Spare tire carrier [message #226851] |
Thu, 24 October 2013 11:36 |
JJUNKSELL
Messages: 58 Registered: July 2013 Location: MERIDEN CT
Karma: 0
|
Member |
|
|
Hi all I have a spare tire carrier that has small bends in the mounting plates that go to the frame. are these bends stock or should I straighten them? The reason im asking is I have to weld some pipe on because of the pipe on the carrier being rusted out on the mounting plates.so b/4 I weld I want to straighten the plates if thats the way it was stock. Thanks Dave
Dave, 76 PB moneypit.Center of CT.
[Updated on: Thu, 24 October 2013 15:30] Report message to a moderator
|
|
|
Re: [GMCnet] Spare tire carrier [message #226864 is a reply to message #226851] |
Thu, 24 October 2013 12:50 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
If the spare tire carrier bolts to the frame properly I would not mess with them.
Regards,
Rob M.
The Pedantic Mechanic
USAussie - Downunder
USA '75 Avion - Double Trouble TZE365V100426
AUS '75 Avion - The Blue Streak TZE365V100428
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of DAVE KELLEY
Sent: Thursday, October 24, 2013 11:36 AM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Spare tire carrier
Hi all i have a spare tire carrier that has small bends in the mounting plates that go to the frame. are these bends stock or should
I straighten them? Thanks Dave
--
Dave, 76 PB moneypit.Center of CT.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|