|
|
Re: [GMCnet] Yenko 427 engine on eBay (no GMC content) [message #241605 is a reply to message #241497] |
Wed, 26 February 2014 23:36 |
Kosier
Messages: 834 Registered: February 2008
Karma: 1
|
Senior Member |
|
|
Keeper,
You're right about the part about not being with the car. But you're
wrong on the word cheap. The bare block is worth 3 to 4k before
you send it to me for resurfacing and restamping to match the car.
Now, as of last May, I am out of that business, but before that I
was the premiere man in the country on resurfacing and restamping
Chevrolet engine blocks.
At the same time, if you had the car, that block would not pass judging.
Chevrolet Gang-stamped the VIN number and that one is obviously
hand stamped. Also the pad on the right front does not match the surface
at the edge of the head. Actually, it has no surface definition at all.
Possibly
a victim of "Mr. Belt-Sander". Just my formerly semi-Professional opinion.
Gary Kosier
77 PB w/500 Cad
Newark, Oh
-----Original Message----
From: anthony ezzo
Sent: Wednesday, February 26, 2014 1:27 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Yenko 427 engine on eBay (no GMC content)
$25000 ....Without the car its just another cheap old engine that needs
rebuilding constantly!
--
77 455 Elaganza II and 67 Animal, Built 500 Powered Eldo
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Yenko 427 engine on eBay (no GMC content) [message #241621 is a reply to message #241605] |
Thu, 27 February 2014 06:42 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
And we'd never never reset an odometer either, would we??
--johnny
________________________________
From: Kosier <gkosier@roadrunner.com>
To: gmclist@temp.gmcnet.org
Sent: Thursday, February 27, 2014 12:36 AM
Subject: Re: [GMCnet] Yenko 427 engine on eBay (no GMC content)
Keeper,
You're right about the part about not being with the car. But you're
wrong on the word cheap. The bare block is worth 3 to 4k before
you send it to me for resurfacing and restamping to match the car.
Now, as of last May, I am out of that business, but before that I
was the premiere man in the country on resurfacing and restamping
Chevrolet engine blocks.
At the same time, if you had the car, that block would not pass judging.
Chevrolet Gang-stamped the VIN number and that one is obviously
hand stamped. Also the pad on the right front does not match the surface
at the edge of the head. Actually, it has no surface definition at all.
Possibly
a victim of "Mr. Belt-Sander". Just my formerly semi-Professional opinion.
Gary Kosier
77 PB w/500 Cad
Newark, Oh
-----Original Message----
From: anthony ezzo
Sent: Wednesday, February 26, 2014 1:27 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Yenko 427 engine on eBay (no GMC content)
$25000 ....Without the car its just another cheap old engine that needs
rebuilding constantly!
--
77 455 Elaganza II and 67 Animal, Built 500 Powered Eldo
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|