Home » Public Forums » GMCnet » Oven knobs
Oven knobs [message #242420] |
Wed, 05 March 2014 21:00 |
sgltrac86
Messages: 49 Registered: April 2011 Location: BELLEVUE WA
Karma: 0
|
Member |
|
|
Getting ready to install my new cabinets and dragged the original black Magic Chef oven with pho stainless four burner cooktop down from the shelf so my cabinet guy could measure it and I realized that putting that stove back with my all of my new interior would be like putting lipstick on a pig(no pun intended). The surround for the burners is plated with something to appear like stainless but it had rust pits which would not polish out with ultra fine steel wool. I dismantled it to take the plated parts to my plater for a quote along with the rusted rear heat deflector and hinged burner cover. Time and cost made plating a not so great option so next stop was the powder coater. He would have been half the money and time but thought that powder was not a good application for the burner surround. He suggested a light dusting of the burner surround with glass beads. I brought it all back home and worked the surround with fine glass and it looked a little better. Then I hit it with 0000 steel wool and that softened the texture and evened out the mottling from the glass beads. Then I worked it hard with a mini wool pad and heavy 3m buffing compound and washed it. It now looks ok but not great. The panel which houses the controls can be stripped and painted so I'm good there. The hinged cover can be powder coated if I can't live with the wear marks and spotty surface rust on the underside. The control knobs were in decent shape except for on that looke like it was folded like A fortune cookie and then straightened back out. Well, I could take a few minutes and clean the five knobs by hand with ammonia free glass cleaner or I could throw them in the dishwasher and even have them sanitized. Win win right? No. Do not put your oven control knobs in the dishwasher unless you want them to look 100 years old rather than 40. I know, I know you are thinking that it's because the dishwasher is some low grade non smart unit but it's a state of the art Miele.
Anyone upgrade or delete their original Magic Chef oven and want to sell some knobs? Or burner surround and range cover?
Sully
77 Eleganza 2 ( Recherché )
Seattle, wa
|
|
|
Re: [GMCnet] Oven knobs [message #242449 is a reply to message #242420] |
Thu, 06 March 2014 06:22 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Emery pointed me to a vendor that supplied a much better cover for the
stove. it was one piece and covered all burners, and fit the original
holes.
maybe he knows were we can get one now, i need one for my 23
erf
On Wed, Mar 5, 2014 at 7:00 PM, Todd Sullivan <sgltrac@comcast.net> wrote:
>
>
> Getting ready to install my new cabinets and dragged the original black
> Magic Chef oven with pho stainless four burner cooktop down from the shelf
> so my cabinet guy could measure it and I realized that putting that stove
> back with my all of my new interior would be like putting lipstick on a
> pig(no pun intended). The surround for the burners is plated with something
> to appear like stainless but it had rust pits which would not polish out
> with ultra fine steel wool. I dismantled it to take the plated parts to my
> plater for a quote along with the rusted rear heat deflector and hinged
> burner cover. Time and cost made plating a not so great option so next stop
> was the powder coater. He would have been half the money and time but
> thought that powder was not a good application for the burner surround. He
> suggested a light dusting of the burner surround with glass beads. I
> brought it all back home and worked the surround with fine glass and it
> looked a little better. Then I hit it w
> ith 0000 steel wool and that softened the texture and evened out the
> mottling from the glass beads. Then I worked it hard with a mini wool pad
> and heavy 3m buffing compound and washed it. It now looks ok but not great.
> The panel which houses the controls can be stripped and painted so I'm good
> there. The hinged cover can be powder coated if I can't live with the wear
> marks and spotty surface rust on the underside. The control knobs were in
> decent shape except for on that looke like it was folded like A fortune
> cookie and then straightened back out. Well, I could take a few minutes and
> clean the five knobs by hand with ammonia free glass cleaner or I could
> throw them in the dishwasher and even have them sanitized. Win win right?
> No. Do not put your oven control knobs in the dishwasher unless you want
> them to look 100 years old rather than 40. I know, I know you are thinking
> that it's because the dishwasher is some low grade non smart unit but it's
> a state of the art Miele.
>
> Anyone upgrade or delete their original Magic Chef oven and want to sell
> some knobs? Or burner surround and range cover?
