PlastiFix [message #236041] |
Sun, 12 January 2014 22:04 |
Pryzl1
Messages: 100 Registered: November 2011 Location: Toledo, OH
Karma: 0
|
Senior Member |
|
|
Last month I purchased a PlastiFix repair kit to restore the ABS grill on "The Never Ending Story". The repairs included reconstructing a missing threaded mount; forming a 3/4" square missing section of the grill; repairing hairline cracks and several nicks, chips and wear points found on the 37 year old grill.
The PlastiFix was easy to work, easily sanded to a feather edge and set-up fairly quickly.
The company literature states PlastiFix works on most rigid plastics such as ABS, PC, PVC, nylon, PET and fiberglass as well as glass, metal and wood. It DOES NOT WORK on PE and PP.
Just thought I would share my good experience using this product with the GMC community just in case the members using the Forum were not aware that this product exists.
Additional information , if your interested, is available at www.plastiFix.com
John
1976 GMC Eleganza II - "The Never Ending Story"
Partial Restoration - a work in progress
455cc
NW Ohio
Member of the GMCMI, GMC Great Lakers Motorhome Club, GMCES and Dixielanders
|
|
|
Re: [GMCnet] PlastiFix [message #236061 is a reply to message #236041] |
Mon, 13 January 2014 07:28 |
Kingsley Coach
Messages: 2691 Registered: March 2009 Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
John
Show us, show us..... <g>
Mike n NS
On Mon, Jan 13, 2014 at 12:04 AM, John Pryzbylek <pryzl@embarqmail.com>wrote:
>
>
> Last month I purchased a PlastiFix repair kit to restore the ABS grill on
> "The Never Ending Story". The repairs included reconstructing a missing
> threaded mount; forming a 3/4" square missing section of the grill;
> repairing hairline cracks and several nicks, chips and wear points found on
> the 37 year old grill.
>
> The PlastiFix was easy to work, easily sanded to a feather edge and set-up
> fairly quickly.
>
> The company literature states PlastiFix works on most rigid plastics such
> as ABS, PC, PVC, nylon, PET and fiberglass as well as glass, metal and
> wood. It DOES NOT WORK on PE and PP.
>
> Just thought I would share my good experience using this product with the
> GMC community just in case the members using the Forum were not aware that
> this product exists.
>
> Additional information , if your interested, is available at
> www.plastiFix.com
> --
> John
> 1976 GMC Eleganza II - "The Never Ending Story"
> Partial Restoration - a work in progress
> 455cc
> NW Ohio
> Member of the GMCMI and GMC Great Lakers Motor Home Club
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: PlastiFix [message #236063 is a reply to message #236041] |
Mon, 13 January 2014 07:47 |
rcjordan
Messages: 1913 Registered: October 2012 Location: Elizabeth City, North Car...
Karma: 1
|
Senior Member |
|
|
Thanks, John, I'll pick up a tube to test. My go-to patch material is MarineTex. Cons: Hard to work with, poor pot life, expensive. Pros: It will stand hard use. Stays fixed.
SOLD 77 Royale Coachmen Side Dry Bath
76 Birchaven Coachmen Side Wet Bath
76 Eleganza
Elizabeth City, NC
|
|
|
|
Re: PlastiFix [message #236123 is a reply to message #236069] |
Mon, 13 January 2014 20:57 |
Pryzl1
Messages: 100 Registered: November 2011 Location: Toledo, OH
Karma: 0
|
Senior Member |
|
|
I believe the manufacturer says yes. Check the website link.
John
1976 GMC Eleganza II - "The Never Ending Story"
Partial Restoration - a work in progress
455cc
NW Ohio
Member of the GMCMI, GMC Great Lakers Motorhome Club, GMCES and Dixielanders
|
|
|
|
|