| Exhaust system [message #226889] |
Thu, 24 October 2013 14:51  |
 |
Loffen
Messages: 1087
Registered: August 2013
Location: Norway
Karma: 1
|
Senior Member |
|
|
Hi
Who selling a complete exhaust system for std manifolds ?
I am not looking for headers or stainless steel system, just oem or close to it.
1973 23' # 1848 Sky Blue Glacier called Baby Blue and a 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Green,
And sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel
in Norway
|
|
|
|
| Re: Exhaust system [message #226892 is a reply to message #226889] |
Thu, 24 October 2013 15:12  |
Otterwan
Messages: 946
Registered: July 2013
Location: Lynnwood (north of Seattl...
Karma: 0
|
Senior Member |
|
|
| Loffen wrote on Thu, 24 October 2013 12:51 |
Hi
Who selling a complete exhaust system for std manifolds ?
I am not looking for headers or stainless steel system, just oem or close to it.
|
JimK at Applied:
http://www.appliedgmc.com/prod.itml/icOid/666
http://www.appliedgmc.com/prod.itml/icOid/667
Or any good muffler shop should be able to make one up for you, but you probably won't save any money in the long run.
On further investigation these kits are only for use with headers.
1977 Birchaven, Lynnwood WA - "We may not be able to stop all evil in the world, but I know that how we treat one another is entirely up to us."
[Updated on: Thu, 24 October 2013 15:15] Report message to a moderator |
|
|
|
| Re: Exhaust system [message #226912 is a reply to message #226892] |
Thu, 24 October 2013 17:54 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Jim K, definitely has GMC exhaust systems that for both the exhaust manifold and header 403 and 455 engines.
Give him a call or send him an email for more information.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
| Re: Exhaust system [message #226925 is a reply to message #226913] |
Thu, 24 October 2013 19:27 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I have seen that system multiple times because Jim usually brings one or two of them to the GMCMI rallys. There is an additional supplied pipe that goes from the exhaust manifold to the start of the exhaust system. This adapter pipe is not needed when headers are installed on the engine.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: Exhaust system [message #226926 is a reply to message #226925] |
Thu, 24 October 2013 19:39 |
tphipps
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
I installed the Iden system in my previous coach. Perfect fit and I had to chase nothing extra for it.
The big downside for shipping is the 13' length of 3" pipe that runs down the side of the frame.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
|
| Re: Exhaust system [message #226927 is a reply to message #226926] |
Thu, 24 October 2013 19:58 |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
| tphipps wrote on Thu, 24 October 2013 19:39 |
I installed the Iden system in my previous coach. Perfect fit and I had to chase nothing extra for it.
The big downside for shipping is the 13' length of 3" pipe that runs down the side of the frame.
Tom, MS II
|
GMC owner Joe C called Iden this week and Leigh said he no longer supplied the exhaust system.
Dennis
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
| Re: [GMCnet] Exhaust system [message #226933 is a reply to message #226927] |
Thu, 24 October 2013 20:35 |
werewilfs
Messages: 329
Registered: July 2012
Location: Rappahannock County, VA
Karma: 0
|
Senior Member |
|
|
Ken Frey has a nice system that he puts in. Not sure if he ships it anywhere though.
On Thursday, October 24, 2013 8:58 PM, Dennis Sexton <dennisfsexton@aol.com> wrote:
tphipps wrote on Thu, 24 October 2013 19:39
> I installed the Iden system in my previous coach. Perfect fit and I had to chase nothing extra for it.
> The big downside for shipping is the 13' length of 3" pipe that runs down the side of the frame.
> Tom, MS II
GMC owner Joe C called Iden this week and Leigh said he no longer supplied the exhaust system.
Dennis
--
Dennis S
73 Painted Desert 230
Germantown, TN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jared & Stefanie Kohl
Rappahannock County, VA
1973 Painted Desert "Onslow"
|
|
|
|
| Re: [GMCnet] Exhaust system [message #226940 is a reply to message #226933] |
Thu, 24 October 2013 21:16 |
Steve
Messages: 506
Registered: September 2013
Location: East Greenville, Pa
Karma: 1
|
Senior Member |
|
|
| werewilfs wrote on Thu, 24 October 2013 21:35 |
Ken Frey has a nice system that he puts in. Not sure if he ships it anywhere though.
Ken did excellent exhaust work on my coach.
On Thursday, October 24, 2013 8:58 PM, Dennis Sexton <dennisfsexton@aol.com> wrote:
tphipps wrote on Thu, 24 October 2013 19:39
> I installed the Iden system in my previous coach. Perfect fit and I had to chase nothing extra for it.
> The big downside for shipping is the 13' length of 3" pipe that runs down the side of the frame.
> Tom, MS II
GMC owner Joe C called Iden this week and Leigh said he no longer supplied the exhaust system.
Dennis
--
Dennis S
73 Painted Desert 230
Germantown, TN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
1978 GMC Royal
Eastern Pennslyvania
1968 Chevrolet C20 396 Camper Special
1969 Chevrolet C20 Camper Special
1985 Buick Electra Park Avenue
1992 Camaro 25th Anniversary Heretage Edition Black
|
|
|
|
| Re: Exhaust system [message #226952 is a reply to message #226889] |
Thu, 24 October 2013 22:39 |
GeorgeRud
Messages: 1380
Registered: February 2007
Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
I used JimK's two muffler system, and was able to install it easily by myself with the coach up on ramps and jack stands. The stainless pipes and wonderful connectors he supplies make the system truly a bolt on kit.
I did replace my manifolds with headers at the same time, but he does have a kit that fits the original manifolds as well.
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|
|
| Re: [GMCnet] Exhaust system [message #226960 is a reply to message #226889] |
Thu, 24 October 2013 23:10 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Espen,
The exhaust system in The Blue Streak Downunder is in good shape but I'd like to change from two mufflers up front to one down the
back. I checked with an exhaust shop near my shop and they said they could make it even though it's in inches.
Regards,
Rob M.
The Pedantic Mechanic
USAussie - Downunder
USA '75 Avion - Double Trouble TZE365V100426
AUS '75 Avion - The Blue Streak TZE365V100428
-----Original Message-----
From: Espen Heitmann
Hi
Who selling a complete exhaust system for std manifolds ?
I am not looking for headers or stainless steel system, just oem or close to it.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
