Member |
|
|
Terry,
I'm surprised to see that your asking people on the net when you know better than anyone that we have everything here that I can let you have, as you have always helped us so much.
We have the part with the wires here.
I can drop it in a mailer and get it to you.
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
|
|
|