Home » Public Forums » GMCnet » [GMCnet] Handle for Vent Window
|
Re: [GMCnet] Handle for Vent Window [message #245960 is a reply to message #245956] |
Mon, 31 March 2014 21:05 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Brian,
I have never seen them available new. I'm thinking you will need to find them off of a junk GMC. You might call Jim B. and Jim K. to see if they have them or f they have a lead on who has recently taken a coach apart.
BTW. I never sent you a note. I got your package in the mail over a month ago.
Ken B.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
Re: [GMCnet] Handle for Vent Window [message #245997 is a reply to message #245994] |
Tue, 01 April 2014 08:30 |
sgltrac
Messages: 2797 Registered: April 2011
Karma: 1
|
Senior Member |
|
|
If you are unlikely enough to strike out at the mentioned sources try Jeff at Alex sirum gmc
Todd Sullivan
Sully
77 royale
Seattle
> On Apr 1, 2014, at 5:26 AM, Brian Oakes <brianoakes@hotmail.com> wrote:
>
> Thanks for the links and info!
>
> Does anyone have a picture of what they should look like on a coach handy?
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Robert Mueller
> Sent: Monday, March 31, 2014 9:33 PM
> To: gmclist@temp.gmcnet.org; gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Handle for Vent Window
>
> Brian,
>
> Call Bob Stone in Carbondale, IL 618-964-9124 he bought Michael Bozardt's
> GMRECS stock.
>
> Regards,
> Rob M.
> Sydney, Australia
> AUS '75 Avion - The Blue Streak TZE365V100428 USA '75 Avion - Double Trouble
> TZE365V100426
>
>
> -----Original Message-----
> From: Brian Oakes
>
> Howdy!
>
> My driver/passenger slide windows are missing handles. Does anyone know when
> I can get them?
>
> Thanks!
> Brian Oakes
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
|
Re: [GMCnet] Handle for Vent Window [message #246076 is a reply to message #245960] |
Tue, 01 April 2014 16:43 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Ken Burton wrote on Mon, 31 March 2014 21:05 | Brian,
I have never seen them available new. I'm thinking you will need to find them off of a junk GMC. You might call Jim B. and Jim K. to see if they have them or f they have a lead on who has recently taken a coach apart.
|
Someone answer this for me. Is the latch on the toll booth windows and the latch on the big slider windows the same type on a 1973 coach?
If so, someone with an early coach might have the parts you want if they have replaced their windows with CR Lawrence ones.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: [GMCnet] Handle for Vent Window [message #246077 is a reply to message #246076] |
Tue, 01 April 2014 16:53 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Ken
Yes, on a 73, the cockpit and all other windows have the same latch. The catch attached to the frame is different.
Dennis
quote title=Ken Burton wrote on Tue, 01 April 2014 16:43]Ken Burton wrote on Mon, 31 March 2014 21:05 | Brian,
I have never seen them available new. I'm thinking you will need to find them off of a junk GMC. You might call Jim B. and Jim K. to see if they have them or f they have a lead on who has recently taken a coach apart.
|
Someone answer this for me. Is the latch on the toll booth windows and the latch on the big slider windows the same type on a 1973 coach?
If so, someone with an early coach might have the parts you want if they have replaced their windows with CR Lawrence ones. [/quote]
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
Re: [GMCnet] Handle for Vent Window [message #246155 is a reply to message #246077] |
Wed, 02 April 2014 10:45 |
Brian Oakes
Messages: 23 Registered: October 2013
Karma: 0
|
Junior Member |
|
|
I found my latches. Now I just need to figure out how they mounted in the
vent window. The vent window has 2 holes. Were they just glue'd in? or was
there a bracket on the outside?
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Dennis Sexton
Sent: Tuesday, April 01, 2014 4:54 PM
To: gmclist@temp.gmcnet.org; gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Handle for Vent Window
Ken
Yes, on a 73, the cockpit and all other windows have the same latch. The
catch attached to the frame is different.
Dennis
quote title=Ken Burton wrote on Tue, 01 April 2014 16:43]Ken Burton wrote on
Mon, 31 March 2014 21:05
> Brian,
>
> I have never seen them available new. I'm thinking you will need to find
them off of a junk GMC. You might call Jim B. and Jim K. to see if they
have them or f they have a lead on who has recently taken a coach apart.
Someone answer this for me. Is the latch on the toll booth windows and the
latch on the big slider windows the same type on a 1973 coach?
If so, someone with an early coach might have the parts you want if they
have replaced their windows with CR Lawrence ones. [/quote]
--
Dennis S
73 Painted Desert 230
Germantown, TN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Re: [GMCnet] Handle for Vent Window [message #246158 is a reply to message #246155] |
Wed, 02 April 2014 11:05 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Brian, I used well nuts to replace my fasteners for the window catch.
Mcmaster-Carr web site
*Rubber-Insulated Rivet Nuts*
Your fastener sets the insert as you screw it into thin and brittle
materials -- no special tools needed.
