[GMCnet] Photo's that show area removed for 16" steel wheels [message #244011] |
Mon, 17 March 2014 21:01 |
BobDunahugh
Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
Below is the E-mail I just sent to Rob Mueller with photo's. Someone e-mailed me to say that they would post the photo's for me. If that person could get back to me. That would be great. If anyone wants the photo's E-mailed. Let me know.Bob Dunahugh
From: yenko108@hotmail.com
To: robmueller@iinet.net.au
Subject: Photo's that show area removed
Date: Mon, 17 Mar 2014 20:39:43 -0500
These are shots of the OEM caliper just before I removed it to put the 80 mm caliper on. I'm putting 6 wheel disc on at this time. As you can see at the top. Above the caliper pin. Is the area that I removed some material. That area was shaped to match the contour of the main body of the OEM caliper. The same shaping was done at the lower caliper pin.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|