> --
> Sully
> 77 Royale
> Seattle, wa
> Future land speed record holder fully equipped motorhome (bucket list)
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
"Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Oven knobs [message #242451 is a reply to message #242420] |
Thu, 06 March 2014 06:55 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I have one out of an SOB, in dirty condition. You could buy a new one for the cost of sending it from Georgia to Seattle, unfortunately.
--johnny
________________________________
From: Todd Sullivan <sgltrac@comcast.net>
To: gmclist@temp.gmcnet.org
Sent: Wednesday, March 5, 2014 10:00 PM
Subject: [GMCnet] Oven knobs
Getting ready to install my new cabinets and dragged the original black Magic Chef oven with pho stainless four burner cooktop down from the shelf so my cabinet guy could measure it and I realized that putting that stove back with my all of my new interior would be like putting lipstick on a pig(no pun intended). The surround for the burners is plated with something to appear like stainless but it had rust pits which would not polish out with ultra fine steel wool. I dismantled it to take the plated parts to my plater for a quote along with the rusted rear heat deflector and hinged burner cover. Time and cost made plating a not so great option so next stop was the powder coater. He would have been half the money and time but thought that powder was not a good application for the burner surround. He suggested a light dusting of the burner surround with glass beads. I brought it all back home and worked the surround with fine glass and it looked a little
better. Then I hit it w
ith 0000 steel wool and that softened the texture and evened out the mottling from the glass beads. Then I worked it hard with a mini wool pad and heavy 3m buffing compound and washed it. It now looks ok but not great. The panel which houses the controls can be stripped and painted so I'm good there. The hinged cover can be powder coated if I can't live with the wear marks and spotty surface rust on the underside. The control knobs were in decent shape except for on that looke like it was folded like A fortune cookie and then straightened back out. Well, I could take a few minutes and clean the five knobs by hand with ammonia free glass cleaner or I could throw them in the dishwasher and even have them sanitized. Win win right? No. Do not put your oven control knobs in the dishwasher unless you want them to look 100 years old rather than 40. I know, I know you are thinking that it's because the dishwasher is some low grade non smart unit but it's a
state of the art Miele.
Anyone upgrade or delete their original Magic Chef oven and want to sell some knobs? Or burner surround and range cover?
--
Sully
77 Royale
Seattle, wa
Future land speed record holder fully equipped motorhome (bucket list)
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Oven knobs [message #242452 is a reply to message #242451] |
Thu, 06 March 2014 07:48 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Johnny would you have the cast iron pan supports that fit on top of the
burners.
I received a Magic Chef oven from Gene Barrow in Feb, 20012. he shipped it
through Grey Hound and it cost 80 bucks. It was in great shape and well
worth the shipping fees.
On Thu, Mar 6, 2014 at 5:55 AM, Johnny Bridges <jhbridges@ymail.com> wrote:
> I have one out of an SOB, in dirty condition. You could buy a new one for
> the cost of sending it from Georgia to Seattle, unfortunately.
>
> --johnny
>
>
> ________________________________
> From: Todd Sullivan <sgltrac@comcast.net>
> To: gmclist@temp.gmcnet.org
> Sent: Wednesday, March 5, 2014 10:00 PM
> Subject: [GMCnet] Oven knobs
>
>
>
>
> Getting ready to install my new cabinets and dragged the original black
> Magic Chef oven with pho stainless four burner cooktop down from the shelf
> so my cabinet guy could measure it and I realized that putting that stove
> back with my all of my new interior would be like putting lipstick on a
> pig(no pun intended). The surround for the burners is plated with something
> to appear like stainless but it had rust pits which would not polish out
> with ultra fine steel wool. I dismantled it to take the plated parts to my
> plater for a quote along with the rusted rear heat deflector and hinged
> burner cover. Time and cost made plating a not so great option so next stop
> was the powder coater. He would have been half the money and time but
> thought that powder was not a good application for the burner surround. He
> suggested a light dusting of the burner surround with glass beads. I
> brought it all back home and worked the surround with fine glass and it
> looked a little
> better. Then I hit it w
> ith 0000 steel wool and that softened the texture and evened out the
> mottling from the glass beads. Then I worked it hard with a mini wool pad
> and heavy 3m buffing compound and washed it. It now looks ok but not great.
> The panel which houses the controls can be stripped and painted so I'm good
> there. The hinged cover can be powder coated if I can't live with the wear
> marks and spotty surface rust on the underside. The control knobs were in
> decent shape except for on that looke like it was folded like A fortune
> cookie and then straightened back out. Well, I could take a few minutes and
> clean the five knobs by hand with ammonia free glass cleaner or I could
> throw them in the dishwasher and even have them sanitized. Win win right?
