Got My New AC Compressor Today [message #251034] |
Fri, 30 May 2014 14:30 |
Jon payne
Messages: 495 Registered: May 2008
Karma: 1
|
Senior Member |
|
|
Received my new S6 A/C compressor from Applied today....thanks JimK/Nick!
Okay, so the compressor comes serviced with about 7.5 oz of oil. Since I'm am flushing the entire system of all the oil, and replacing the drier, how much oil do I need to add? The MM say if you have debris in the system (Which I do not) it says to flush or replace all the components "as necessary" and add a full 10oz of oil to the compressor. Then it goes on to say to add additional X amount of oil for each component replaced. I will be replacing the drier, so based on how I read the MM, I should add 11oz to the compressor. Do I read that correctly?
Keep in mind that the compressor I am removing has been leaking oil then finally gave up it's charge over the winter. So I don't know how much leaked out therefore I need to flush all of it out and start over.
Jon
http://www.gmcmhphotos.com/photos/data/5436/medium/CompressorOilServicing.jpg
Jon Payne
76 Palm Beach
Westfield,IN
|
|
|