Rubber-insulated brass nuts, also known as well nuts, seal out moisture and
reduce vibration.
[image: For technical drawings and 3-D models, click on a part number.]For
technical drawings and 3-D models, click on a part number.
*Flange*
Thread
Material
Thick.
Hole
Size
Dia.
Ht.
O'all
Lg.
Pkg.
Qty.
Pkg.
6-32
1/64"-5/32"
5/16"
0.452"
0.062"
0.499"
25
93495A120 <http://www.mcmaster.com/#93495A120>
$14.00
Home depot and Lowes also carry the well nuts so you don't have to buy the
lot of 25.
Use a stainless flat head 6-32 screw to fasten latch to well nut.
On Wed, Apr 2, 2014 at 9:45 AM, Brian Oakes <brianoakes@hotmail.com> wrote:
> I found my latches. Now I just need to figure out how they mounted in the
> vent window. The vent window has 2 holes. Were they just glue'd in? or was
> there a bracket on the outside?
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Dennis Sexton
> Sent: Tuesday, April 01, 2014 4:54 PM
> To: gmclist@temp.gmcnet.org; gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Handle for Vent Window
>
>
>
> Ken
> Yes, on a 73, the cockpit and all other windows have the same latch. The
> catch attached to the frame is different.
>
> Dennis
>
> quote title=Ken Burton wrote on Tue, 01 April 2014 16:43]Ken Burton wrote
> on
> Mon, 31 March 2014 21:05
> > Brian,
> >
> > I have never seen them available new. I'm thinking you will need to find
> them off of a junk GMC. You might call Jim B. and Jim K. to see if they
> have them or f they have a lead on who has recently taken a coach apart.
>
>
>
> Someone answer this for me. Is the latch on the toll booth windows and the
> latch on the big slider windows the same type on a 1973 coach?
>
> If so, someone with an early coach might have the parts you want if they
> have replaced their windows with CR Lawrence ones. [/quote]
>
> --
> Dennis S
> 73 Painted Desert 230
> Germantown, TN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
Re: [GMCnet] Handle for Vent Window [message #246160 is a reply to message #246158] |
Wed, 02 April 2014 11:10 |
Brian Oakes
Messages: 23 Registered: October 2013
Karma: 0
|
Junior Member |
|
|
Ok I think I am following now. Appreciate the info the links everyone!
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bruce Hart
Sent: Wednesday, April 02, 2014 11:06 AM
To: gmclist@temp.gmcnet.org; gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Handle for Vent Window
Brian, I used well nuts to replace my fasteners for the window catch.
Mcmaster-Carr web site
*Rubber-Insulated Rivet Nuts*
Your fastener sets the insert as you screw it into thin and brittle
materials -- no special tools needed.
Rubber-insulated brass nuts, also known as well nuts, seal out moisture and
reduce vibration.
[image: For technical drawings and 3-D models, click on a part number.]For
technical drawings and 3-D models, click on a part number.
*Flange*
Thread
Material
Thick.
Hole
Size
Dia.
Ht.
O'all
Lg.
Pkg.
Qty.
Pkg.
6-32
1/64"-5/32"
5/16"
0.452"
0.062"
0.499"
25
93495A120 <http://www.mcmaster.com/#93495A120>
$14.00
Home depot and Lowes also carry the well nuts so you don't have to buy the
lot of 25.
Use a stainless flat head 6-32 screw to fasten latch to well nut.
On Wed, Apr 2, 2014 at 9:45 AM, Brian Oakes <brianoakes@hotmail.com> wrote:
> I found my latches. Now I just need to figure out how they mounted in
> the vent window. The vent window has 2 holes. Were they just glue'd
> in? or was there a bracket on the outside?
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Dennis Sexton
> Sent: Tuesday, April 01, 2014 4:54 PM
> To: gmclist@temp.gmcnet.org; gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Handle for Vent Window
>
>
>
> Ken
> Yes, on a 73, the cockpit and all other windows have the same latch.
> The catch attached to the frame is different.
>
> Dennis
>
> quote title=Ken Burton wrote on Tue, 01 April 2014 16:43]Ken Burton
> wrote on Mon, 31 March 2014 21:05
> > Brian,
> >
> > I have never seen them available new. I'm thinking you will need to
> > find
> them off of a junk GMC. You might call Jim B. and Jim K. to see if
> they have them or f they have a lead on who has recently taken a coach
apart.
>
>
>
> Someone answer this for me. Is the latch on the toll booth windows
> and the latch on the big slider windows the same type on a 1973 coach?
>
> If so, someone with an early coach might have the parts you want if
> they have replaced their windows with CR Lawrence ones. [/quote]
>
> --
> Dennis S
> 73 Painted Desert 230
> Germantown, TN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Goto Forum:
Current Time: Fri Oct 04 22:15:34 CDT 2024
Total time taken to generate the page: 0.03210 seconds
|