[GMCnet] Generac PrimePact 50 - fuel solenoid problem [message #251111] |
Sat, 31 May 2014 16:12 |
Ek_Lektro
Messages: 167 Registered: March 2011
Karma: 2
|
Senior Member |
|
|
I found one of these Generac 4800 watt generators for sale used and had Miguel at MGM install it for me. Unfortunately it has a fuel delivery issue, which Miguel says is most likely the fuel solenoid not opening correctly, a very common problem apparently, and the part for this model is rather expensive and hard to find. His suggested remedy would be to disable the spring-back mechanism inside the solenoid by hitting it precisely, inside, with a hammer and nail, so the aperture would stay open. Well, i've tried many times, and this spring just won't quit! Anybody else have this issue before? Any suggestions appreciated, as always :)
Cheers
Greg
26' Eleganza II
SolarSonic / Los Angeles
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Generac PrimePact 50 - fuel solenoid problem [message #251930 is a reply to message #251111] |
Wed, 11 June 2014 06:53 |
MIGUEL MENDEZ
Messages: 179 Registered: August 2004 Location: Montclair, California
Karma: 3
|
Senior Member |
|
|
just an update to gregs fuel pin problem,
He came in yesterday and I fixed the pin open, now the PP50G runs just fine, the problem is, and this is with the new ONANs we install, you HAVE TO RUN THEN EVERY MONTH for 10 or 15 mins, they all have the same fuel cut off sol under the carb, but, if you do not run them monthly, the pin gums up and will not open, it is all in the manuals, it says you need to run them to prevent this from happening
Miguel
1978 Royale Pain in the %$@, side bath w/ a 403 that i love.
GMC name : The other woman
http://www.mgmgmc.com
|
|
|
Re: [GMCnet] Generac PrimePact 50 - fuel solenoid problem [message #251940 is a reply to message #251930] |
Wed, 11 June 2014 09:40 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Same same with the junk 3.6 multispeed obne. I don't think they like alcohol much. You also need to load the genset when you run it. I disconnect the shore power, fire the genset, and run the A/C for about half an hour the first weekend of every month.
--johnny
23' transmode norris
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Generac PrimePact 50 - fuel solenoid problem [message #251941 is a reply to message #251111] |
Wed, 11 June 2014 09:47 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Ditto for the Honda EV's. Run them once a month. They have the same Solenoid on the bottom of the carb.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|