> No. Do not put your oven control knobs in the dishwasher unless you want
> them to look 100 years old rather than 40. I know, I know you are thinking
> that it's because the dishwasher is some low grade non smart unit but it's a
> state of the art Miele.
>
> Anyone upgrade or delete their original Magic Chef oven and want to sell
> some knobs? Or burner surround and range cover?
> --
> Sully
> 77 Royale
> Seattle, wa
> Future land speed record holder fully equipped motorhome (bucket list)
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
Re: Oven knobs [message #242454 is a reply to message #242420] |
Thu, 06 March 2014 07:57 |
appie
Messages: 902 Registered: April 2013 Location: denmark
Karma: 2
|
Senior Member |
|
|
Iff you have a old oven/range without safety valve ( the one that closes when the flame is blown out) then this is the time to replace it !
Gasoven safety has come a long way in 40 years
Appie
eleganza 76 "Olga" now sadly sold
6 wheel discbrake
Quadrabags
Springfield stage 2 462 olds
Manny tranny
( pictures at http://www.gmcmhphotos.com/photos/g6489-olga.html
Fulltiming in Europe july 2014 til july 2016
Denmark
|
|
|
Re: [GMCnet] Oven knobs [message #242495 is a reply to message #242452] |
Thu, 06 March 2014 11:55 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Yeh, they're on there. The stove is complete, I took it out of the SOB and it'suin a shed out back. Badly needs cleaning, but it's all there. I dunno they're cast iron or bent strap steel like the newer ones though,. I'll look this weekend.
--johnny
________________________________
From: Bruce Hart <hartsgmc@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Thursday, March 6, 2014 8:48 AM
Subject: Re: [GMCnet] Oven knobs
Johnny would you have the cast iron pan supports that fit on top of the
burners.
I received a Magic Chef oven from Gene Barrow in Feb, 20012. he shipped it
through Grey Hound and it cost 80 bucks. It was in great shape and well
worth the shipping fees.
On Thu, Mar 6, 2014 at 5:55 AM, Johnny Bridges <jhbridges@ymail.com> wrote:
> I have one out of an SOB, in dirty condition. You could buy a new one for
> the cost of sending it from Georgia to Seattle, unfortunately.
>
> --johnny
>
>
> ________________________________
> From: Todd Sullivan <sgltrac@comcast.net>
> To: gmclist@temp.gmcnet.org
> Sent: Wednesday, March 5, 2014 10:00 PM
> Subject: [GMCnet] Oven knobs
>
>
>
>
> Getting ready to install my new cabinets and dragged the original black
> Magic Chef oven with pho stainless four burner cooktop down from the shelf
> so my cabinet guy could measure it and I realized that putting that stove
> back with my all of my new interior would be like putting lipstick on a
> pig(no pun intended). The surround for the burners is plated with something
> to appear like stainless but it had rust pits which would not polish out
> with ultra fine steel wool. I dismantled it to take the plated parts to my
> plater for a quote along with the rusted rear heat deflector and hinged
> burner cover. Time and cost made plating a not so great option so next stop
> was the powder coater. He would have been half the money and time but
> thought that powder was not a good application for the burner surround. He
> suggested a light dusting of the burner surround with glass beads. I
> brought it all back home and worked the surround with fine glass and it
> looked a little
> better. Then I hit it w
> ith 0000 steel wool and that softened the texture and evened out the
> mottling from the glass beads. Then I worked it hard with a mini wool pad
> and heavy 3m buffing compound and washed it. It now looks ok but not great.
> The panel which houses the controls can be stripped and painted so I'm good
> there. The hinged cover can be powder coated if I can't live with the wear
> marks and spotty surface rust on the underside. The control knobs were in
> decent shape except for on that looke like it was folded like A fortune
> cookie and then straightened back out. Well, I could take a few minutes and
> clean the five knobs by hand with ammonia free glass cleaner or I could
> throw them in the dishwasher and even have them sanitized. Win win right?
> No. Do not put your oven control knobs in the dishwasher unless you want
> them to look 100 years old rather than 40. I know, I know you are thinking
> that it's because the dishwasher is some low grade non smart unit but it's a
> state of the art Miele.
>
> Anyone upgrade or delete their original Magic Chef oven and want to sell
> some knobs? Or burner surround and range cover?
