Led running lights [message #225831] |
Wed, 16 October 2013 11:33 |
JJUNKSELL
Messages: 58 Registered: July 2013 Location: MERIDEN CT
Karma: 0
|
Member |
|
|
Hi all was going to put the led running lights on but found that the steel inserts are bad. What can i use to replace them? Thanks Dave
Dave, 76 PB moneypit.Center of CT.
|
|
|
Re: Led running lights [message #225844 is a reply to message #225831] |
Wed, 16 October 2013 12:55 |
Jim Rountree
Messages: 47 Registered: July 2010 Location: San Antonio, TX
Karma: 0
|
Member |
|
|
I used what many coaches were built with
Grainger Catalog
P/N 3ZLU6
Jacknut
And I used a cap bolt since it has a hex internal drive and is more removable than a screw driver screw.
The old jack nuts can be destroyed easily and carefully to not damage the existing hole in the coach cap. Just collapse the old top with vice grips and them fish out the remaining piece one at a time
Jim Rountree
San Antonio,TX
76 PB,
76 Royale RB
|
|
|