|
|
| Re: [GMCnet] Part Number of the 16 inch steel wheels I used [message #243638 is a reply to message #243440] |
Sat, 15 March 2014 17:20  |
BobDunahugh
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
I'll go and get the brand, and part Number off the one's I used on my 78. Will do it today or tomorrow.Bob Dunahugh.
Above is the E-mail I sent out two days ago to all of you. Richard has those rims. They're off the GMC now. He said he would check for me. He called me and said that he couldn't find the info needed. I know it can be hard to see due to the paint. So does anyone know the location of that part number in relation to the valve stem hole? And, front, or back. Next. I have my front tires off of my GMC that I had the steel 16 inch rims on. I just examined the calipers to see if I had to do any grinding to get the steel rims to fit. It looks like I may have. If I did. It had to be a vary small amount. And if I did. It would have been in an area that wouldn't have weakened the casting. Sorry for the delay. I need to help figure this out for sure. None of this, I think it will work. Bob Dunahugh78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