> --
> Sully
> 77 Royale
> Seattle, wa
> Future land speed record holder fully equipped motorhome (bucket list)
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Oven knobs [message #242512 is a reply to message #242495] |
Thu, 06 March 2014 15:07 |
mikethebike
Messages: 331 Registered: January 2014
Karma: 0
|
Senior Member |
|
|
We replaced the kitchen with granite, round under mount sink, new faucet, and a 2 burner, piezoelectric ignition cook top. This did 3 things; allowed us to have a real drawer built with soft close rails and we now have counter space and can use the drop leaf for a cockpit table. Now we just need to locate a black convection micro way oven to replace the white one.
[Updated on: Thu, 06 March 2014 15:07] Report message to a moderator
|
|
|
Re: [GMCnet] Oven knobs [message #242521 is a reply to message #242512] |
Thu, 06 March 2014 15:48 |
Jerry Wheeler
Messages: 246 Registered: January 2013
Karma: 2
|
Senior Member |
|
|
And I even went further; I took out the 4 burner cook top and replaced the
counter top with a granite counter top, square under mount sink, new
faucet. Also took out the microwave under the 4 burner cook top and to
make more space available and took out the hot water heater for even more
storage space. I put a new microwave above the fridge and an "on demand"
water heater behind the fridge. Added a nice big roll out drawer where the
microwave used to be. To cook, I put a quick connect/disconnect propane
outlet to access the propane and now use a portable propane cook top; also
added a new 120v outlet where I can hook our portable induction cook top.
Now have much more counter top space, which is what the wife wanted. And
it looks nice.
JR Wheeler 78 Royale NC/OR
On Thu, Mar 6, 2014 at 4:07 PM, mike foster <mafoster1@bellsouth.net> wrote:
>
>
> We replaced the kitchen with granite, round under mount sink, new faucet,
> and a 2 burner, piezoelectric ignition cook top. This did 2 things; allowed
> us to have a real drawer built with soft close rails and we now have
> counter space and can use the drop leaf for a cockpit table. Now we just
> need to locate a black convection micro way oven to replace the white one.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: Oven knobs [message #242528 is a reply to message #242420] |
Thu, 06 March 2014 16:27 |
Larry
Messages: 2875 Registered: January 2004 Location: Menomonie, WI
Karma: 10
|
Senior Member |
|
|
[/quote]
Anyone upgrade or delete their original Magic Chef oven and want to sell some knobs? Or burner surround and range cover? [/quote]
Sully,
I took my Magic Chef out in favor of drawers and a cook top. I still have the knobs, but am nowhere near home right now. If you don't have replacements by April 17th (when I get home) remind me and I will send the knobs to you.
Larry
78 Royale w/500 Caddy
Menomonie, WI.
|
|
|
Re: [GMCnet] Oven knobs [message #242544 is a reply to message #242512] |
Thu, 06 March 2014 18:25 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mike,
Here you go!
http://www.gmcmhphotos.com/photos/showfull.php?photo=53464
http://www.gmcmhphotos.com/photos/showfull.php?photo=53465
This is an old spreadsheet and I have no idea if the links still work.
Regards,
Rob M.
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: mike foster
We replaced the kitchen with granite, round under mount sink, new faucet, and a 2 burner, piezoelectric ignition cook top. This did
2 things; allowed us to have a real drawer built with soft close rails and we now have counter space and can use the drop leaf for a
cockpit table. Now we just need to locate a black convection micro way oven to replace the white one.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] Oven knobs [message #242561 is a reply to message #242528] |
Thu, 06 March 2014 19:45 |
sgltrac
Messages: 2797 Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Thanks Larry !!
Todd Sullivan
Sully
77 royale
Seattle
> On Mar 6, 2014, at 2:27 PM, Larry <weidnerl@wwt.net> wrote:
>
>
>
>
> [/quote]
> Anyone upgrade or delete their original Magic Chef oven and want to sell some knobs? Or burner surround and range cover? [/quote]
>
> Sully,
> I took my Magic Chef out in favor of drawers and a cook top. I still have the knobs, but am nowhere near home right now. If you don't have replacements by April 17th (when I get home) remind me and I will send the knobs to you.
>
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
Goto Forum:
Current Time: Mon Oct 07 01:27:59 CDT 2024
Total time taken to generate the page: 0.01076 seconds
|