Murray Mansion progress [message #250151] |
Mon, 19 May 2014 19:34 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Its been a while since I added some photo's of Murray's Mansion.
http://www.gmcmhphotos.com/photos/g6483-the-murray-gets-a-home.html
Siding is on, as well as soffit. Went out Saturday to find brick to match the house, but the brick & Stone places were closed for the holiday weekend.
Drywall is started, but maybe will get my floor poured first (frost is still coming out of the backfill!). Scaffolding doesn't roll well on gravel!
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|
|
Re: Murray Mansion progress [message #250179 is a reply to message #250151] |
Tue, 20 May 2014 07:24 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
He put a metal flashing in the valley then did a weave of the shingles as well. I guess he was covering both schools of thought. He never actually asked me which way I wanted.
We bought the house last Sept and there was a new roof put on it in 2012. It has a metal flashing and the shingles are cut and butted to each other, I had never seen that before. I asked the Building Inspector about this while checking on whether I could build the Murray Mansion and he said that was done alot in that area.
As long as it doesn't leak I guess.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|