[GMCnet] Re-doing my waste system [message #248276] |
Wed, 23 April 2014 08:40 |
glwgmc
Messages: 1014 Registered: June 2004
Karma: 10
|
Senior Member |
|
|
That is a great buy, Jim. I will pick one up on our way through Tualatin this weekend just to have a spare. With macerators in both the Royale and the Clasco we are bound to need one sooner or later. $99 is not a whole lot more than a rebuild kit. We are headed to Ellinsburg, WA to watch our grandson perform in the Wash. State High School Music championships. He plays the violin and will be both a soloist and a part of an ensemble. We would love to stop for a short visit at your place but will not have time on this fast 1000 mile round trip jaunt. We will take the Clasco this time.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
Visitors always welcome!
glwork@mac.com
http://jerrywork.com
+++++++++++++++
Message: 11
Date: Tue, 22 Apr 2014 18:17:48 -0700
From: James Hupy <jamesh1296@gmail.com>
Subject: Re: [GMCnet] Re-doing my waste system
To: gmclist@temp.gmcnet.org
Message-ID:
<CALxoeyuvKavixcqKJq534fe2ULgHXCfNSwxAgY1C1hr=yyGOmw@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Todd. Rvpartsoutlet.com has mascerators on sale for $99.00. Most of the
time. They are in Tualatin, Or. All the plumbing stuff you can get at big
box stores except the Valterra valves. They have them too. Look Em up.
Jim Hupy
++++++++++++++
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
Re: [GMCnet] Re-doing my waste system [message #248281 is a reply to message #248276] |
Wed, 23 April 2014 09:33 |
James Hupy
Messages: 6806 Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Jerry, too bad. Would love to see you guys. Guess we will have to wait
until the tail end of the route 66 rolling rally
JIM HUPY
On Apr 23, 2014 6:36 AM, "Work Jerry" <glwork@mac.com> wrote:
> That is a great buy, Jim. I will pick one up on our way through Tualatin
> this weekend just to have a spare. With macerators in both the Royale and
> the Clasco we are bound to need one sooner or later. $99 is not a whole
> lot more than a rebuild kit. We are headed to Ellinsburg, WA to watch our
> grandson perform in the Wash. State High School Music championships. He
> plays the violin and will be both a soloist and a part of an ensemble. We
> would love to stop for a short visit at your place but will not have time
> on this fast 1000 mile round trip jaunt. We will take the Clasco this time.
>
> Jerry
> Jerry Work
> The Dovetail Joint
> Fine furniture designed and hand crafted in the 1907 former Masonic Temple
> building in historic Kerby, OR
> Visitors always welcome!
> glwork@mac.com
> http://jerrywork.com
> +++++++++++++++
> Message: 11
> Date: Tue, 22 Apr 2014 18:17:48 -0700
> From: James Hupy <jamesh1296@gmail.com>
> Subject: Re: [GMCnet] Re-doing my waste system
> To: gmclist@temp.gmcnet.org
> Message-ID:
> <CALxoeyuvKavixcqKJq534fe2ULgHXCfNSwxAgY1C1hr=
> yyGOmw@mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Todd. Rvpartsoutlet.com has mascerators on sale for $99.00. Most of the
> time. They are in Tualatin, Or. All the plumbing stuff you can get at big
> box stores except the Valterra valves. They have them too. Look Em up.
> Jim Hupy
> ++++++++++++++
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|